Having problems with your Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum ?

How do I replace brush - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Answers :

Hi,

Replacing the brush roller of a Kenmore Progressive upright vacuum is a job that can be accomplished in just a few minutes. The Kenmore Progressive vacuum uses a motor-driven brush roller and does not have a belt, which reduces the maintenance needed on the vacuum. You can replace the brush roller yourself and save the time and expense of having someone else do the work for you.

Step 1 Unplug the electrical cord of the Kenmore Progressive upright vacuum cleaner from the electrical outlet before attempting to replace the brush roller.
Step 2 Press the handle release button on the base of the vacuum and let the handle move to the lowest position.
Step 3 Turn the vacuum cleaner over so that you are looking at the bottom of the vacuum and use a screwdriver to unfasten the screws on the bottom cover plate.
Step 4 Take the bottom cover plate off the vacuum and locate the brush roller at the top of the base plate.
Step 5 Place a screwdriver on one end of the brush roller and pry the roller away from the base plate, lifting it out of the vacuum.
Step 6 Take the end caps off the brush roller and place them on the ends of the new brush roller.
Step 7 Slide the brush roller into the vacuum base, prying out on the side of the base with a screwdriver until the roller fits in the base.
Step 8 Place the base plate back onto the vacuum, securing it with screws and turn the vacuum back over.
Step 9 Plug the Kenmore Progressive upright vacuum cleaner into the electrical outlet.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
Repair Help & Product Troubleshooting for Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I replace brush - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Hi,Replacing the brush roller of a Kenmore Progressive upright vacuum is a job that can be accomplished in just a few minutes. The Kenmore Progressive vacuum uses a motor-driven brush roller and does not have a belt, which reduces the mai ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore elegance bag replacement - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Brushes don't move. vacuum motor works - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


The brushes on the roller are driven by a wide, short rubber belt. These belts get old, worn, overheated, and break periodically.It should be a fairly simple matter to unscrew & remove the plate, revealing the belt and roller assembly. Yo ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

The brush is not rotating - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Try pushing the reset button with a pen or paper clip. If that doesn't work, the motor may need to replaced. If the reset button is stuck, I don't know how to fix it - mine has the same problem. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore upright vacuums Model 11635922502 - Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum


What is the issue or problem? ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Model #11636923502 Kenmore Upright vac - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

116 36932502 kenmore model - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

I need an owners manual for this vacuum - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


The manual in pdf format can be downloaded at the below link.\015\012\015\012http://www.hammerwall.com/Download_Manual/11413/ ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

My vaccuum lost suction - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


CHECK THE HOSE TO SEE IF THERE ANY OBJECTS BLOCKING AIR FLOW,ALSO CHECK THE BELT TO MAKE SURE IT ISN"T SLIPPING OR BROKEN. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Agitator wont turn - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Some of these have a resetable circuit breaker, if it has one, push it. There is a motor on the brush roll which could be bad. There also is an on/off switch, it may have a problem.Also may have a switch where the hose goes into, some models have a ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

High pitched noise - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore progressive upright (direct drive) with bag has low suction and the beater bar does not rotate. Also, it is not obvious how to get inside the vacuum


Hi there,\012First of all you look for a reset button on the motor and press it in with cleaner plugged in and turned on, push the little reset button on the side of the lower base of vacuum. Remember that the brush will not turn in the u ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

HOW TO CHANGE A BELT - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


Hi there...You will need a Phillips screwdriver to get the bottom cover off.Remove the screws and then remove the bottom cover.Clean out any excess dirt in the general area of the roller bar and motor assembly area.Place one end of the belt over the ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Does the gentle sweep work at all times? - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

The machine is blowing instead of sucking - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


NOT MY PROBLEM:) ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

The sweeper wont move - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

The suction doesn't work. what can i do - Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum


I changed the two filters on mine and pressed the reset button and that worked. ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

How to reset - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Power but not sucking up.. - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


You have to check two thins\0121 that none of the hoses or filters are clogged on the unit. This is not always so easy but the entire run of the hose till the bottom must be clear.\0122 You have to have the door th the bag closed properly. If there a ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?


Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

Bad Motor I have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust. Took it to a vacuum repair shop. They said the brushes were going and thus the motor was shot. I liked the vacuum and bought a second, 1 year later the motor is making a slight noise that and removing the HEPA filter I find a slight metall


That dust is from the carbon brushes on the motor. You may need to check them, and also clean out the motor compartment. A slight noise could be a motor bearing starting to go. Does the smell like rubber or electrical. If rubber, then the belt h ... Vacuums

I just bought a good Sears Kenmore Progressive 300 upright vacuum (116.38812891) today at a garage sale for five bucks. I left my relic Electrolux with the new owners of my former home during a recent relocation. In the interim I bought a Bissel 3750H which I do not care for, and borrowed a Eureka 7685 AU which performs somewhat better. I cleaned up the Kenmore, and though it seems to run well, noticed the drive belt is showing signs of degeneration. I would like to replace it, but was unable t


... Vacuums

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?


Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I'm surprised it lasted as long as it did.\015\012This is where a vacuum that won't run without a bag would have been nice. (Aerus for one) ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

My question earlier today referred to a Kenmore Progressive upright vacuum. Your answer suggested that I change a belt, if the reset button did not work. Does a direct drive really have a belt? Regards, Jim Buckley


Direct drive does not have a belt. It is a shaft with gears. What is wrong with your vaccum? Maby i can help. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore progressive direct drive upright vacuum won't turn on is there a fuse?


... Kenmore Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1406 seconds