Having problems with your Hoover Vacuums ?

I want to change the light bulb on my hoover elite 600 upright vaccum. How easy is it to do and where do I start? Thanks! Brian

Answers :

It should be fairly easy.

You will need a flat-edged screwdriver to pry up the white/opaque plastic diffuser that covers the light - the bulb is in a socket underneath it.

Pry up an edge of the diffuser with the screwdriver and you should be able to see that it's held on with 4 tabs - two on the top and two on the bottom. Push the tabs in on either the top or bottom and the cover should pop out easily.
Repair Help & Product Troubleshooting for Hoover Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want to change the light bulb on my hoover elite 600 upright vaccum. How easy is it to do and where do I start? Thanks! Brian

It should be fairly easy.You will need a flat-edged screwdriver to pry up the white/opaque plastic diffuser that covers the light - the bulb is in a socket underneath it.Pry up an edge of the diffuser with the screwdriver and ... Hoover Vacuums

Light bulb change on Lux 4000 upright, light at base piece infront of spinning brush, made to look like long thin bulb due to plastic covering, how to open to change bulb 15 watt

... Electrolux Vacuums

The check bag light comes on and vaccum quits but bag is not full. We changed bang anyway but vaccum would not start.

This is most probably due to a worn out or clogged Control Valve Assembly.Detach the hose and see if it runs. If it does, place hand over hole. If it shuts off, CVA is probably the cause. A clogged CVA is generally due to using gene ... Electrolux Guardian Bagged Canister Vacuum

How to change light bulb in Hoover upright U5209-930 vacuum cleaner

... Hoover U5117-900 Bagged Upright Vacuum

Have the cannister 6500 SP just changed all filters but when I start the vaccum it shuts itself back off and the full bag indicator light comes on?

It sounds like the valve assembly (full bag control) is faulty. Threr are two O rings inside of it and the plactic holding the bottom one has broken. You'll have to take it to the shop. ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I was vacuuming and noticed that the bag needed changing. the red light with the ! inside the triangle also came on. When the bag was changed, the vacuum would not restart. The red light came on. Tried the reset button but nothing happened. Tried unplugging and re-plugging in and nothing happened. Replaced all the filters and still it wouldh't start. So I brought it downstairs and tried one more time to get it to start. it worked! Is there something wrong with the vacuum cleaner? Was it overheat

It was overheated that is why it worked downstairs after cooling off. ... Miele S548 Bagged Canister Vacuum

I was changing a light bulb with one of those metal extension rods that unscrew and screw back in the replacement bulbs. It evidently didn't seat correctly and pulled off the bulb and created a quick "poof" type electrical short. I have switched out that bad bulb with a new one and can't get either the fan or lights to work. There doesn't appear to be a reset switch. I also swirched out the wall switch to see if that would make a difference and it does not. Any thoughts or ideas would be appreci

If you have not already done so, I would check at the fuse or circuit breaker panel to see if you have blown a fuse or tripped a breaker. ... Vacuums

I have a ceiling light with a holgen bulb that I cannot figure out how to change. The fixture has an outer ring against the ceiling and an inner ring that has the light. The inner ring tilts. I have not idea how to get into it to change the light!

From what I know you are suppose to change the whole thing. ... Alto 302000414 Attix 8 AS/E Canister Wet/Dry Vacuum

I have a light ballast that stopped working. The lights around this one bulb still work but changing the light bulb did not fix the problem. Any idea what is going on here?

The ballast is like a fuse and the ballast is blown .\015\012you will need to replace the ballast as it will let current thru for some bulbs but not enough to light them all up.\015\012also if you use old bulbs that are alomst blown and n ... Vacuums

Won't start. My son was using the vacuum & Didn't change the bag. The vacuum was making the full bag smell, but the light was't on & it didn't stop. I stopped him, changed the bag, checked the filter, closed the compartments & turned on the vacuum. Nothing happened. I checked to be sure that it was plugged in, that wasn't the problem. I've let the vacuum "rest" for several days, It still won't start. Any suggestions?

There is a reset button at the back of the powerhead. The user manual can be downloaded from the electrolux website, although I didn't find it very useful. There was some info on how to change the powerhead drive belt. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have a Kenmore Progressive upright model 216-37100800. It is only around 1.5 years old. My wife said that one day after she plugged it and turned it on, it whirred up but then shut off. Since then it will not start. I have noticed that right after I plug it in, if I try to turn it on, the first yellow light in the series of dirt sensor lights turns on then shuts off. After that the light will not light up on pressing the power button, unless I unplug it and plug it back in again. I have seen o

... Kenmore 25512/ 25513 Progressive Canister Vacuum

Change light bulb

Ok just like you would change the belt take screws out of top the cover should come off inside there is a plastic cover take it off theres the bulb ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Where can I buy a Bosch Turbo Jet Upright Vacuum (BUH11700UC) light bulb?

... Bosch Turbo Jet Bagged Upright Vacuum

Singer 7105 how to change light bulb

... SewShop.com Singer Model 7105 Instruction Manual

Vacuum cleaner does not start after getting warm, bag, that was full is changed, lights run across dispaly at top when I try to start it, cannot find my manual, can I download a manual for Excellio z 5240. Is there a fuse of something that has bo be reset?

... Electrolux Vacuums

I have a halogen light bulb with a frosted glass cover over it. How do I remove the cover to change the bulb?

... Vacuums

My bissell power force bagless turbo 12 amp upright vacuum (red and black color) is very loud! It started about 8 months after I started using it. I wash and dry the filters about every 6 weeks and there is no change after all that.

... Bissell 6594 PowerForce Bagless Upright Vacuum

Problem with electrolux z370a.Plugged in pressed start switch no lights come on,changed fuse still no lights but heater and temp gauge is working

Hi, try to determine if the power source is working properly if the Electrolux will not turn on, Make sure it has not come unplugged and that you do not have a blown household fuse. If necessary, reset the circuit breaker to regain power to the outle ... Vacuums

I have a Hampton Bay ceiling fan model #EC2T-36 HPF. We broke the globe that covers the light bulb when we were changing the bulb. Just wondering if you could tell me where I can buy a new globe cover?

... Vacuums

WST 1600A I purchased this vaccum about four months ago from Heartland America. Up to this point it's worked fine. After cleaning it this time when I went to start vaccuming again it runa for about 10 seconds and cuts off. I've changed the battery, taken everything that can be removed out checked it and replaced it. THe motor sounds like it's straining. I have not taken the housing off the motor to see what's going on with that. I misplaced my manual.

It sounds like there is a clog. If there is no air flow it could be overheating. ... Westinghouse WST1600 Upright Vacuum

I bought a ceiling fan from lowe's, got it home got ceiling fan up in the bathroom, when we put in the light one of the halogen bulbs does not work , also two of the cobalt blue glass covers are cracked all the way through and one of the halogen light protectors also had a whole in the end of it. I called Lowe's they told me to contact you; day of purchase was 3/1/08 in Florence Al. store code # 04810-30108. Ceiling fan bar code 0 2403478512 2. 228365 52" Helix Chrome and Cobolt ceiling fa

If this is a new product and it is defective, take it back to Lowe's and insist on a replacement, talk to the manager if you have to. This site will only advise you on how to fix it. ... Vacuums

Electrolux oxy 3 vaccum has stppoed working and all three blue lights flashing My electrolux oxy 3 ZO6330 stopped working suddenly and all lights are flashing. I've changed the bag and filter and its still not working. Any ideas??

... Electrolux Vacuums

Floor attachment starts (green light) and then, almost immediately stops (red light). I have cleared all built-up dust in the unit, but no change occurred as a result.

Step on the blue lever at the base of the floor attachment to separate it from the long wand. Sometimes there is a clog inside at the base that needs to be cleared. Good luck. ... Fantom Vacums Lighting Canister Vacuum

How to change belt on Hoover Elite supreme - Hoover U5227-930 Elite Upright Vacuum

Hello. go to http://www.hoover.com/pdfs/manuals/U6454900.pdf\015\012for step by step directions. Joe ... Hoover U5227-930 Elite Upright Vacuum

Sebo upright vacuum cleaner - Bag full or clog light on constantly when using as an upright but not when using detachment pipe. Bag changed and no sign of blockage. Is this a common fault or does it need to be taken apart by an authorised repairer?

Hello,\015\012\015\012I have actually written an in depth trouble shooting guide on how to find the clog in your Sebo. Since this light is coming on only when you have the wand inserted into the vacuum and are vacuuming the floor, this i ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1019 seconds