Having problems with your Hoover Vacuums ?

I can't figure out how to change the belt on my hoover bagless Sprint upright. Please help.


Answers :

1 set up vacume with bottom facing you , making it easy to deal with.
\015\0122 remove the 4 screws holding base plate on and carefully remove the base plate, on mine there is a small catch that must be released.
\015\0123the belt compartment is on the right, remove the old belt, it's about 1 and 1/4 wide.
\015\0124 You have to put the belt on the stainless steel motor spindle first, then work the belt over the plastic drive wheel, and spin it around a few time to ensure it's running on track ok.
\015\0125 Replace the base plate , click in the self catching clip last.
\015\0126 Replace the four screws and test the vacume.
Repair Help & Product Troubleshooting for Hoover Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can't figure out how to change the belt on my hoover bagless Sprint upright. Please help.


1 set up vacume with bottom facing you , making it easy to deal with.\015\0122 remove the 4 screws holding base plate on and carefully remove the base plate, on mine there is a small catch that must be released.\015\0123the belt compartme ... Hoover Vacuums

Need help to change belt - Hoover U8188-900 Bagless Upright Vacuum


Click here > http://hoover.com/file/523/ for the manual with instructions ... Hoover U8188-900 Bagless Upright Vacuum

Change belt on hoover savvy bag and bagless upright vacuum


... Hoover U8155-900 Savvy Bagged Upright Vacuum

Cannot figure out how to change Hoover duros canister vac bag. Have Hoover SR bags for model #401010SR. Please help! Thank you.


... Maytag Hoover Duros S3590 Vacuum (Canister)

Need to change belt on hoover upright model u5093-900, but can't figure out how to open it up to get at the belt.


... Hoover Vacuums

I have a Hoover Windtunnel Farrington upright model U6431-900 It has worked flawlessly until last week. The roller brush has stopped turning and I believe it is the belt that has broken but I am not sure how to remove the cover to inspect it and replace the belt if that is the problem. Please inform me how to perform the operation and what I should I look for? Is there a site with a diagram on how to replace said parts? Thanks for any and all helpful info that you can supply me with. Larry


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=783264\015\012Generic problem for all Vacuums\015\012I have a Hoover WindTunnel\015\012Posted by ... Vacuums

Change belt on hoover whole house - Hoover Whole House Bagless Upright Vacuum, UH71214


... Hoover Whole House Bagless Upright Vacuum, UH71214

Is there a diagram/picture to help me visualize how to put cleaner belt back in vacuum? I was taking base of vacuum apart so I could get rid of hair that were wrapped on the roller. The cleaner belt came to loose and I could not figure how to fix it back. the model is eureka upright bagless series 430


Hi,Sorry to hear your belt fell out. Not good if you've never replaced a belt before...Here is a website where you can read a detailed description of how to change a belt: http://www.ehow.com/how_8034505_eureka-belt-replacemen ... Eureka 431A Optima Bagless Upright Vacuum

I have an old upright hoover vacuum. I need to change the belt but can't figure out how to get to it. The bottom plate over the roller brush comes off but I can't get anything else off to get to the other end of the belt.


Model no. req ... Hoover Vacuums

How to change belt on hoover savvy vacuum - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


How do I change the smaller brush belt on a Hoover Windtunnel Cyclonic? ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Model UH70120 Hoover Wind Tunnel T Series Rewind Model UH70120 purchased at Target - bagless How can I put on the new Belt? I have taken it apart but cannot figure out how to change the belt. How?


... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

I have the Bissell upright cleanview bagless vacuum cleaner. My belt broke and someone else took it off. I bought a new belt but do not know where it goes on the cleaner. Please help


Easy to do. Unplug the vac. Turn the vacuum over and look for three finger latches on the bottom behind the brushes. Unlatch these and pull the faceplate off. Then, grab one side of the brush and pull straight up (they just sit in grooves on the ... Bissell CleanView 3596 Bagless Upright Vacuum

How do change belt on Hoover U5163-900 - Hoover Fold Away U5162-900 Bagless Upright Vacuum


... Hoover Fold Away U5162-900 Bagless Upright Vacuum

I have a Zanussi 1700W bagless upright vacuum cleaner which keeps cutting out after about 5/10 mins use. I had to replace the rubber drive belt which snapped not long after purchasing and it was fine for a while, but now its just keeps cutting out after a small amount of use. Nothing wrong with belt which is still intact so we don't know what the problem is. It's a great cleaner otherwise - but it's driving us mad!! Please help!


... Vacuums

I have a DC04 which is a number of years old and has started making an awful grinding sound, I'm sure it is the belt which I sprayed with WD40 and this helped for a couple of seconds but as soon as I recline the hoover it makes this noise but not when upright and using the hose. Does anyone have any ideas or how to change the belt? Thanks


You have to change the belt look it up with your local vacuum store. ... Vacuums

Changing belts - Hoover U6616-900 WindTunnel Bagless Upright Vacuum


You can find the instructions with diagrams on pg 10 in the manual http://www.hoover.com/pdfs/manuals/U6616900.pdf ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

I am trying to find out a part number for a rubber gasket that goes on the inside of a Hoover Windtunnel Cyclonic Platinum BAgless upright. It is a very thin, light-weight gasket made of rubber that helps seal the filtering tubes. If you know where I can find a parts break down, please advise,,, JON [email protected]


Hi There,\015\012\015\012I'm not sure exactly which part you are asking about, so I went ahead and uploaded the parts schematic of your vacuum cleaner, that will diagram all the parts, and part numbers.\015\012\015\012If you n ... Hoover UH70015 Bagless Upright Cyclonic Vacuum

Change the belt - Hoover Nano Cyclonic Compact Bagless Upright Vacuum, UH20020/W


... Hoover Nano Cyclonic Compact Bagless Upright Vacuum, UH20020/W

How to change the belt on u5025-900 - Hoover U5025-900 Bagless Upright Vacuum


Flip over the machine so that you can see the brush. There should be 4 or 5 screws to remove to access the brush roller and belt(s). If you have more than one belt in the unit it may just be the flat belt that needs to be replaced and not the V-groov ... Hoover U5025-900 Bagless Upright Vacuum

I need to change the small belt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Just remove the cover on the bottom of the vacuum by loosening the screws holding it on. Once they are off, you'll be able to slide out the rotating brush, and you'll see the belt there. Look inside the vacuum also, as when they break, they can sprin ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I need a manual to change the belt on my Shark red upright vacuum model number UV210BV..please help ASAP...Thanks


... Euro-Pro Shark Professional Upright Vacuum with Bonus StickVac Red Bagless Vacuum

How do I change the belt on the motor? - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Hi. This is easily done. Flip the vacuum over, beater bar up. With the machine unplugged, locate the screws or tabs that hold the base plate on, surrounding the beater bar. Remove the plate. The beater bar is held in place by fitting into socket ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Brush on underside not working, please help. - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Turn the unit over and remove the four screws that retain the bottom plate over the agitator. Remove the bottom plate and see if the belt of off or broken. The belt part number is printed on the data label for the cleaner. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I can't change belt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832643\015\012Generic problem for all Vacuums\015\012I can't change belt\015\012Posted by jaw53t on Jul ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

No manual. I have no manual or instructions for filter changes for the Hoover DM4494 Upright Bagless Vacuum Cleaner. Please advise. Thank you.


The manual is located here: http://www.hoover.com/pdfs/manuals/U5194900.pdf ... Hoover U5194-900 Mach5 Multi-Chamber Cyclonic Vacuum Cleaner Bagless Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1574 seconds