Having problems with your Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum ?
Kenmore agitator brush does not spin
\015 Agitator does not spin\015
Sounds like ya need to replace belt.
Repair Help & Product Troubleshooting for Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Kenmore agitator brush does not spin
It's beltless. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum
My kenmore power spin shampooer's brushes do not spin and how do I clean those brushes . Can they be removed?
... Kenmore 85930 PowerSpin Deluxe Upright Wet/Dry Vacuum
I have a kenmore cansiter hepa 360 model 11629219800 the agitator will not spin it spins frely checked the belt it is in good shape ?
... Kenmore Vacuums
Rotating brush Hello, my kenmore rotating brush is not spinning at all, and its causing the motor to cut the belt. should i get a new brush? Thank you.
Sounds like the brush roll has an end that is melted or frozen up so it won't move, in which case you need to replace it. ... Vacuums
My simplicity 7 series vacuum belt turns the agitator (beater brush) turns freely by hand when the vacuum is unplugged or off but when I turn the vacuum on the agitator does not spin even though the belt is moving. Could there be a worn out part at the agitator pin where it connects to the flywheel that the belt is connected to?
The agitator brush on my Hoover vac. won't spin when it is lowered to the carpet.
Brush not spinning on Kenmore vacuum - Kenmore Vacuums
Here is one of my Tips on the problem you are describing:www.fixya.com/support/r6311178-vacuum_brush_bar_not_spinningIf you have furt ... Kenmore Vacuums
The brush on my Kenmore Pet Power Mate no longer spins. I opened it up and found the problem may be with the rubber band connecting the spinning parts. Where might I purchase a new rubber band for it?
Try this link > http://www.vacuums24x7.com/kenmoreparts.html ... Vacuums
Brushes spin and stop spinning - Panasonic Kenmore Canister Vacuum Vacuum
... Panasonic Kenmore Canister Vacuum Vacuum
Agitator unit on Kenmore Progressive 116.25915503 won't spin. I have cleaned out all hair and string wrapped around it. Belt is good. It seems to spin on one side but stuck on the other. Could string be caught somewhere?
Pry the end caps off the brush bar, you will find hair and string wrapped up tight in the end. the bearing may also be shot, you can try and oil it up a bit to keep it spinning.\012\012<!-- from fixya rte --> ... Kenmore Vacuums
Agitator brush wont spin once vacuum is placed on floor
Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618889&thid=573865\015\012Agitator brush wont spin once vacuum is placed on...\015\012Posted by coral7980 on May 05, 2008\015\01 ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum
I have a kenmore beltless upright the beater brush dosetn spin
If it is direct drive then the motor or the wireing to the motor are bad. If it is gear driven then the gears are probally stripped. ... Windsor SR12 Sensor Bagged Upright Vacuum
I have a Kenmore Vacuum Cleaner, Model No. 11635923502. The agitator stops spinning when the handle is raised from its lowest position to about a third of the way up.
Should the agitator brush spin on bare floor setting?
... Eureka Vacuums
Bottom agitator brush doesn't spin
... Dyson DC25 All Floors Bagless Upright Vacuum
I have a kenmore cleanscape upright- the light and suction just clicked off, but the brush still spins
That makes me think that you've tripped a safety switch or have blown a fuse. Have no idea where it would be.... but I would look for a reset button first. Good luck ... Vacuums
Kenmore 31913 Progressive Direct Drive brush not spinning
... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum
The brushes have stopped spinning. This is a
The brush spins on a bearing, you might want to get to the bearing and make to it has not cracked or broken. ... Kenmore 33923 Bagged Upright Vacuum
A piece of string / cord has wrapped around my Kenmore spinning brush end on the 12 Amp Power - Mate. How is the best way to get the cord off?
Cut the string with a knife or scissors and pull it off. You can turn the brush manually to ensure you get it all. ... Kenmore 22313 Bagged Canister Vacuum
Agitator brush It won't spin. I have replaced the belts but they just burn up soon after turning on the machine.
Is the brush turning free on its bearings , Is the end of the motor spindle clean ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum
Kenmore Beltless Vacuum brush will not spin. Everything else works.
There is a reset button on the side of the lower base of the machine, plug in the unit turn on the switch to the brush and vacuum are both engaged hit the reset button, remember the roller will not engage when the handle is in the upright position, r ... Vacuums
Need agitator unit (roller brush) for Kenmore 721.33189 vacuum.
Go to www.acevacuums.com they will have that for you to purchase ... Vacuums
Hi good day, I have a Kenmore Grab n Go 12.0AMPS Vacuum cleaner, Model# 116.34722402 & serial#T53601507. The vacuum is now having a problem whereby the rolling brush underneath is not spinning when the vac is on. This has caused it to stop sucking up dust. Could you please advise as to what might be the problem. Thanks in advance for your kind assistance. regards, Clarance
... Kenmore 34722 Grab-N-Go Upright Vacuum
My Kenmore canister model (116) 26212601 works in hard-surface mode (basic suction), but the brush won't spin for carpets, and when I try to turn it on, it makes a whiny sound and then turns off as it does when I need to press the overload button. I looked inside a bit, and the belt isn't broken--it seems fine. So not sure what the problem is. Thanks for any help.
... Kenmore 27815 Bagged Canister Vacuum
My kenmore vacuum model 116.36933502. It has no suction. I have cleaned out every spot,taken off the back and still nothing. The motor runs but doesnt seem to be at full power. The agitator brush works. When it broke i seemed to smell something and since it has no belt. Does this possibly have to motors?
... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum