Having problems with your iRobot Roomba 500 Series Virtual Wall Lighthouse 80201 Robotic Vacuum ?

I have a new irobot 500 i charget it and tried to see if it would work okay onlly to find that it backs up makes a few circles then shuts down beeping 9 times manuel says its a bumper problem is there a way to reset the program?

Answers :

I had a similar problem, mine did not shut down he just kept running in a reverse circle, roomba support suggested i hold him from the back and gently tap the bumper a few times,I think to un-stick one of the sensors. This did not work for me however its worth a try. Best thing is to call i-robot customer support, they were very helpful for me.
Repair Help & Product Troubleshooting for iRobot Roomba 500 Series Virtual Wall Lighthouse 80201 Robotic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a new irobot 500 i charget it and tried to see if it would work okay onlly to find that it backs up makes a few circles then shuts down beeping 9 times manuel says its a bumper problem is there a way to reset the program?

I had a similar problem, mine did not shut down he just kept running in a reverse circle, roomba support suggested i hold him from the back and gently tap the bumper a few times,I think to un-stick one of the sensors. This did not work for me howeve ... iRobot Roomba 500 Series Virtual Wall Lighthouse 80201 Robotic Vacuum

Roomba 400 says "uh oh" and beeps 4 times

... iRobot Roomba Red 4100 Bagless Robotic Vacuum

Our roomba vacuums, then beeps 5 times and shuts off.

Your cliff sensors aren't working properly. Tap the bumper five or six times to knock out anything caught behind it, then blow out under the bumper with some compressed air, really thoroughly. If that doesn't do it, call customer support at 877-855-8 ... iRobot iRoomba 4000 Robotic Vacuum

My iRobot Roomba 560 starts spinning sporadically during the cleaning, and after over 3 minutes it complete stops and beeps 9 times. It is necessary to turn it on until it decides to work properly, and keep waiting for the next time the same failure will occur. I tried to reset it, and I have all the dust removed including from the bumper and sensors.

It's the bumper. Blow it out with compressed air and clean the cliff sensors. If you still get the 9-beep error, call support. ... iRobot Roomba 560 Robotic Vacuum

I just got a dirt devil cyclone quick lite for xmas and its wonderful, but in the last three weeks it shuts off by itself after just 10 minutes of vacuuming. I read the manuel and it says it has an automatic shut off when it over heats but 10 minutes? i mean it takes that long just to do one room and I have two floors the indicator on top is always green so I know its not the motor or service but is this the norm with these or is it just mine?

You have to blow out all dust every week,on all vacuums\015\012You really need an air compressor\015\012\015\012Remove the beater brush and clean the hair off end bearings\015\012Your motor is over loaded and circuit breaker i ... Vacuums

Power nozzle on E-series won't start when cold unless the red 'reset' button is pressed multiple times while also holding the trigger to 'warm it up'...this is w/the power nozzle off the floor - no restriction on it turning. Once it's been running and then turned off the button must be pressed w/the trigger to get it to run - again w/the nozzle off the floor. It also seems to shut off too easily while vacuuming. I replaced the motor,which didn't fix it. Is the reset switch next on my list? T

... Rainbow E series Canister Wet/Dry Vacuum

Motor My vacuum cut out as I was using it. After some experimenting I found that the circuit reset had gone off. When I tried a second time while near the motor , there was a flash and again the motor shut off. At this time I am guessing that the motor is faulty. The central vacuuming is approximately 12 years old.

If it tripped the reset again, I would probably agree with you. Check out centralvacuum.com for another motor. They aren't the cheapest, but they have excellent support. Good Luck!! ... Easy Flo EF1400 Central System Vacuum

My 400 series Discovery Roomba will no longer charge. It shows a green "charged" light, but when I hit clean, all lights/vacuum, etc just go out and it stops. Irobot says that the entire unit needs to be replaced, but it has to have something to do with the charging mechanism. Any Ideas? I've tried the system reset, and removing/replacing the battery. No effect. The robot doesn't give me the "uh-oh" beeps to be charged. It just stops and goes dead.

... Roomba Robotic Floor Bagless Vacuum

Spins around in a circle and then beeps 9 times and shuts off

Yes, this is known issue and if your bumper moves freely, you might be \015\012facing a sensor fault caused by poor quality of components.Here is a\015\012 guide to fix ithttp://www.schneordesign.com/Avi/irobot/roomba_mod2.htmHave\ ... iRobot Roomba 550 Vacuum

I have a samsung stove FTQ386LWX serial Number 12787DDQ800697X and the broil was left on for a long time and then we shut it off and there is an error code saying temperature .150 not sure what is wrong with it. Can you please advise

... Samsung Vacuums

I have a cannister vacume, Fuller Brush red model # FB-DCC when I turn it on it will shut itself off in about 30 seconds this will happen several times then it will not turn on. I do not have the owners manuel

First, the word is "VACUUM." Second, it's obvoius that your motor is overheating. When's the last time you CLEANED THE FILTERS, per the operating instructions? ... Fuller Brush Vacuums

My lux 7000 has a new bag but when i start to use it with the power unit or without the unit shut's it self off i can reset the lites or the motor if you will by clicking the on off switch 4or 5 times and i'm ready to go again untill you start to work and off it goes you can repeat the switch thing as long as u want, it just won't let u vacuum ,it turn's it self off .I blew it all out but found nothing in it. if u don't try to vacuum it will run as long as u want to listen to it. Can you

Have you replace the afterfilter? It may also cause this if rather dirty. It's located under the tool caddy/air diffuser on the back half of the machine.\015\012Try this: Disconnect hose, turn on vacuum. Does it continue running? If so, pl ... Electrolux Lux 7000 Bagged Canister Vacuum

Burned smell hi, I have used my hoover 4 times and is starting to smell as something burned, I checked the troobleshouting part of the owner manual and it says that check the belt, I already did that and everything is ok I used the hoover again and still smelling bad and start to work very slow I better shut off it.. what could I do??

If the motor slowed down this would indicate a bad motor. not cost effective on this model to replace unless under warranty. it is not uncommon these days to see a motor go bad every now and then.\015\012\015\012What are the first 4 digit ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

My roomba stopped working. I just turns in jerky circles then stops and beeps 9 times and shuts down. I cleaned it pretty well and that didn't change a thing.Any ideas would be welcome.

HeyLook at this pageGood luckAvi ... iRobot Roomba 560 Robotic Vacuum

My i-robot spins first to the right, moves back a little, then spins again. after about a minute it stops the red light flashes it says oh oh and beeps nine times. how can i fix this?

Hey\015\012Please look for other same problem posted here \015\012;-)\015\012You are probably \015\012facing a bumper sensor issue.Try to clean the bumper first and if this \015\012goes on, either call iRob ... iRobot Roomba 530 Robotic Vacuum

UPM Model ET170 Electronic Timer Programming: A. Is it required to associate one program number with each day of the week? B. Can two programs run during the same day? C. Can each week day run a different program number? D. What is the shortest ON time one must program for the RANDOM function to provide two ON-OFF cycles? E. How do I end the programming mode and start the timing sequence. The instructions with the timer are not clear to me. Thanks for your help.

A. It is required to program each day of the week.B. No. Either it is programmed to be on or off.C. Yes. Each day can run a different program.D.Short random is for 1-2 hours. Long Random is 2-3 hours.E. Once you are done progr ... Vacuums

I have 2 #560 roombas. They both beep 9 times. I have replaced batteries and also cleaned the bumpers several times. Why does it beep 9 times?

Try this linkhttp://uksupport.irobot.com/app/answers/detail/a_id/880/?cc=uk ... iRobot Roomba 560 Robotic Vacuum

Changed the motor carbon brushes on my Beam central vacuum cleaner equiped with an IntelliWatch system. This system includes the Alutron DB100 module. This Alutron module needs to be reset so that the vacuum cleaner can operate properly. I believe that this module keeps log of running time and disables operation after a predetermined time. Can you help me with providing a reset procedure that will reset this module. Thanks

... Sunbeam Vacuums

My electrolux oxygen vacuum cleaner shut off and will not turn back on. It's less than a year old, but I bought it off Craig's list--they were the orginal owner and they said they bought it in May of 2008. I've only used it a few times and it worked fine except for the last time when it suddenly just shut off. I thought maybe it had come unplugged and I didn't really worry about it because I was finished vacuuming. But, I went to use it tonight and it would not turn on at all--no lights, nothing

No..Electrolux is really great about warranty service. They will help you even though you are not the original owner. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

It shut off ,the water got real foamy and it shut off . will it reset. Do I need to reset it.

It should reset, try not using a sol that has a foaming agent in it. ... Vacuums

I purchased an Emerson smartset alarm clock I had to unplug and replug Unfortunately, I can't get the time reset properly It keeps resetting iteself........to the worng time I can't find what i did with the original instructions Where can I get a duplicate manual or instructions to correct?

Scroll through this list the duel alarm with smart set will probably be simiular. Good luck. http://portablem ... Emerson Vacuums

How d i reset the time on the pyrex professional four event timer..It is very old and cannot find the instructions for time reset. thanks

Just hold down the Clear button for more than 10 seconds. ... Vacuums

I am looking for a manuel for a baby lock BL4-428. I purchased one some time ago at my mother-in-law's church's fall auction. One of the church member's mother had passed away and she donated the serger but she didn't know where the manuel was at the time of the auction so I am trying to find one.

Tried to find a fee download but was unable.\015\012\015\012You can do a purchase at this URL:\015\012\015\012http://www.allbrands.com/products/abp04106.html?ppc=cjpdt ... Vacuums

Our Whirlpool microwave is 5 mo. old - it is W10182518A --- we tried to change the time because of daylight savings time going off and the clock will not hold the new time - PRESS comes up - and then different time show up - I have the manual and am doing just what it says.

... Vacuums

My atomic clock has not worked properly since we received it. The projection time was off from the real time and now the clock face is blank except for 2 lines. We followed the directions to press snooze to get the projection time right. That didn't work and I have also reset the clock but there is no display.

I have had several atomic watches and they are difficult.\015\012What make & model do you have?\015\012What is the website, if I can find instructions, I may see them in a different way.\015\012If the time is off, it may be savings ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0741 seconds