Having problems with your Hoover Vacuums ?

I need to switch on my thermal protector on my hoover

\015 I need to get to the motor and none of the manuel's I've looked give much information. What I have been able to find out is that the protector is located on the left side of the vacuum.\015

Answers :

FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Normally there are either screws, clips or levers that would remove the bottom plate or lid that does not work then the top cover will come off and that will expose the belt of the hoover from there u can continue further by opening the locks with proper screwdriver.and then the motor can be seen.
Repair Help & Product Troubleshooting for Hoover Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to switch on my thermal protector on my hoover


FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Normally there are either screws, clips or levers that would remove the bottom plate or lid that does not work then the top cover will come off and that will expose the belt of th ... Hoover Vacuums

My brand-new Hoover Windtunnel T-Series Pet Rewind Bagless vac simply shut off while I was using it and now I can't get it to turn back on. I've emptied the dirt collection bin and let the unit sit unplugged for 30 minutes to reset the Thermal Protector as per the manual. I've even tried a few different outlets just in case a fuse got tripped, but the vac still won't turn on. What happened? Do I need to return this vac to the store? I just bought it 5 hours ago.


... Hoover Vacuums

Hoover Alpina 2 1300 cleaner. I need to split the upper and lower casings to check that the switch is working. I have removed the screwa in the area around the bag, but now need to remove the switch and cable rewind covers, as I assume there are more securing screws under them. Can you advise how to do it please?


Move covers (forcibly !) away from the centreline of cleaner then move to rear until released. The covers are held by slide catches on inner edges. ... Vacuums

What's your problem?I have to replace the power switch on my Hoover U6485-900. What part do I need to orer? Wher can I order it?


... Hoover U6485900 Bagged Upright Vacuum

I have a Hoover WindTunnel Model # U6445-900. The on/off switch needs to be replaced and I'm not sure what parts are needed to repair it. Thanks Gloria


You can order any parts needed at the below link. This is a parts diagram. The switch kit doesn't have a part number here, but it's the second item on the list.\015\012\015\012 ... Hoover Vacuums

Need an on/off switch for a Hoover Windtunnel Canister S3639


MY WINDOW EXPLORER IS NOT OPEN ... Hoover S3755 WindTunnel Bagless Canister Vacuum

I have a WindTunnel Hoover vacuumn that is less than 1 year old. The on-off switch is worn out and the carpet height adjuster does not connect. Where is my closest service center? (So I can use my warranty) My zipcode is 58203. My phone number is: 1-201-791-3492. My email address is: [email protected] Of course, I need help as soon as possible. Thank you, Audrey Cooper


According to Hoover's web site the closest service center is \015\012\015\012\015\012\015\012MJB MAYTAG HOME APPL CENTER \015\012418 BELTRAMI AVE NWBEMIDJI MN 56601 218-751-2420\015\012which appears to be over 100 miles from you. I have ... Hoover Vacuums

I have Hoover whisper Cyclonic. I just opend beacuse it was showing Clogged. I removed all dirt etc from the belt and now roller are not moving round and the smell of burning is coming due to rubber not moving on the roller. I looked at the manual which tells me in cased on roller being Jamed if need to use the stich to reset. I looked all over could not find the switch. Can you guys help me please.


... Hoover Sh40080 Zen Whisper Bagless Multi-Cyclonic Canister Vacuum

My Hoover uh70070 just turned off and won't start. I just bought it ab. is there another switch I need to check>out 1-2 months ago


... Hoover UH70070 Bagless Upright Cyclonic Vacuum

How do i replace thermal protector hoover u6430-900


... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

Hoover steamvac f6020-900 leaks water with switch off and in upright position, can't find the leak in either clean or dirty water tank. also need a owner/maintenance manual.


... Hoover F6020-900 SteamVac Upright Vacuum

I need to replace the cord on an older Hoover upright, model S660, about 1986 vintage. The cord broke where it enters handle. Handle comes apart easily. Just not sure how to pop the switch out without breaking it. Was looking for a manual online to see parts diagram and/or instruction on disassembly and cant seem to find one for that old of vacuum.


Check ebay. those vacuums are worth fixing. I loved them. they would **** the carpet off of the floor! those cords aren't hard to replace.just remember the way you got the old one out. ... Vacuums

S bag and filter show a red light briefly after switching on hoover. I can not find my instructions and want to know if I can still use the applicance or need to replace filter and if so how.


... Electrolux Vacuums

Hoover HU4197T - need to replace cable - how do I access connections to switch?


... Hoover UH70015 Bagless Upright Cyclonic Vacuum

I have a Hoover U5753-960 upright, I need a new on of switch for it.


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=539049\015\012Generic problem for all Vacuums\015\012I have a Hoover U5753-960 Upright\015\012Posted by amoser o ... Vacuums

I have a Hoover Slider, Model #S2105, Serial #050500084989, and I need instructions on putting it back together; with parts and assembly of parts. I took it apart because it was making a noise, and I believe one of the belts had come off. However, when I took the screws out of the bottom to check the belts, the whole thing fell apart. Now I can't get back together properly. It will not come on, and I believe it is because the switch that makes it come on when you lower the handle is not posi


Greetings from GoVacuum,\015\012\015\012Please see the link below for a parts schematic to your Hoover Slider, hopefully this will help you put the machine back together. If you find a part that is missing, and would like to order one, j ... Vacuums

Thermal protector - Hoover UH70070 Bagless Upright Cyclonic Vacuum


... Hoover UH70070 Bagless Upright Cyclonic Vacuum

Thermal Protector activated and won't turn off on Hoover Em upright bagless


Been there... done that. Vaccuming fine powder can interfere with contact of the brushes against the armature of the motor. You can turn it on and off all you want, but if the brushes have a coating of fine powder on them the motor won't run. If ther ... Hoover U5262-900 / U5260-900 / U5266-900 / U5268-900 EmPower Bagless Upright Vacuum

Dismantle hoover sc211 . The auto cable rewind does not work and I need to split the machine. I have removed alll visible screws, but there must be some hidden screws at the switch end>


... Hoover Vacuums

Does the motor overheat switch need to be replaced if it has tripped and reset on Hoover model u3940


Most of the Hoover overheat control switches reset when you UNPLUG the cleaner, and let is cool down for twenty minutes with the cord unplugged. ... Vacuums

The thermal motor protector on sears model 116.35912 Kenmore vacuum won't reset. The manual says to wait 30 minutes and the thermal protector will reset on it's own. It appears I would have to take the vacuum apart to get to the thermal protector. Is it worth the effort or should I trash the vacuum?


... Kenmore Vacuums

Hetty hoover not working. It was working ok until I opened it up to search the bag for a missing jigsaw piece and I put it all back and I hoovered the mess on the floor, then switched off and switched on and hoover would not work? Is there a cut off button on Hetty hoovers?


Know cut off switch, its just not getting power ? 2 things its ether at the wall plug or in side the unit. I have never found a fuse in side them , so it may be just a lose wire did you try other plugs in the house . good luck DFD ... Henry Numatic "" Canister Vacuum

How to replace switch on a Hoover WindTunnel twin chamber bagless vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Bypass switch on a henry hoover


... Numatic Henry Bagged Canister Vacuum

Henry Hoover throwing trip switch in house


Sounds more likely to be the switch than the motor, especially if it is the model with the top switch rather than the side "rocker" switch. If you are in the UK, speak to the technical people at ... Numatic Henry Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0648 seconds