Having problems with your Kenmore 23313 Whispertone Bagged Canister Vacuum ?

Kenmore Whispertone How do I change the belt?


Answers :

The cover over the light, push in on the sides to release the tabs, then remove 2 screws. Using a screw driver, put it in the slot, one on each side, from the bottom, pry up to release the tabs, cover will come off and you can get to the belt and brush roll.
Repair Help & Product Troubleshooting for Kenmore 23313 Whispertone Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore Whispertone How do I change the belt?


The cover over the light, push in on the sides to release the tabs, then remove 2 screws. Using a screw driver, put it in the slot, one on each side, from the bottom, pry up to release the tabs, cover will come off and you can get to the belt and br ... Kenmore 23313 Whispertone Bagged Canister Vacuum

Belt for kenmore whispertone 116.26512690 - Kenmore 23313 Whispertone Bagged Canister Vacuum


... Kenmore 23313 Whispertone Bagged Canister Vacuum

How to change the belt for kenmore heavy duty plus extra wide sweep model no. is 1163966180 looking for manual how to change the belt


... Vacuums

I cannot get the Kenmore power-mate open to change the belt? How does it come apart?


... Kenmore Vacuums

I can't seem to get the belt cover off of my Kenmore Progressive 400. There are two buttons that say above "belt and bulb change" but the buttons do not move. Do you know how I can remove so I can put a new belt on? Thank you!


You have to take off the top of the power nozzel that has the light lense. There are two pressure locks,one on each side. Use a screw driver to release. You will see the screws.Take the two screws out and on some models, there are two pressure locks ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

How do i change my Kenmore upright vacuum belt?


... Kenmore 33721 Upright Vacuum

I have a kenmore vacuum cleaner that I bought a new belt for butcannot get the bottom off to change the belt. Model # 116 53312305


... Kenmore Vacuums

Change the belt in my kenmore power-mate 120 amps...how to open it to get to where the belt is???


HELLO, JUST REPLACED THE BELT ON OUR'S. FIRST TAKE LITE LENSE OFF THERE WILL BE 2 SCREWS, REMOVE. THEN FLIP OVER POWER MITEON EACH SIDE PRY WITH 2 SCREW DRIVERS WHERE THE ARROWS ARE TO SEPERATE & THERE IT IS THE BELT. MIKE ... Kenmore 23313 Whispertone Bagged Canister Vacuum

I've got a Kenmore canister vacuum, Progressive 236123, and there's a burning smell from the belt side of the head--smells a lot like hot rubber. I've cleaned the agitator and changed the belt, but I still get the smell. It's stronger when I'm using "carpet" mode than when I'm using "bare floor" mode. Any ideas what the problem is?


... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

My question earlier today referred to a Kenmore Progressive upright vacuum. Your answer suggested that I change a belt, if the reset button did not work. Does a direct drive really have a belt? Regards, Jim Buckley


Direct drive does not have a belt. It is a shaft with gears. What is wrong with your vaccum? Maby i can help. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Belt I have a Kenmore canister vacuum and I need help changing the belt


You probably need a phillips screwdriver to Remove the screws on the bottom of the vacuum and pull the brush bar out _ the belt is wrapped around one end of that and anchored to the vacuum - put new belt on and replace cover on bottom by replacing th ... Kenmore Vacuums

How do you change the belt on a Kenmore Model 31164 vacuum


... Vacuums

Remove powerhead case on Kenmore #116 53500300C to change belt


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Chang the belt in my kenmore power mate power head


... Kenmore 25512/ 25513 Progressive Canister Vacuum

How to change the vacuum belt on a kenmore heavy duty plus model number 203966180


... Kenmore Vacuums

How to change belt Kenmore Progressive 300?


... Oreck XL2200 Bagged Upright Vacuum

How to change the belt on a kenmore cannist


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Need to check belt on a Kenmore WhisperTone powermate vacuum


There are two screws. Pry off the light bar on top by pushing against the sides, and you will see them inside just behind the light bulb. ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

KENMORE 23313 WHISPERTONE BROKEN BELT


Hi There,\015\012\015\012Here's a link to a repair that I've already posted on Fixya on how to replace the belt on your Kenmore Whispertone. This should help you out greatly. If it doesn't and you still have questions, please feel fre ... Kenmore 23313 Whispertone Bagged Canister Vacuum

Kenmore elegance: how do I open it up to change the belt?


A picture is worth a thousand words, so the diagrams in this manual should be helpful:..35622 Owner Manual ... Vacuums

Dirt is coming out the bottom of my Kenmore Progressive Upright Vacuum. My husband found a large dust bunny in the drive belt and removed it. He also changed the bag. Why is dirt coming out the bottom? Thanks.


Its still clogged, you gotta dig deeper ... Vacuums

HOW DO YOU CHANGE BELT CANT SEEM TO REMOVE BOTTOM TO GET TO IT KENMORE WISPERTONE 116


The top cover to the light lense pops off at the ends. When you get that cover off then you will see 2 screws that are by the swivel neck. Take those out and then the whole body top cover comes off. That will get you into the roller brush and belt ... Kenmore 23313 Whispertone Bagged Canister Vacuum

Trying to change belt in kenmore 3116890 upright vacuum cleaner model116. Can't open vac


... Kenmore Vacuums

How do i change the belt on kenmore upright vacuum


... Kenmore 35622 Upright Vacuum

I have 2 Kenmore whispertone #116.20512 vac's that have been working perfectly. Within 2 mos of each other both refused to start after being used the day before. No clogs or belt probs, etc. I have read the manual, checked filters but there is no other troublshooting advice.


... Kenmore 25914 / 25915 Progressive Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1328 seconds