Having problems with your Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum ?

Kenmore whispertone 8900 won t turn on

\015 Need manual to know how to take apart to check motor...I don t want tobreak the covers...model 116-3289090c\015

Answers :

Repair Help & Product Troubleshooting for Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore Whispertone Model 116 won't turn off, how to fix?


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Kenmore whispertone 8900 won t turn on


... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

Kenmore 21875 One day it's working fine. Next day, it won't turn on. When I attach the hose to another vacuum cleaner, it runs. Is there a reset button on the canister? Could it be the receptacle is bad? My Kenmore Progressive won't turn on today either -but was fine last week. I cleaned the filters checked for blocked air, tried a different outlet and no luck. I'll check the pins on the connections and see if one of them is not matching up or appears worn.


Give the prongs a wiggle and see if there is any play in them.Might just be a plug end. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore Canister Vac, Progressive, 25512 255513 model. Brush won't turn. One end of the brush roller, end closest to belt, is off center which is keeping it from turning freely. The end cap is like a square. Other ends turns fine. Do these end caps come off? If so how? Can't get it to budge. This is exactly what is keep brush roller from turning.


Take a flat head screw driver and pry the end cap off. It will come off. You might have some string or hair around it causing it to not turn. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Roller brush on Kenmore model: 116.31199100 won't turn


Refer to Larryclare1's solution at http://www.fixya.com/support/t1095798-kenmore_model_116_powermate_jr_stopped It worked great for me. Replace the belt, which you can get at Sears Parts store/online and clean out the hair as per Larryclare's in ... Kenmore Vacuums

My Kenmore canister model (116) 26212601 works in hard-surface mode (basic suction), but the brush won't spin for carpets, and when I try to turn it on, it makes a whiny sound and then turns off as it does when I need to press the overload button. I looked inside a bit, and the belt isn't broken--it seems fine. So not sure what the problem is. Thanks for any help.


... Kenmore 27815 Bagged Canister Vacuum

My Kenmore Progressive Vacuum canister won't turn off.


The two run on there separate switches. so notrhing is wrong with it ... Kenmore Vacuums

Kenmore progressive bagless brush roller won't turn


Sounds like the brush belt is worn or torn ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore vacuum cleaner won't turn on


... Kenmore 25512/ 25513 Progressive Canister Vacuum

My Kenmore progressive 25513 506 Won't turn off


You need to buy a new pc board which is in side the canister between the motor and the power cord. first remove the lid. just pull it back real quick the it will come off. you might think you broke it but if done right it won't. now lift up but don't ... Kenmore 25512/ 25513 Progressive Canister Vacuum

The brush on my kenmore progressive direct drive intel clean won't turn


... Kenmore Vacuums

Kenmore 23513 canister vacuum won't turn off


Is there two switches for the unit, one for the handle (pick up unit) and brush assembly, and one for the vacuum motor? If so it seems that the handle unit is o.k. but the problem may be the switch to the vacuum motor. I would suggest testing the va ... Kenmore 23513 Progressive Bagged Canister Vacuum

Brush won't turn on my Kenmore 216.37035700 vacuum


Here you go http://www.managemylife.com/mmh/owner_manuals/11796/KENMORE-Vacuum-Upright-L0712557?brand_name_search=Kenmore ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

The beater of my kenmore vacuum won't turn on - the primary light goes on but none of the sensor lights go on.


Kenmore vacs generally have three male contacts at the machine end.Internally when the hoses swivels these contacts run on three brass rings which can also get dirty due to proximity to dirt. They can get dirty or dirt can fall into the corresponding ... Kenmore 22812 Bagged Canister Vacuum

MY MIELE SOLARIS WON'T TURN ON - Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum


You might have a back main switch. Sometimes they won't lock in to be turned on. A dealer can get you a new part. ... Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum

Kenmore canister model numer 26212690 12.0 amps with powermate. How do you remove the bottom part to check the belt. The blade won't turn and the switich is on rug not wood floor. There are two arrows that say to seperate use screwdriver at arrow. Have seperated at the arrows but the back will not come apart.


Hi There,\015\012\015\012There are actually two screws that need to be removed before you can separate the bottom from the top housing. The screws are actually located either underneath of the headlight cover, or on the bottom of the ma ... Kenmore Vacuums

Hello, I have a Kenmore Progressive Canister Vacuum 116.20912006. It won't turn on. On the hose assembly, the end where the hose swivel is, there are 4 metal pins that plug into the canister. One of the pins looks like it broke off. There are only three pins remaining. I assume there should be four pins as there are four holes. Is this the problem and is it fixable? The vacuum is from 2002 so I am not sure a replacement part is even available and at what price. Thank you. Susan susan.eng@


Hi Susan, if the pin has broken off you can do one of two things, first, would be to find a local vacuum repair shop and take it there for them to look at. they may be able to look at the hose and fix it for you pretty cheaply. what ... Kenmore Progressive 20912 Bagged Canister Vacuum

My Kenmore vacumn won't turn on . worked fine one minute then stopped. The light works on the handle but no vacumn


You probably have a sensor that needs attention and is clogged up so unclog and see if that takes care of it ... Kenmore Vacuums

Kenmore progressive upright, beltless vacuum, the roller w/ brushes won't turn, no belt to chane.


They usually have belts for that kind of thing at walmart! ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Our kenmore 25513 won't turn on. Is there a reset button?


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Won't **** I have a kenmore progressive upright bag vacume. when I turn it on it sounds find, then all the sudden it sounds like it has sucked something into it blocking the suction. Can you help?


There is what they call an intake.disconnect the hose and see if it make the same sound.if not then its clogged up in the hose.if it still makes the same sound with the hose off then here is what you have to do.on the top of the base there are 2 slid ... Kenmore 35912 / 35913 Progressive Upright Vacuum

I have a kenmore upright progressive beltless vacuum and the belt won't turn????


Remove the belt from your beltless vacuum and you should be golden! ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

MY KENMORE ,MAGIC BLUE VACUUME CLEANER WON'T TURN ON & DON'T KNOW WHAT SIZE BAGS IT TAKES


... Kenmore Vacuums

Kenmore 21875 One day it's working fine. Next day, it won't turn on. When I attach the hose to another vacuum cleaner, it runs. Is there a reset button on the canister? Could it be the receptacle is bad?


My first recomendation would be to try pluging into a diffrent wall outlet as well as something that is on a diffrent circut . It is a known problem that the pins inside that make the connection could be worn out . There are several pins from the one ... Kenmore 21513 Vacuum

Kenmore Progressive canister model 116.27514700 Problem: Vacuum motor won't turn on. The power head operates, but nothing from the vacuum. Have checked all areas of airflow: hose, bag, motor filter and hepa filter. All are fine. Have checked and rechecked all electrical connections, all seem to be in working order. Vacuum hasn't run for a week or so, so it's not the thermal protector, unless it's defective. Vacuum was running fine last week. Didn't stop operating when using. Went to v


Hello! The culprit is the PCB Assembly; Part # KC86WBZR3000...Cost is $6.99. I would remove and inspect for burnt components, or broken wires...Then clean connections both male/female using an eraser, toothbrush and alcohol...Using a bright ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0485 seconds