Having problems with your iRobot 4296 Robotic Vacuum ?

Irobot and electrical short in charger cable and recall?

Answers :

There have been no recalls nor any widespread reports of electrical issues. If you're having trouble, call support at 1-877-855-8593. They should be able to help you out.
Repair Help & Product Troubleshooting for iRobot 4296 Robotic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Irobot and electrical short in charger cable and recall?

There have been no recalls nor any widespread reports of electrical issues. If you're having trouble, call support at 1-877-855-8593. They should be able to help you out. ... iRobot 4296 Robotic Vacuum

My robot will not charge. Tried multiple resets and new battery from irobot.com (both suggested by Irobot customer service) but got nowhere. The vacuum did work for a short time (until the new partially charged battery ran out). If I bypass the internal charging circuits and charge directly from the charger (with jumpers) the robot seems to work fine. Unfortunatey, there is no mechanism to turn off the charge cycle, so this is not practical.

Replace the battery charger ... iRobot Roomba 4210 Bagless Robotic Vacuum

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when the item is plugged in, I suspect over the years the cable has been twisted and is now shorting.

Hi you need the torque driver no 20 the problem I had was the 2 middle screws luckily a friend of mine had a set of torque allen keys they were long enough to remove them hope this helps if you llived in the North East I would have let you borrrow th ... Polti Vaporetto 2400 Canister Steam Vacuum

Electrical problem I have an electrical problem with the above cleaner. My wife recently extended the power cable by yanking it out of the reeling mechanism too violently. The cleaner stopped there and then. I suspect that the cable has become disconnected inside the cleaner and I would be grateful for information as to how I can mend this problem. Nigel

May have broken the cord, in which case you will probably have to repace the reel cord asm. But you will have to take it apart to find out. Take off the bumper that gores around the cannister, there are 3 or 4 clips that hold the two halfs together ... Sebo Air Belt K2 Bagged Canister Vacuum

I have iRobot Roomba 4210 and I have a problem with charge battery. The battery is new. When I charging a battery in other iRobot Roomba the battery was full charged. When I charging in my iRobot Roomba the battery was empty. My fast charger is OK.

The charging circuit on the main board is fried. This is a common issue. You need some good electronic repair skills, and equipment, to replace the problem components ... iRobot Roomba 4210 Bagless Robotic Vacuum

I have a Z5930 vacuum and i want to trace an electrical fault. I need to disassemble it to get to the electrical connections and it is quite a tricky one to get in side. The machine will run and then cut out after a short time. It will then re-start in about 2-3 minutes and run normally again and so on. I was not able to give you the exact model but it is Ultra Filtration Oxygen line

... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Reinstalling a hampton bay ceiling fan model-HL52QV P 3LC14 and I do not recall how to wire it to the house electric. A black wire and a blue wire are tied together and a white wire are present fromthe fan. Whichone is connected tothe hot wire in my fan electric box inthe ceiling.

The black and blue wire should conncect to the black wire in the electric box and the white wire should connect to the white wire in the box. This assumes the wiring was correctly installed.Jim ... Vacuums

I have a shark vacum cleaner model sv736k 15.6v handheld and the charger cord shorted and corroded the contact. I need a replacement charger ka12d240015033u where / how can i get one?

... Vacuums

I reciently moved and i lost my manual and charger for my vacuum its durabrand model # DS-0108 .. is there any way i can get a replacement charger cable for my vacuum?

I woud go to durabrand's home page most manufactuares have free downloads for lost manuals. There shoud also be a link to their replacement parts section on the same home page. If you don't get any where with that you can try Durabrand.justask,com t ... Vacuums

Miele S5210 vacuum / burning smell & electrical shorting

... Miele S514 Solaris Electro Plus Vacuum

Need charger for the oreck electric broom av-701b

... Oreck Dual Power Electric Floor Sweeper Bagless Upright Vacuum

The wall charger for irobot roomba needs replacing how do i get hold of a new one

Here you are....there are a BAZILLION of them! http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=roomba+wall+charger&_sacat=See-All-Categories ... iRobot 4150 Roomba Vacuum

The electric cable on my Hoover Telios 1800w will not retract when the return contact button is pressed

... Hoover Vacuums

The power head has developed an intermittent, but frequent, electrical short. Is there an easy way to assess where? Or is this a matter for a repair shop.

Greetings,\015\012\015\012A majority of the time when this happens, it's caused by the hose having a short in it. You'll need to first identify what the source of the short it. To do this, turn the power brush on, and then swivel the h ... Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum

The electrical cord has a short can it be cut and repaired

Most of the time yes you could also try to put a new plug on the cord itself that could fix it otherwise i'd take it to a repair shop to have them change the cord for you sometimes it can be real difficult. ... Vacuums

I have a Sebo air belt K1 How do you open the outer casing so as to replace the electric cable.

OK, but be warned... it's not so difficult getting the thing apart, but making a neat job of reassembly has been known to drive grown men to despair. And that's because you have to remove the airbelt. But first things first:1. remov ... Sebo K1 airbelt Bagged Canister Vacuum

Aquavac runs for short time then cuts out blowing the RCD . Have rewired mains cable thinking a broken or loose wire... still same problem. Have also noticed that a lot of sparks etc coming from the motor brushes. Vac approx 10-15yrs old.Aquavac is model 6310B

... Vacuums

Electrolux vacuum cleaner zcx6202, where can i find a retractable cable with electrical contacts as the contacts on my cleaner are badly pitted ,

... Electrolux Vacuums

Electric short Everytime I plug the vaccum into the outlet the outlet starts smoking.

Remove the electrical cord and check the conituity for a short. If one replace the cord. If no short is found the motor is fried although the switch would have to be on when it smokes so I think you have a bad cord ... Sharp Twin Energy EC-7311 Bagged Canister Vacuum

Hi, this is our third Dyson DC-16.. the Trigger was shorting out on the first two.. Now we have the third one for about a year.. on charge when not using it.. don't use it every day, but for quick pickups only.. Just how long should the battery last? I was sent a new charger, didn't help.. it just won't hold the charge even tho two green lights are solid, but one red light does show up..

How are you charging your battery? Every battery has a memory. If you dont let it die the first come times then charge to full the battery will assume 40% is 100%. ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

The PCB controlling the battery charger is overheating and the led dosen't illuminate when charging, could the led be shorted internally causing the problem. The vacuum in question is a Hoover Freejet Cyclone SU144S2 001

The problem was caused by the failure of 7 of the 1.2volt cells in the battery pack, the other problems were symptoms of the battery pack failure. Replaced the thermal cutout a 131 degree C component on the PCB in the docking station for the vacuum w ... Vacuums

Electrical short in handle - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

When you say there's a short in the handle, this can really be one of two things. It can either be the switch, or the cord. Here's a link to repair that I did on how to replace the switch on your Dyson DC07: ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Scooba external charger not working - iRobot 5800 Scooba Vacuum

... iRobot 5800 Scooba Vacuum

Nutone Broan CV556 runs continuously and will not shut off until I unplug it.. I disconnected the low voltage wires and it still runs when I plug it in. Inside the top of the vacuum are 3 electrical devices - one looks like a transformer wire -- one is a rectangular electronic black box. The third is an on off rocker switch. Which piece it likely to be shorted out? It is about 8 years old.

... Broan-NuTone CV556 Cyclonic Bagless Central System Vacuum

I have a Bissell 9400 E pro heat turbo. It's only been used 4 times, today it sounded like something blew. All my house electrics went off...( blew the main trip) I did read some place that the motor can short out and blow the PCB. Hubby and I just took it apart..( what a pain that was) We can't see a thing wrong with the board...( I expected to see something black, or damaged).... because when it blew today there was a weird smell... sort of like garlic. Question... how on this spinning earth

I have the exact same problem! Just occurred today. When I switch it on it fires for a couple of seconds then takes all the electrics in the house out again.\012\012\012Did ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0174 seconds