Having problems with your Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum ?
BELTLESS BRUSH WILL NOT REVOLVE
\015 Belt-less brush does not turn forward to pick dirt up. I have a Kenmore Progressive up right vac\015
I bought my parents the exact same model. Do you have the floor select switch "ON" for the brush? Did the overload protector switch trip? There is a little red button sticking out from the right hand side of the head. Check to see if it is pertruding past the cover. If so, push button in and it should reset.
Repair Help & Product Troubleshooting for Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
BELTLESS BRUSH WILL NOT REVOLVE
I bought my parents the exact same model. Do you have the floor select switch "ON" for the brush? Did the overload protector switch trip? There is a little red button sticking out from the right hand side of the head. Check to see if it is pertru ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum
I removed the revolving brush to remove a jammed piece of debris I had picked up and after putting brush back, it no longer revolves
Reattach your belt properly and the beater will function.\015\012\015\012Thanks for your interest in FixYa.com ... Vacuums
I have a model 116.35922 beltless drive vacuum. The agitator brush will not turn with the vacuum running and the handle down. The brush turns by hand and the reset button has not popped. Ther is nothing wrapped around the brush, but it does feel to have some resistance when moving by hand.
Wich bags for vacuum cleaner kenmore model 116.35922 ... Kenmore Vacuums
Kenmore 35923 beltless brush not working after rolling up shlace.
Its due to the grip of the brush and the motor not getting fit its became little bit like streched so this happens and in this case replacing the brushes and checking any other component broken near to it is necessary. ... Kenmore 35912 / 35913 Progressive Upright Vacuum
The brush does not go around. The rubber band on the brush also does not revolve.
That means that you need to replace the the belt. You can get replacement belts here:Replacement Vacuum Belts ... Vacuums
Should the brushes revolve something got caught on the brushes when vacuuming up
Yes, the brushes (beater bar) should revolve. Even though the brush is spinning, you probably need to replace the belt ... Electrolux Vacuums
Hoover hu 4207/1 pet hair removal turbo brush wont revolve
Try Larryclare1's solution for a Kenmore and see if it helps. Worked wonders for both my turbo brush attachments. http://www.fixya.com/support/t1095798-kenmore_model_116_powermate_jr_stopped ... Vacuums
I have a kenmore beltless upright the beater brush dosetn spin
If it is direct drive then the motor or the wireing to the motor are bad. If it is gear driven then the gears are probally stripped. ... Windsor SR12 Sensor Bagged Upright Vacuum
The brush does not turn on my kenmore intelliclean beltless drive upright. how do i correct this?
... Kenmore Vacuums
Revolving brush at front of machine has stopped spinning, what could be wrong
Hi there, I'm sorry to hear you're having difficulties with your DC24. If the brush bar won't rotate, you may need to reset the machine - please follow the steps shown in the video below to do this. When pressing the red reset button, you may ... Dyson Ball DC24 Bagless Upright Vacuum
Kenmore progressive upright, beltless vacuum, the roller w/ brushes won't turn, no belt to chane.
They usually have belts for that kind of thing at walmart! ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum
Brush won't turn (beltless model) even when pushing reset button
There is a floor select switch "ON" for the brush? Did the overload protector switch trip? There is a little red button sticking out from the right hand side of the head. Check to see if it is perturbing past the cover. If so, push button in and it s ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum
I have a Bissell Proheat model 7901. When I pull the trigger on the handle, there is no water flow. The brushe revolves and the unit vacuums any water spilled on the floor. Could it be a failed pump or kink hose or ? Thanks Zap
Take the handle apart and put spring back into place. ... Bissell Vacuums
I have a hoover windtunnel v2 the brushes underneath wont turn ? its suppose to be beltless what do i do to fix this
Are you sure it is beltless? What model do you have? Looking at another manual there may be a seperate on off switch for the brushes but would need to know your model to be sure. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
Cord got into brush area. pulled cord and now rollers will not turn. Beltless drive Vacuum kenmore 3 years old 11635922500
Greetings,Your Kenmore Beltless Drive upright model 116.35922500 has an overload protection system designed on it. This will prevent anything from damaging the brush motor, or your roller brush if you were to vacuum up something in it (i ... Vacuums
Brush wont revolve - Dyson DC07 Bagless Upright Cyclonic Vacuum
Hi there, There are a couple of reasons that the brush bar will not spin on a Dyson DC07. 1. The carpet / hard floor selector is set to hard floors. 2. There is material wound around the brush to the point that it is jammed ... Dyson DC07 Bagless Upright Cyclonic Vacuum
My Bissell lift off pet bagless is making a higher pitched noice. It sounds like the engine is workinge extra hard. I have checked the filters, belt, revolving brush, and checked for plugs. What do I do now?
We would like to assist you with troubleshooting suggestions. Please call us at 1-800-237-7691, Monday - Friday 8 a.m. to 10 p.m., or Saturday 9 a.m. to 8 p.m., ET. A representative will assist you. There still may be a clog that is causing what you ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum
Kenmore Beltless Vacuum brush will not spin. Everything else works.
There is a reset button on the side of the lower base of the machine, plug in the unit turn on the switch to the brush and vacuum are both engaged hit the reset button, remember the roller will not engage when the handle is in the upright position, r ... Vacuums
Brush on progressive beltless vacuum is not rotating and reset button is not kicked...appreciate some help...steve
Before you replace any parts, I recommend that you unplug the ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum
Revolving brush stopped after I got a sock snagged in it.
If the Dyson model has a brush bar control roller at the left hand side of the top hood then it won't be able to be repaired unless its by a Dyson call out or someone who repairs Dyson models with brush control protection. \015\012\015\012If th ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Beater brushes sometimes work and very often not. Hoover windtunnel bagless and beltless
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=783732\015\012Generic problem for all Vacuums\015\012Beater brushes sometimes work and\015\012Po ... Vacuums
The brushes won't roll on my beltless Kenmore progressive upright vacuum
... Kenmore 34923 / 34925 Progressive Bagged Upright Vacuum
How do get to the belt on a Dirt Devil M6915-1 as I believe the belt is broken. When on the brush does not revolve.
... Dirt Devil Vacuums
Bad Motor I have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust. Took it to a vacuum repair shop. They said the brushes were going and thus the motor was shot. I liked the vacuum and bought a second, 1 year later the motor is making a slight noise that and removing the HEPA filter I find a slight metall
That dust is from the carbon brushes on the motor. You may need to check them, and also clean out the motor compartment. A slight noise could be a motor bearing starting to go. Does the smell like rubber or electrical. If rubber, then the belt h ... Vacuums
Rotator brush not spinning. Handle is not in the locked upright position. Says it's beltless, so is this likely an interlock switch or drive motor problem ?
Hi, the brush roll will only spin when your handle is not in the locked upright position, once the handle goes upright - the brushroll de-activates ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum