Having problems with your Kenmore 35622 Upright Vacuum ?

Kenmore 116 bagless

\015 The roller wont turn. If you are facing the Vac the left side doesnt spin like the right side does.\015

Answers :

Hi from uk not conversant with your vac but if it has only one belt that drives the roller brush ? i would suspect that the actual roller has split in centre remove roller to check it? suggest you renew drive belt to provide extra life if it has not been replaced recently or at all?
Repair Help & Product Troubleshooting for Kenmore 35622 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore bagless upright vacum model 11631100 - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

My Kenmore progressive vacuum is extremely loud. The airflow and suction seem to be uninhibited, but the noise is loud and frustrating. Should the filters just be cleaned or is this a sign of a different problem? It's a Kenmore Progressive Bagless Upright Vacuum 35912 and we've had it for about four years.


... Kenmore Vacuums

Kenmore bagless upright Model 116 - Kenmore 35912 / 35913 Progressive Upright Vacuum


... Kenmore 35912 / 35913 Progressive Upright Vacuum

Kenmore 116.36933502 - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore powermate 4.1 vacumm hose - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore Progressive Bagless vacuum cleaner


Check down by the brush roll to see if the inlet is clogged. This type of problem usually means there is a clog. But you do have a year's warr. on this, if you can't figure it out, then take it a Sears repair shop. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

As soon as I turn on my Kenmore upright bagless (twin chamber) vacuum cleaner, it makes a funny noise, then the red light goes on. As far as I can tell, there is no big clog


Have you replaced both filters? remove the canister and turn the unit on. feel at the inlet hole or under where the canister sits. If you have suction there and you installed new filters check in the hose for a clog, shine a flashlight at one end if ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a Kenmore progressive bagless vacuum with direct drive that was working fine but then the Inteliclean Technology just stopped working. Lights stayed green even though it should of been red.


... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

THe vacuum won't divert from hose to carpet - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


Turn the vacuum off, return the handle to upright locked position.Then securely fit hose into the hose holder.Then depress lever and engage handle into non-locked position, and turn on vacuum on "carpet" There wil ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Hard to push - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


Check to make sure you are using the proper level with the indicator knob located on the front head of your vacuum, using to low selection (bare floor) on carpet can be extremely hard to push in on or the other direction. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Hello! I have a Kenmore Progressive bagless vacuum with the Easy Clean extended life filter. The model number on my vacuum is 34728401. I was vacuuming the carpet when it just stopped running. The dirt sensor light will come on, but nothing else. The belt looks fine, and I don't see anything keeping the beaters from rotating. Help Please!!!


You can have power to the dirt light sensor, but it seems like the motor itself is not using the power supplied. ... Vacuums

I have a kenmore grab n go bagless and I need to know the exact size of the belt, I lost the manual, and I have burn several belts at the bigining of the problem the motor stops and burn the belts I open it and I think it was a little piece of plastic, that cause the problem, but when I put the new belt it looks like the motor works fine,but still burn the belt, I'm using UB-1 #5275 belt am I using the wrong one?


... Kenmore 34722 Grab-N-Go Upright Vacuum

I have a Kenmore bagless vaccum 12.0 amps I need help with get the canister off so it can be emptyed It is a upright vaccum.


Which model is it? ... Vacuums

Loud noise from Kenmore Progressive Bagless Inteli-Clean


Here is a possible solution. If the vacuum sounds normal when the green light comes on, then the issue is a suction bypass. Kenmore built ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

The beater bar does not turn. - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


It's a powered brush bar then. Can you unplug the power cord going down to the head and inspect the plug for damage? This may require some taking apart, do you feel this something you want to attempt? ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

My kenmore premalite vacuums wheels pop off - LG Electronics Premalite Vacuum Bagless Cyclonic Vacuum


... LG Electronics Premalite Vacuum Bagless Cyclonic Vacuum

Kenmore 116 bagless


Hi from uk not conversant with your vac but if it has only one belt that drives the roller brush ? i would suspect that the actual roller has split in centre remove roller to check it? suggest you renew drive belt to provide extra l ... Kenmore 35622 Upright Vacuum

Green light is blinking - Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum


Don't know what kind of vacuum you have need more information.also bag or bagless ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Why is it not sucking? Why the loud noise? I have a Kenmore Progressive bagless


It's plugged up. Maybe pet hair? Take the hose off and run something through it, clean all the filters, clear all airways if necessary ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore bagless upright 34720401


I had the roller on upside down so i just flipped it over and the top went right in place ... Kenmore 34720 Upright Vacuum

I have a Kenmore Grab n Go Bagless and it won't pick anything up. I've cleaned the filter and the hose and the roller.


I assume you have no suction?\015\012\015\012Could be either a seal is missing or there is either broken impellers on moter or debris caught in impellers or screen protecting impellers. Check to see if you feel air bblowing out or strang ... Vacuums

Kenmore progressive bagless brush roller won't turn


Sounds like the brush belt is worn or torn ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore progressive bagless no suction however brush runs well .


Remove all the filters and clean themon the bottom you have what is called an intake hose.you will see it as it comes up from the bottom and up on the backside.it connects to a fitting take the screw out and pull the hose away from the back.take a co ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore bagless upright Model # 116.35726401


There is actually an internal fuse in the vacuum. You may have blown this. The circuit board connected to the ON/OFF touch pad may be bad too but probably unlikely. There is also an overheat sensor that trips the vacuum off when it gets too hot. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Kenmore bagless 339123


Take the filters out and clean them.try taking the filters out and turn it on and see if you have suction then.if you do the the problem is the dirty filters.ok if you still have a problem feel free to call ma at 314-628-9153 and i'd be happy to walk ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0288 seconds