Having problems with your iRobot Roomba Discovery SE Bagless Robotic Vacuum ?

I robot won't go forward

\015 My vacuum keeps backing up as though it is bumping into an object even though nothing is there for it to bump into. Suggestions?\015

Answers :

HAVE YOU TRIED OPENING UP THE ROOMBA AND CLEANING THE SENSORS?
I had this problem and cured it by blowing hard down into the cliff sensors to dislodge dust which had managed to get up inside.
Repair Help & Product Troubleshooting for iRobot Roomba Discovery SE Bagless Robotic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The ball on my dc25 wont go forward


Hi there,I'm sorry to hear you're having difficulties with your DC25 Animal. If the Ball seems harder than usual to rotate, this may be because the filter inside the Ball is out of position. Try removing and refitting the filter, making sure ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 wont roll forward


... Dyson DC25 Animal Bagless Upright Vacuum

I robot won't go forward


HAVE YOU TRIED OPENING UP THE ROOMBA AND CLEANING THE SENSORS? ... iRobot Roomba Discovery SE Bagless Robotic Vacuum

My husqvarna 2000 will only sew straight backwards - it wont' sew forwards - what can I do


... Vacuums

Roomba 4212 goes backwards a short distance and forwards a short distance not working properly. wont move further. does it have a reset button?


... Vacuums

I robot won't go forward


Apache Server at www.youtube.com Port 80 ... iRobot Roomba Discovery SE Bagless Robotic Vacuum

I robot rumba- does not go forward, keeps backing up and turning


Sounds like one of the cliff sensors has gone bad. I think your options are to send it in for repair or buy a replacement sensor and swap it in. \012\012Good luck, \012 immorion\012check out robotreviews.com for detailed walk throu ... iRobot Roomba 560 Robotic Vacuum

Irobot wont pick up garbage - iRobot Roomba 530 Robotic Vacuum


... iRobot Roomba 530 Robotic Vacuum

No forward motiong - iRobot Roomba 4210 Bagless Robotic Vacuum


Take the brushes out and blow out all of the dust inside the roomba with a shop vac. I found this solution on another site and tried it when my roomba forgot how to move forward. It works! If you can, do it outside, a lot of dust came out and it wou ... iRobot Roomba 4210 Bagless Robotic Vacuum

My roomba wont go forward just back then stops


Try popping out front wheel and clean axle ... Roomba Robotic Floor Bagless Vacuum

I have a mid wm8650 and its stuck on the green robot screen


... Vacuums

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

My new vaccum wont pick up cat hair


I would return this vacuum while it is still under warranty. ... Vacuums

My Roomba will not move forward. It will try and spin itself and then try to move forward but then spin itself again until it stops and beeps. I tried cleaning the whole unit but it still is unable move forward. Help please!


Heyis it 5xx Roomba ? is it 9 beep that it sounds ?Please look for other same problem posted here ;-)You are probably facing a bumper sensor issue.Try to clean the bumper first and if this goes ... iRobot Roomba 530 Robotic Vacuum

Self propelled vac: goes great on hard floor or hard slick carpet. Goes backwards fine but will not pull itself forward very well. Requires some effor to push it forward. I have adjusted the cable so the lever on the motor goes as far forward as possible. Suggestions? Model U6446-900


Dear Nasherrill,\015\012\015\012I've found a friend! I thought I was the only person in the world who owned the Hoover Model U6446-900! This model does not appear on the http ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Wont make calls wont receive calls wont send or receive sms


Hi. Can you tell me what brand and make is the mobile phone? ... Vacuums

THE BRUSH WONT SPIN AND THE SOLUTION WONT COME OUT


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

DC07 brush wont spin on bottom, took all apart and wont work


Hithe belt is broken or stretched, replace it ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Green light wont go on and mop wont heat up


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My Bissell Proheat 12 amp is hard to push forward(whether on or off). There is a loud clicking noise when pushing forward and it ''jumps'' up on every loud click. It's OK when pulling backwards, sprays and vacuums up water. Belt appears OK. Thanks


I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

The light wont turn on and mop wont get hot is the fuse bad


You have to consider several things. Fuse is the first thing to check, but you need to check also if there are loose wires and check also if the plate is still working. These are the things that you need to check.If all else fails after r ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Hi, I have a Sebo X4 which is almost 3 years old. I haven't had any problems with it until the last couple of days when I notice a slight screeching noise when in upright position, coming from the roller mechanism area. If I slightly push the sebo forwards it gets worse, if I tip it back it stops. If I take the roller out and switch on, there is no noise. I have always been careful not to tip the machine forwards when using the hose, but I recently lent it to a friend whose hoover had broken do


I dismantled the top part of the machine from the bottom and there stuck right down in the bowels of the tubes was a piece of card, a dress label! somehow it was only making a noise when the machine was in an upright position. It took a bit of stretc ... Sebo X4 Bagged Upright Vacuum

Spin brushes wont spin and the switch wont turn machine off. I have to unplug it. 


For the spin brushes it is most likely the motor is fried if you smell something burning it could be jammed or the wires have be shaken off the motor terminals. for it not turning off you need a new switch. ... Hoover F7431-900 SteamVac Vacuum

Scuncii Steamer wont work wont blow steam anymore


It is probably clogged with rust or limescale - can happen with steam cleaners. Sadly there's no way around this but to try a limescale remover in distilled water such as Calgon limescale remover. Fill the kettle as normal and give it time to boil up ... Scunci 52067 Handheld Steam Vacuum

I have a bissell pro heat and it wont dispense water. the little red thing wont spin and it looks like the belt doesn't move. within a few minutes you smell it getting hot.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0494 seconds