Having problems with your Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum ?

My vaccuum has no more suction

\015 Please help i don't what to do with my kenmore progressive direct drive, does it take a belt? why does it have no more suction, hapened after i changed the bag.\015

Answers :

There is no drive belt on a progressive drive vacuum. It is direct drive meaning it is attached via the motor. No vacuum means no air flow somewhere in the unit. Torn bag,Wrong bag, pluged filter under bag.Make sure the opening in the bag is the correct size,too big and it will not seal. Make sure when you close the housing it seals also. No housing seal no vacuum. Kenmore vacuums tend to be plastic housings. Cracks are comon in the wheel housing area. Check there first. Plastic expoxy will work with this fix if so needed.
Repair Help & Product Troubleshooting for Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No Suction The suction of the vaccuum has stopped. We haven't had the vaccuum for very long and the bag has been recently changed. Both the floor vaccuum and the hose are not picking anything up. I'm not sure what the problem could be.


Your Power head is blocked with hair or dirt,,or the hose which connects the Upright with the power head is blocked.Try taking a steel coat hanger apart (straighten it out) and then push it into the pickup hose to remove blockage. ... Eureka Smartvac 4870 Bagged Upright Vacuum

My vaccuum has lost suction. I changed the bag and cleaned everything out. The vaccuum is only 6 years old. I even replaced the belt around the brush. When I turn the vaccuum on it smells like burning rubber. My vaccuum is an upright 12 amp model #33000300C serial #Y347012385


... Kenmore Vacuums

Decreased suction was using to vaccuum carpet and suction decreased..nothing plugging hose....suction remain at unit canister and exhaust is fine....suggestions??


You might have a clog, to try and unclog the lines, you need to unplug the unit, and remove the bag compartment. Then take a shop vac using the hose attachment hold it into the attachment door where there is low suction and try to draw the clog out t ... Broan-NuTone CV353 Central Vacuum

I accidentally vaccuumed up some wet items with my James so the white cloth filter became wet and suction was lost. It was making a sort of vibrating noise as if there was something stuck in the tubes. I have bought a new white filter but still have no suction. Any ideas?


Did you check the impeller fan that sucks air?\015\012Sometimes the motor runs and the suction impiller don't move at all!\015\012It doesn't go with the rotation of the motor itself!\015\012or\015\012Something stuck in the fan ... Numatic James JVH180 Wet/Dry Vacuum

Not picking stuff up and no suction in hose as well, suction sounds good until you go to vaccuum floor


Because this unit is bagless there are more gaskets to seal the suction portion of the vac. you are most likely missing a seal, can you remove the basket and place your hand near the suction on the vacuum? it is shielded so you wont lose fingers. if ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Eurika Vaccuum 12V Mega Boss - the suction is fine with the extention tool however when there is no suction at all when the extention wand is not in use.


There is a blockage behind the brush between where the suction tube hooks up and the brush. ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum

My vaccuum cleaner is an EVERSTAR 1200. I turned it on - everything appears OK until I realize that it is not suctionning. I cleaned out the canister - made sure the vacuum was not obstructed. Still no suction. What could it be?


First clean the filter on top of the canister, do not wet it, blow it and get all the accumulated dust out. Then check the hoses for obstruction. There should be an emergency valve on the rear part, if it is open, you better ck the hoses. ... Vacuums

I have a Sanyo Performax 12 amp upright vaccuum. It has lost its suction completely. All hoses and airways are clear, new bag, exhaust works, roller bar works.... but no suction - what might the problem be? thanks, Shelley


... Sanyo Permax SC-A102 Bagged Upright Vacuum

My Dyson DC14 all surface vaccuum does not have suction except when it is upright. The brush is spinning but very little to no suction.


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

My dyson dc17 animal will pick up via the hose attachment but there is no suction when you use the regular vaccuum on the floor - you can hear the difference in the suction once you put the floor part down - we took it apart - cleaned it - checked all hoses - still does not work????


Hi its Darran at Dyson.Check that the brush control dial is in the centre position when upright and then moves forward when the head is released. If the brush bar is still not spinning when switched on in the vacuuming position, check th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dc14 animal works fine in Vaccuum mode but when I switch to the extendable tool the sound of the vaccuum changes to a higher pitch noise and I get very little suction through the hose. Any suggestion


Your hose has a restriction. To fix this, use a broom handle and insert it into the hose as far as it will go. If the hose can be removed, take it off completely and do this, if not be careful so as to not damage the sweeper with the handle. anoth ... Dyson DC14 Bagless Upright Cyclonic Vacuum

My vaccuum has no more suction


There is no drive belt on a progressive drive vacuum. It is direct drive meaning it is attached via the motor. No vacuum means no air flow somewhere in the unit. Torn bag,Wrong bag, pluged filter under bag.Make sure the opening in the bag is the corr ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Suction not working on vaccuum.


Check for a blockage in the hose, or a tear / hole in the hose between the "pleats" ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

VACCUUM SEEMS TOOST SOME OF ITS SUCTION POWER


How often have you changed the filters in the vacuum?-- and when was the last time you did it now?Obviously emptying the dirt collecting chamber OFTEN helps the vacuum-- but then in addition, there are several filters-- are they c ... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

The vaccuum is not picking up especially on rugs even though the roller is spinning. The hose has tremendous suction/.


... Dyson DC14 Bagless Upright Cyclonic Vacuum

I have a Kenmore Progressive Canister type vaccuum, #116.25614503. I need a manual for it. Is there one I can download? Also, there's no suction with the attachment that does carpets/floors


Http://www.managemylife.com/mmh/owner_manuals/5221/KENMORE-Vacuum-Canister-L0704172 ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Eureka the boss vaccuum will not suction - Eureka Atlantis 2590A Wet/Dry Vacuum


... Eureka Atlantis 2590A Wet/Dry Vacuum

There is no suction from the hose on a Kenmore Destiny Plus Vaccuum Cleaner


There is clog in the unit. Either the bottom or in the hose. If you can take hose off, stick hose on end of broom handle and push out clog. ... Kenmore Canister Vacuum Vacuum

I have a Eureka Altima vaccuum and it no longer suctions like it use to and also has a burning smell. I have cleaned all filters, brush, hoses, and filters. There are no blockages. I have also checked the belt and it's still good. Any other ideas as to what may be the problem?


This bagless model gets buildup of really fine dirt in the motor and starts to clog up the fan airducts. You will need to take the motor out and clean it. ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

MY vaccuum wont suction or turn at the brush bar. The wand works and I already checked/cleaned all the areas the instrucion manual said to.


The DC07 has a "brush control system" operated by a knob on the right side of the base. This knob has two positions: "bare floors" (or "off") and "carpet" (or "auto"). The roller will turn only when the knob is on "carpet", and even then only w ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My vaccuum lost suction - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


CHECK THE HOSE TO SEE IF THERE ANY OBJECTS BLOCKING AIR FLOW,ALSO CHECK THE BELT TO MAKE SURE IT ISN"T SLIPPING OR BROKEN. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Does not have the same suction as when we first purchase the vaccuum. it is only 2 years old. We cleand the round filter at the bottom of canister. Any suggestions?


Sounds like you have a clog in the hose or from brush to the hose. To clrar turn vacume over and remove bottom cover to unclog where it meats the hose. I would use a coat hanger to unclog the hose. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My kennmore cleanscape vaccuum has no suction


Take the hose off and clean the inside real good chances are its clogged up ... Kenmore Vacuums

Vaccuum suddenly lost suction, and is spitting out dirt. ive cleaned the filters, emptied the container, and checked the hoses for blockages. still doesn't suck.


... Dirt Devil M084500V Vibe Quick Vac Bagless Upright Vacuum

As i vaccuum the suction dissipates and brush light flickers between green red and off...?


... Fantom Vacums XT450K Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0389 seconds