Having problems with your Hoover Vacuums ?

My brushes don't rotate on the on position. I have a SteamVac V2.


Answers :

Do you hear the motor for the beater bar brush running? If so, you'll probably need to replace the brush drive belt.. If not.. you may have a broken wire suppling power to the brush motor.. or the switch is bad.. Hope that helps..
Repair Help & Product Troubleshooting for Hoover Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My brushes don't rotate on the on position. I have a SteamVac V2.


Do you hear the motor for the beater bar brush running? If so, you'll probably need to replace the brush drive belt.. If not.. you may have a broken wire suppling power to the brush motor.. or the switch is bad.. Hope that helps.. ... Hoover Vacuums

The brush does not rotate at times. The belt is ok. It will not rotate in the stored position, but starts when I drop it to the other position, but not always!


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Spin brushes spin freely on steam vac when not attached to cleaner indicator screen not dirty speed selector is in high position brushes are clean spin brush indicator when brushes attached to machine does not rotate


If this is a Hoover Steam vac, the turbine which drives the brushes is bad. If not a Hoover, then what is it, they are different, need brand and model number. ... Vacuums

How do I change the belt on a Hoover Steamvac Model # F5905-900. The brushes are not rotating strong enough. They rotate while they are off the carpet but once you lower them to the carpet they stop rotating.


... Hoover F5905-900 Vacuum

Dyson dc07 The rotating brush on the bottom of my vacuum was filled with strings. I removed the brush by undoing all yellow plastic screws from plate. Removed all strings and replaced as best I could and it was hard to get the brush back in and the belt around it. I dont have my manual but it fits so it should be correct....? Right? No, not true, because when I turn it on and try to and vacuum (by lower canister with foot release) it makes that terrible ratching sound). Please help


The loud ratching is a warning to tell you that there is something stopping the roller bar from rotating this is a very common thing lay the machine on the floor front side down take off the bottom plate and just check the belt is in the centre of th ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The rotating brush bar won't turn after i cleaned all the tangled hair and string off of t ,... I don't think i positioned the brush bar back in to the correct place that will connect ,,can you PLEASE help me?


Hello pmoongoddess. Here is a list of dyson vacuums with the parts diagrams for each one. Find your model and then open up that parts diagram showing the rotating brush component. It will show you exactly how it is positioned. I hope this helps. ... Dyson Vacuums

Rotating brushes don't rotate - Hoover F5872-900 SteamVac Wet/Dry Vacuum


Check belt, may be broken or may have come off the brush bar and replace. ... Hoover F5872-900 SteamVac Wet/Dry Vacuum

HOOVER STEAMVAC Model# F5842-9RM 120v 12 amp Carpet Cleanerworks well. Hooked up upholstrey attachment, used it. Reassembled to standard operation, the aggitator brushes do not work. I dis assembled brush insert verything good. ran cleaner and the square hole that the bushes insert into did not rotate with cleaner on. turned off lightly tried to turn mechinism in machine no luck. Reassembled aganin, reinserted cleaning tool, then disconnected it. agitator still doesn't work. toggled switch


... Hoover Vacuums

I have a Hoover Agility Steamvac and the brushes will not rotate. I have cleaned the filters and the the "brushes on" feature has been selected. Any suggestions on what else I might try to get it working?


You have a broken brush bar belt. Just simply replace it with a new one. This is very cheap and easy to fix.Pull the cover off of the bottom of the Vac and the belt will be there. If it's not broken then it is still stretched to the point ... Hoover Vacuums

Loud rotating carpet brush noise: Just got my new Shark Navigator, but it makes a really loud noise when I turn it in the position to clean carpets. Is this normal?


... Shark Navigator Bagless Upright Vacuum

Brushes not rotating on hoover f7425-900 steamvac v2


I had the same problem and it was inside the turbine assembly. If you take the turbine assembly off the machine and open it up, you will see the turbine blades on one side and the reduction gears on the other side. The problem on mine was a needle ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

My Hoover Steamvac- the brushes are not rotating neither L or H


My hoover steamvac the brushes are not turning what makes the blue triangle that the brush attachement fits to move? ... Hoover F5900-900 Upright Steam Vacuum

I need the manuel for the hoover steamvac deluxe 5 rotating brushes . the model is F5864-900


Http://www.vacshopusa.com/pdf/hf5837900.pdfHere is the schematics ... Vacuums

I have recently replaced the belt and filters. The belt is in the correct position and the rotating brush moves freely. The motor is very loud. It still vacumns but I'm afraid the motor will burn up.


Does it sound different than it did before you made the repairs to it or does it sound the same. Just so you know some of the upright vacuums on the market today sound like a jet airplane landing in your living room.Ca ... Bissell 6594 PowerForce Bagless Upright Vacuum

Rotator brush not spinning. Handle is not in the locked upright position. Says it's beltless, so is this likely an interlock switch or drive motor problem ?


Hi, the brush roll will only spin when your handle is not in the locked upright position, once the handle goes upright - the brushroll de-activates ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Hoover Steamvac Deluxe with 5 rotating brushes


... Hoover F5888-900 SteamVac Upright Wet/Dry Vacuum

I lost the manuel for my hoover steamvac ultra. it has 5 rotate brushes.


Http://www.hoover.com/CustomerService/Manuals/Default.aspx \015\012 \015\012This is the link to the Hoover manuals. Hope t ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Brushes are not rotating - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


The Hoover SteamVac's are notorious for this exact problem. There are several things that can be causing this problem.First, what you'll need to do is take the brush block out of the machine. To do this there are 4 clips on the brush bloc ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

F5860-900 Hoover Deluxe Steamvac with 5 rotating brushes


... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

On hoover steamvac F7425-900 brushes do not rotate. I have cleaned the filter


May be the motor is the problem ... Hoover Vacuums

My brushes wont spin and i dont know why - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


Your belt has broken and therefore the brush isn't spinning. You can find any vacuum belt at www.vacbelts.com. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Brushes will not rotate on my steam vac - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


I'm sorry to tell you that you have a broken drive brush. One of the brushes has a stem, and that stem is broken. See if you can remove the brush assembly - I believe it pulls straight down. See if one of the stems is a little longer than the othe ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Why did the brushes stop rotating? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Please check two things: \015\012(1) The shutoff switch on the hood is NOT set to OFF for brush speed.\015\012(2) Remove the red filter panel from under the cleaner, behind the brushes, and clean the hair/debris from the screen filter. S ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Why did the brushes stop rotating? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


It could be a few different reasons, 1. The belt is broken, 2. The motor has died, 3. There is an obstruction, or some such thing stopping the bar from rotating (often hair and/or string) 4. The contact switch is defective. (switch that turns beater ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brushes won't rotate. I have cleaned filter on bottom and properly placed the spin mode selector in the correct position.


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0438 seconds