Having problems with your Kenmore 22812 Bagged Canister Vacuum ?

Need to know if a replacement part can be purchased and where

\015 The plastic piece in which the power heads pipe/hose is connected to the top of the powerhead has split into on my Kenmore Progressive canister vacuum. Therefore the powerheads pipe/hose keeps coming unattached from the head. Is there a way to replace this part? This is for a Kenmore Progressive Canister vacuum model 116.22813204.\015\012\015\012If a part is available where and how do I go about getting one.\015

Answers :

Kenmore canisters are privately labeled Panasonic canisters and sometimes panasonic parts will fit them. Any reputable independent dealer should be able to tell you if the part you're looking for is intercharngable with a Panasonic, but he/she will probably need to actually see the unit.
\015\012
\015\012Your other option is to take it to the Sears service dept. They are the only ones who have access to the schematics and "Kenmore" parts. It'll probably be more expensive through them though.
Repair Help & Product Troubleshooting for Kenmore 22812 Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to know if a replacement part can be purchased and where


IT CAN BE FIXED BUT YOU NEED TO KNOW THE ROPES \015\012I HAVE THE KNOWHOW AND THE PARTS \015\012PRICE IS 40$ + YOU PAY ONE WAY SHIPPING \015\012RETURN IN 1 WEEK \015\012EMAIL ... Kenmore 22812 Bagged Canister Vacuum

I have a Kenmore Progressive model 116.22812204 purchased 2003. The swivel (part nuumber 8195133) that attaches the extension wand to the power mate attachment snapped, so I can't keep the parts connected. I can order a replacement part on-line, but I don't know how to replace it - is it difficult to take apart the power-mate and replace this part? Do you have instructions on how to do it? Thanks!


... Kenmore Vacuums

Need parts Anyone know where I may find replacement parts for this cleaner? I also need a manual. Thanks


Go to this site they have the schematic and replacement parts.\015\012http://www.hescoinc.com/vacuum_cleaner_parts/bissell.html ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

My mother purchased a replacement hose assembly for a Bissell ProHeat 2X and the part was shipped without any instructions... While I am pretty handy, my issue is with the supply tube, and I cant figure out how to accomplish the replacement, and as its not MY vacuum, Im hesitant to start taking things apart.I just need instructions to replace the entire hose assembly.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I need to purchase new blades for our 52" Jericho IV ceiling fan, Model 166315. I went to home depot in Harrisville, UT and they said that we would have to contact you and they didn't have ANY replacement fan blades in stock. HOW COULD THAT BE WHEN THEY HAVE HAMPTON BAY FANS ALL OVER THEIR LIGHTING SECTION? What kind of a business are you running when one can't get replacement parts? Our fan is making noise and I want to replace the blades. How hard can that be? By-the- way; I hope you no


... Vacuums

I need to know how to replace a agitator brush for a Hoover Fusion model U5180 900. I was given the vacuum, but without the manuals, so I have no instruction on how to replace the brush. I have already purchased the new brush. Thank you for your help


Please use the following link.\015\012http://www.hoover.com/pdfs/manuals/U5180900.pdf ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

How do I replace the drive belt on a kirby G4? Actually the belt is already replaced I just need to know how to reattach that front part back onto the main vacuum. HELP


Greetings from GoVacuum,\015\012\015\012Here's a video we shot showing you in detail how to install a belt properly, and how to reattach the head properly. I hope this helps you;\015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede


... Vacuums

Need to purchase an on/off switch for my infinity nv31 but am having trouble finding one....the local vacuum store will not sell it to me unless I pay the 80 dollar fee to diagnose what I already know...I have already removed the part, but cannot find a part number nor supplier. I live in Pensacola. thanks


Is this some sort of special switch? Are you concerned with cosmetics? \015\012\015\012If not, Just find a spst switch, drill a hole next to the one where the old switch was and replace. Of course, make sure there is room for your 'new' ... Euro-Pro NV31 Infinity Vacuum

I have a Minamiya Seitosho1940/1950 Teapot and need to replace the heat element (coil part inside the teapot) who can I contact to purchase part?


You can search on line with your model number for parts or try the local appliance shops ... Vacuums

We have a Kenmore Grab-N-Go Upright Vacuum with a Hepa filter. We lost the yellow filter canister that goes in the top of the vacuum and need to replace it and the filter that goes in it. Is there somewhere we can purchase a replacement part?


... Kenmore 34722 Grab-N-Go Upright Vacuum

I need to replace upper thread holder of my bernina activa 145 S. I also need to know were I can purchase one at. thanks in advance


... Vacuums

I need to replace a cam shaft for a Salton Cookie Press model # ckm25. Please notify me as to where this part can be purchased.


I'm having the same issue. Lost the shaft to this cookie press and see no way to order a replacement ... Vacuums

I have a Hoover Vacuum Cleaner, Runabout Supreme, on which the belt has broken. I purchased a new belt, part number 38528-040. I need some instructions on how to install the replacement belt? Thank you. JBS


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=728341\015\012Generic problem for all Vacuums\015\012I have a Hoover Vacuum\015\012Posted by Jimbob48 o ... Hoover Elite U5061-900 Bagged Upright Vacuum

I purchased the SHARK cordless hand vacuum,18 volt SV779Z 14 from Walmart and mailed you its product registration on Nov.3,2010. As I was vacuuming my kitchen countertop ,there was a big bang and it stopped all suction. Walmart told me to get in touch with you since they did not have any more to exchange. I have the sales ticket and did register the product as mentioned before. I need to know what I can do to get a replacement since it was under guarantee. Thank you! Robert Schwarzenberger


... Euro-Pro Vacuums

I have a Moulinex Juicer model 753. I need a replacement grater and filter unit Ref.No. 810024, this is the centrifugal disk. Could you please let me know if this part is available and cost of the unit + P&P to New Zealand? Regards Glynis Scott


... Vacuums

Sunbeam water dispenser YLR2524H2 - the hot water lever broke and I need to know if I can get a replacement part and can I install the new one myself?


... Vacuums

I am trying to find the powermate parts to replace the roller brush on this vac I have trouble finding websites that sell these. I need to know the item numbers so that I can order the correct items to fit this model.


Brought the powermate part to local Sears part store and they ordered the items we needed \015\012 thanks for trying to help \015\012\015\012GFreckles913/Glenna Rodell ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

A family member recently gave me their Kenmore Vacuum Cleaner (model 35821) and I did not notice that the power cord was missing at first. I tried to look closely at the manual online to see if this was something I would be able to purchase or if the vacuum was no longer any good. Do you happen to know if there is a replacement part for the actual power cord for this item?


Any power cord 17 gauge or lower will work ... Vacuums

I need the replacement part that inserts into the working end that had the brush attachment. Can this be purchased anywhere?


Click on the link below to view a complete Shaper Image SI570 on ebay:\015\012 ... Sharper Image SI570 Steam Wizard Handheld Wet/Dry Vacuum

I have a Janome Model 556, purchased in 1968 in Zimbabwe. I need to know how to replace the wires of the foot pedal. There were 4 wires used to go into the small plug attached to the machine, however the wall plug only had 3 wires.


... Vacuums

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Need to replace brush bar, where can I purchase?


Any vacum shop that sells a vaccums or sears should carry the brush bar, unless you have certain kinds that are VERY expensive then you have to go through the dealer themselves ... Vacuums

I need to replace the part of the wand that


Try espares .co/uk ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I need a service manual for an Electrolux C104A vaccuum. I know the part I need but don't have a part number. The part description is the hose connector at the beater attachment.


If you talking about the part that swivels it is called the elbow and the part number is 46861. ... Electrolux Guardian Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0862 seconds