Having problems with your Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum ?

I have a kenmore progressive with direct drive that is very dificult to move forward and back when vacumming what is the problem. i do not have the owners manual.


Answers :

Umm....it's a Kenmore ( sorry )
Repair Help & Product Troubleshooting for Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kenmore progressive with direct drive that is very dificult to move forward and back when vacumming what is the problem. i do not have the owners manual.


Umm....it's a Kenmore ( sorry ) ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

I have the Janome 6600 P. Beginning a seam the thread knotted and the machine made noise and needle would not move either up or down. I manually moved the needle using the handwheel and cut away the knotted thread. I began sewing again but instead of starting at the edge began about a half inch down, forward stitched, reversed to lock threads and problem repeated and received the message to "Stop for safety purposes". Did that. Referred to the manual, tried manual recommendation. Did not work. I


... Vacuums

I have an animal dyson. The front nose dives into the carpet when moving the dyson in the forward motion, fine when pulling back. A huge amount of effort is required to move it forward. Took it to a technician and he said he could find nothing wrong. He had only short nap carpet for test. Works fine on short nap, if the carpet nap has any lenght to it like shag, the dyson severly nose dives. It's like the nose is sucked into the carpet. This problem just occured after the wife used the ho


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Vacuuming it is hard to move forward when vacuuming,ok when moving back


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11561&thid=725106\015\012Vacuuming\015\012Posted by egarcia on Jun 30, 2008\015\012It is hard to move forward whe ... Kirby G5 Bagged Upright Vacuum

I was given a Kenmore progressive hepa filter 22313 Bagged Canister Vacuum recently, but don't have the manual. We used it once to vacuum the house and it worked beautifully. Then we used it 5-6 days later and it started whining and getting hot. What year was this vacuum manufactured? Where can I download an owners manual?? Help!


Http://www.managemylife.com/mmh/owner_manuals/5461/KENMORE-Vacuum-Canister-L0809572 ... Kenmore 22313 Bagged Canister Vacuum

Owners manual kenmore progressive 116


... Kenmore 25512/ 25513 Progressive Canister Vacuum

I am lookin for an owners manual for a kenmore progressive directdrive intelliclean upright vacuum


... Kenmore Vacuums

I need owner manual for my kenmore progressive 360 canister vacuum cleaner 116.2508590. Thank you, Jim


Try to look in this link: owner_manuals/search/product_type.Vacuum,%20Canister?page=4&query=Ke ... Vacuums

Owners manual for kenmore progressive direct drive vacuum modesl 31913100


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

I have a Bissel Pro Heat Plus and I used it once, one year ago. I may be using it wrong, as my carpets were wet and there was no return (dirty water). If I remember correctly, going forward wets and cleans the area and to dry the area you move backwards. Please help, as I can not find my manual anywhere (which is not like me). HELP!


It has only one tank that serves two purposes. It holds the clean water and collects the dirty water, so you only have to empty/fill one tank. If you check reviews of this machine you will see that they basically stop working correctly aft ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My machine (Hoover Wind Tunnel - bagless) is only 1 yr. old. The agitator brush doesn't turn all the time. I know it's not supposed to turn when in the upright position. However, it only seems to work when I have the setting on high. When I stop, but have not put the machine in the upright position, it stops again and then slowly starts moving. Could the V-belt be worn out already? In the owner's manual it states that this belt is not normally replaced. The exact same thing happened with my old


Sounds like you should do two things:\015\0121- Remove and clean the beater brush of all debris as best you can. At the end of the brush you will see a hard rubber piece, at both ends, that holds it in place in the body of the vacuum.\015\012Add som ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Bissel proheat pet is only sucking up water via hand tools or when in upright position - when lean back to move forward it stops picking up water/solution.........


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Roomba Discovery Roomba is fully charged and cleaned with sensor wiped clean. When turned on it it sounds normal and commences to go, but it then acts like it is putting on the breaks, spins, tries to go and manages a short distance and breaks again, just not making any progress because it keeps breaking after a foot or so and turns and tries again. Sometimes is gets so stuck from moving forward at all, like it is stuck in one spot just trying to go while seemingly surrounded by barriers. Somet


I had the same back-up, turn, move forward a couple inches, backup-up, etc. problem. Try cleaning/cutting the hair, etc. out from around the brushes, as well as around the ends of the brushes. Also, try a Q-tip to clean out the four pair of sensors ... Roomba Robotic Floor Bagless Vacuum

Need to find an owners manual for a Regina Dirt Magnet vacuum. I took it apart and now can't figure out how to put the belt back on.


... Vacuums

Owner's manual sears progressive 21514 - Vacuums


... Vacuums

Need owners manual kenmore progressive vacuum 116 model #39712991


... Kenmore Vacuums

I took my vacuum cleaner apart to clean it because it was clogged inside and now I am having trouble putting it back together. I am looking for a manual of some kind to show me how to assemble it. It is a Kenmore Progressive Model # 11636933502


... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

HI, I'm trying to find a part for a Sharp upright vacuum. Its the back part of the handle where the cord is stored. I have taken it off but can't find any part # on it. The model number for the vacuum is EC12TWT4. I was thinking that if I could find a free owner's manual, that would give me the part # and then I could look for it on the net.


Any vacuum repair shop should be able to get it ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Kenmore progressive 200 owners manual - Kenmore Vacuums


... Kenmore Vacuums

I need an owners manual for this vacuum - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


The manual in pdf format can be downloaded at the below link.\015\012\015\012http://www.hammerwall.com/Download_Manual/11413/ ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Does the Bissell Model 8909-2 Momentum Cyclonic have more than one filter which nees to be cleaned? I located the pleated filter on the back or underside of the canister but have not located a second filter which it may have. Owners manual is misplaced.


... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

The beater bar moves when I push the vaccum forward but it just drags when I pull it back, but when I flip it over to have a look it easily turns both ways. How do I fix this?


The belt is stretched that is why it is doing that. You need to replace the belt. Here is a link to the belt you need and the manual which has instructions: ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Need owners manual kenmore progressive vacuum 116 model #39712991


... Vacuums

I need to know what style replacement belts and bags to use, as well as an owner's manual. Thanks.kenmore progressive 116 38612790


... Vacuums

How do i remove the reel cover for my SEARS canister model 116312690 vacuum cleaner. we are unable to move the cord forward or back. We have found two screws, but are still unable to remove the cove


... Kenmore Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0824 seconds