Having problems with your Kenmore 22313 Bagged Canister Vacuum ?

Rollers not spining on my kenmore canister vac.

\015 The belt burned off replaced it but now the rollers do not turn\015

Answers :

Particles of the failed belt may be  trapped in the bearings which, if I remember right, aren't very well protected.\015\012
\015\012I'd remove the rollers, slide the bearings off (if they do slide off) and blow them out with a compressor or saturate them with WD-40 and turn manually until they are free again.
Repair Help & Product Troubleshooting for Kenmore 22313 Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rollers not spining on my kenmore canister vac.


Particles of the failed belt may be  trapped in the bearings which, if I remember right, aren't very well protected.\015\012\015\012I'd remove the rollers, slide the bearings off (if they do slide off) and blow them out with a compressor o ... Kenmore 22313 Bagged Canister Vacuum

Kenmore Canister Vac, Progressive, 25512 255513 model. Brush won't turn. One end of the brush roller, end closest to belt, is off center which is keeping it from turning freely. The end cap is like a square. Other ends turns fine. Do these end caps come off? If so how? Can't get it to budge. This is exactly what is keep brush roller from turning.


Take a flat head screw driver and pry the end cap off. It will come off. You might have some string or hair around it causing it to not turn. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

No power to head of Kenmore Progressive canister vac


... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Kenmore canister vacuum model 116-25512506. It has a 2 stage switch on the handle, the vacuum motor will not work, the carpet beater attachment does work, the vacuum motor will not cut on at all with either stage, 1st stage is vac only, 2nd is vac a carpet attachment. Carpet attachment will work, vac does not.


Try to find the reset button. It should be somwhere near the bottom area. It looks like a red dot that you can push inward. If you can press and hold the reset button, it will restart your suction and solve your problem. ... Vacuums

No power to head of Kenmore Progressive canister vac


... Vacuums

Kenmore progressive canister vac


... Kenmore 25512/ 25513 Progressive Canister Vacuum

No power to head of Kenmore Progressive canister vac


The extension wands are defective and have trouble with their plug connectors on each end. The power head has a reset button on top right but no lights mean no power which means the wand isn't connecting the power to anything. Sears has ... Kenmore 22812 Bagged Canister Vacuum

I have a Kenmore Canister Vac. I need to replace


Try forcing a flathead screwdriver between the flange (tab) on the hose collar and the tab on the swivel assembly itself, taking care not to gouge the wires. Saw one solution where they used 2 screwdrivers simultaneously; couldn't do that, but did lo ... Kenmore Vacuums

Kenmore canister model 116.25513506 wont turn on. when handle switch is turned to floor. vac motor does not turn on. When switch is turned to carpet, floor nozzle works but vac motor does not. I checked fuse, all o.k. checked continuity for plug, o.k. removed wires for bag full switch...motor wont run. I wired motor directly power cord...motor runs. Thinking it must be the circuit board, how do I bypass it or test it?


... Vacuums

Power head for Kenmore Canister Vac


Another potential problem for the increase in difficulty in turning the beater bar (drum) could stem from extremely dirty bearings, located at each end of the beater bar. I've seen hair knotted up to the point it chokes the bar and significantly redu ... Kenmore Whispertone 29512 Vacuum

Kenmore 25614/25615 Progressive bagged canister vac won't start


Sounds like there was a loose connection or loose wire that came in contact with another wire. check your cord for small burn holes, also could have shorted out in the hose or the wand. If you are comfortable to disassemble the vacuum i can walk you ... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum

Owners manual for kenmore canister vac 11629219800


... Vacuums

Assemble Swivel Assembly onto Kenmore Canister vac


Got this post off this web site...I just replaced my swivel and it worked:\015\012http://www.managemyhome.com/mmh/answers/Answers.action# ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Bought a Kenmore Progressive canister vacuum at a garage sale that looked in better than average condition, filters clean, new bag, all accessories intact, some debris in roller brush. problem is no suction when turned on. There does not appear to be any obstruction in hose. did not have manual


Hello,Carnister vacuum cleaners are all built with the same principle in mind. A motor \015\012generates power which powers a vacuum which, in turn, creates suction to\015\012 lift debris. The most common areas of suction loss are within ... Kenmore 25512/ 25513 Progressive Canister Vacuum

My vacuum is making a whistling sound and when I turn it off it momentarily gets louder and makes a honking sound. The vacuum is a Kenmore canister vac model # 116.27814. It has a new bag and filters.


... Kenmore 27814 Bagged Canister Vacuum

DO YOU HAVE A WIRING SCHEMATIC FOR A KENMORE CANISTER VAC MODEL# 116 22600200C? I NEED TO TRACE BACK A PROBLEM, THANKS


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore canister vac model 116. 2641381


Small sparks coming from the brushes is normal. That would be a thin line of sparking near the commutator/brush interaction point. Large or irregular sparks are different. The commutator (segmented copper item) should be fairly bright copper color ... Kenmore 22812 Bagged Canister Vacuum

I just got a Kenmore canister vac model 27514 and there is no suctionin the hose.


Is the bag full? if not it is clogged up ... Vacuums

How do I put the filter in kenmore progessive canister vac. Is the white or black facing me


... Kenmore 22612 Bagged Canister Vacuum

Kenmore canister vac 25614


Have you checked and made sure that the hose is COMPLETELY clear and the bag is not full? ... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum

My dyson roller stopped spinning - Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum


I had the same problem hit the reset button never heard a click but it started spinning again! ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

How do I get the cover off my Kenmore PowerMate canister vacuum? The roller is stuck.


Remove the top that covers your light bulb, remove the two screws, unscrew light bulb, flip unit over and find the two clips on the right and left side, gently press each clip and the hood comes off ... Vacuums

Have a kenmore canister vacuum cleaner which the power-mate parts don't work. I had loaned the vac out it came back with part of the hose smashed. I don't know if that is the problem.


The hose conducts power to the "power Mate" There are wires running end to end through the hose and handle. If your hose is grey with hard plastic cuffs at both ends, it is repairable, but you will need to locate the Smashed parts. If yo ... Vacuums

What belt do i need for a kenmore canister vac 116023513304


I'm not familiar with the model number that you posted. But if the picture you posted is the model you have then this is the belt you needhttp://vacbelts ... Kenmore 22812 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0717 seconds