Having problems with your Hoover Vacuums ?

Removing nozzle on Hoover Steamvac

\015 I have the Hoover Steamvac All Terrain Carpet & Hard Floor Cleaner. Instructions for removing nozzle to clean or add squeege are unclear. Lift up rear edge of nozzle? It doesn't lift off. There are clear plastic tabs that I'm afraid I'll break. Can you offer any help? Thanks\015

Answers :

I'm sure you have found a solution to this problem by now, but I am having the same problem removing the nozzle, and just read another persons post where they suggested buying the "Nozzle Clean-Out Tool" available on Hoover's website for $1.00 plus $5.00 in shipping. The part number is 39514001. It worked for this person, so I'm going to try it. Not a big investment, at least, in case it doesn't work!
Repair Help & Product Troubleshooting for Hoover Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Removing nozzle on Hoover Steamvac


I'm sure you have found a solution to this problem by now, but I am having the same problem removing the nozzle, and just read another persons post where they suggested buying the "Nozzle Clean-Out Tool" available on Hoover's website for $1.00 plus $ ... Hoover Vacuums

Have Hoover SteamVac Model F5835-900. Has gunk under the front clear hood where water/debris is lifted from carpet to the tank. Wife wants me to remove clear hood to clean; however the hood cannot come off without damage. Can I safely remove this hood?


There 2 screws on the bottom edge, one on each side, then there is a ***** on top at just beyond the lip of the window. Then it will come off of the machine. \015\012\015\012 ... Vacuums

Hoover steam vac tank releaser latch removal - Hoover F5858-910 SteamVac Vacuum


... Hoover F5858-910 SteamVac Vacuum

Hoover steamvac upholstery nozzle does not spray


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Hoover 5899-100 Steamvac. The hose is cracked at the bottom. I am going to order a replacement hose, but can't figure out how to remove the old hose. are there instructions out there to do this.


... Vacuums

How to remove hose from a hoover steamvac


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

How do you remove the water tank - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


Hi,\015\012At the top of the water tank is a latch. Pull down on the latch and tilt it out and downward.\015\012Best regards, --W/D-- ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Broken Upholstery hose on my Hoover SteamVac Model #F6020. How do I remove the old hose to replace it?


... Hoover F6020-900 SteamVac Upright Vacuum

Water wont come out the nozzles - Hoover F5411 SteamVac Jr. Canister Vacuum


Its plugged up somewhere along the hose or not connected correctly ... Hoover F5411 SteamVac Jr. Canister Vacuum

How to remove a single brush from brush rack - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Remove clear plastic cover on hoover steamvac


... Hoover F5906-900 Upright Steam Vacuum

Hoover steamvac Model F5808 I took off the nozzle cover to clean out the hair and fuzz buildup and put it back on correctly. But now it won't **** up any water... what could be wrong?


... Vacuums

My Hoover SteamVac is spitting out dirty soultion from the recovery tank, it seems. I have removed the clean solution tank and turned it on to **** up what was soaked into my carpet and it just kept spitting out slowly. When I first turn it on, it spits out a tremendous amount. What could be causing it to spit out solution?


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How do you remove the brushes on a hoover steamvac to clean them?


Hoover makes running changes on these style steamvacs without changing the model numbers. One of the following or both. \015\012 \015\012Four tabs (opaque/white in color) about a 1/4 of the way in from each corner of the plastic ... Hoover F5870-900 SteamVac Vacuum

Steamvac Hoover Were you able to remove the turbine? I just can't find the way to do it. Can you help? Eddie [email protected]


Hi,I am not sure if you will be able to view my solution in your Premium Problem re: Hoover SteamVac F7222-900. With your indulgence, I took th ... Hoover F7220900 SteamVac V2 Upright Vacuum

I have a hoover 3000 i have not used in awhile, and since I removed a large rug, I would like to use it again on my slate floor. HOWEVER, I cannot get it to pick up ANY water in the water recovery unit......it is dry, dry, dry. I have put in a new filter, cleaned the nozzle unit, the scrubber , and reconnected both the recovery unit and the water unit several times, but to no avail. I would like to get a graut attachment a well as replacement part, but since I can't get the basic unit to work, I


Have you made sure the plastic filter cover with the round hole in it that covers the filter is in place ( part # 59177096 ). This piece seems to get lost, and without it there is no pick-up. The other common problem is that the wheel assembly has be ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Cannot find where toput the nozzle - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Hoover Steamvac model F5808. It no longer sucks up the water and seems to only blow air. I already removed all the hair and fuzz buildup... what could be wrong? I no longer have the manual to look at.


... Vacuums

I have a Hoover SteamVac spot cleaner, model F5505. This is an older cleaner. It has no suction and I believe the hose may be clogged, but don't know how to remove the hose and check it.


... Hoover F5505 SteamVac Spot Vacuum

I have a Hoover steamvac F5872. How do I remove the brush?


... Hoover F5872-900 SteamVac Wet/Dry Vacuum

Hoover steamvac ls edition, model f5894


... Hoover F5807 SteamVac Wet/Dry Vacuum

Hoover SteamVac brushes aren't turning ...


Sometimes this speed knob can be really stuck on there. Even if you were to break off the part that the knob sits onto, this part is actually part of the turbine assembly, and the new turbine assembly would have that prong that the button sits on. ... Hoover V1 SteamVac SpinScrub Vacuum

Hoover SteamVAc LS - brushes turn slowly


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How do I clean the nozzle of my Hoover steam vac Jr?


No, this assembly can only be rinsed under running water. ... Hoover F5411 SteamVac Jr. Canister Vacuum

Hoover steamvac lost suction - Hoover F7431-900 SteamVac Vacuum


... Hoover F7431-900 SteamVac Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0441 seconds