Having problems with your Kenmore 25512/ 25513 Progressive Canister Vacuum ?

My Kenmore progressive 25513 506 Won't turn off

\015 I have to unplug it to turn it off. please help!\015

Answers :

You need to buy a new pc board which is in side the canister between the motor and the power cord. first remove the lid. just pull it back real quick the it will come off. you might think you broke it but if done right it won't. now lift up but don't pull off the small lid in the back where the power-mate jr and look in the back for 2 screws remove those plus the 2 in front and pull the cover up. make sure to see where the wires are, if you don't the cover won't fit right when your done. between the pwr-cord and the motor is a pc board which needs to be replaced. just keep track of the wiring. if you can't do all this take it to Sears.
good luck
Repair Help & Product Troubleshooting for Kenmore 25512/ 25513 Progressive Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore progressive direct drive roller wont turn


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmoore beltless vaccum brush wont turn - Kenmore 35912 / 35913 Progressive Upright Vacuum


... Kenmore 35912 / 35913 Progressive Upright Vacuum

Wheel wont turn - Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum


... Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum

My Kenmore Progressive Vacum canister wont turn on how do I remove the cover to check the fuse without breaking the cover?


... Kenmore Vacuums

Agitator wont turn - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Some of these have a resetable circuit breaker, if it has one, push it. There is a motor on the brush roll which could be bad. There also is an on/off switch, it may have a problem.Also may have a switch where the hose goes into, some models have a ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore canister model 116.25513506 wont turn on. when handle switch is turned to floor. vac motor does not turn on. When switch is turned to carpet, floor nozzle works but vac motor does not. I checked fuse, all o.k. checked continuity for plug, o.k. removed wires for bag full switch...motor wont run. I wired motor directly power cord...motor runs. Thinking it must be the circuit board, how do I bypass it or test it?


... Vacuums

Kenmore 21875 One day it's working fine. Next day, it won't turn on. When I attach the hose to another vacuum cleaner, it runs. Is there a reset button on the canister? Could it be the receptacle is bad? My Kenmore Progressive won't turn on today either -but was fine last week. I cleaned the filters checked for blocked air, tried a different outlet and no luck. I'll check the pins on the connections and see if one of them is not matching up or appears worn.


Give the prongs a wiggle and see if there is any play in them.Might just be a plug end. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore Canister Vac, Progressive, 25512 255513 model. Brush won't turn. One end of the brush roller, end closest to belt, is off center which is keeping it from turning freely. The end cap is like a square. Other ends turns fine. Do these end caps come off? If so how? Can't get it to budge. This is exactly what is keep brush roller from turning.


Take a flat head screw driver and pry the end cap off. It will come off. You might have some string or hair around it causing it to not turn. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a Kenmore Progressive upright model 216-37100800. It is only around 1.5 years old. My wife said that one day after she plugged it and turned it on, it whirred up but then shut off. Since then it will not start. I have noticed that right after I plug it in, if I try to turn it on, the first yellow light in the series of dirt sensor lights turns on then shuts off. After that the light will not light up on pressing the power button, unless I unplug it and plug it back in again. I have seen o


... Kenmore 25512/ 25513 Progressive Canister Vacuum

My Kenmore Progressive Vacuum canister won't turn off.


The two run on there separate switches. so notrhing is wrong with it ... Kenmore Vacuums

My kenmore progressive vacuum doesn't turn on


... Kenmore Vacuums

Kenmore vacuum handle wont stay up - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

We have a zenith dehumidifier model ZD300 & the bucket full light keeps flashing. the percentage number wont go higher than 1%. we have turned it off/on & unplugged it. When we do this it will reset to 40% for about 2 seconds & then goes back to 1% & the bucket full light starts flashing again. The bucket is empty & we have cleaned the filter. We have only had this dehumidifier about 7 months. Please help us.


I've had the same issue with mine. I am a 12 year refrigeration tech. I checked the float switch which would normally cause that indication light. However manually pushing the switch and then checking it with an electric meter that was not the case. ... Vacuums

Motor wont start on my kenmore intuition 116 - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?


Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

Kenmore central vacuum wont turn off at handle,


... Vacuums

Kenmore vacuum - no suction, brush wont turn


Sounds like the vacuum is clogged and putting too much stain on the agitator, so I would clean out the entire passage way for the vacuum and replace the agitator belt, you must clean out all the hoses it is clogged somewhere ... Kenmore Vacuums

Kenmore progressive model 38812790 smelled like rubber burning then the brushes stopped turning. Does it have a belt, if so, how do I get to broken belt to replace?


... Kenmore Vacuums

The brush on my kenmore progressive direct drive intel clean won't turn


... Kenmore Vacuums

Kenmore progressive model 11635922500 brushes dont turn


... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

My Kenmore progressive 25513 506 Won't turn off


You need to buy a new pc board which is in side the canister between the motor and the power cord. first remove the lid. just pull it back real quick the it will come off. you might think you broke it but if done right it won't. now lift up but don't ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore progressive bagless brush roller won't turn


Sounds like the brush belt is worn or torn ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore progressive 360 will not turn off


I have the same problem. Couldn't turn it off and now it doesn't work for the floor setting (though I can now turn it off). I suspect the switch in the handle is the problem but having trouble opening the handle... ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Kenmore vacuum- no suction, brush wont turn


Sounds to me like you have a plugged vacuum. Check all the way through. ... Kenmore 22812 Bagged Canister Vacuum

The brushes are not turning on my Kenmore Progressive drive vacuum cleaner


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0483 seconds