Having problems with your Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum ?

Performance Indicator light on

\015 I can't find the manual. What does this mean?\015

Answers :

This usually means a clog in the system or a clogged bag or filter.
Repair Help & Product Troubleshooting for Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Performance indicator light is on and suction is not strong


You do have a clog! trust me. Check the wand and the yoke which is on the brush assembly. its the part that connects with the wand.if thats not it then it has to be in the hose. the only way to get it out of the hose is to take one or both ends ... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum

Performance indicator light


Check to make sure the bag isn't being sucked into the air filter. open the access door where the bag is and you'll see the air filter at the bottom. to check, leave the door open while you would see the performance indicator light on, and then pul ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Kenmore progressive canister vac performance indicator light is on, but it isn't affecting the performance of the vacuum.


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Performance indicator light stays on


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Kenmore Progressive canister vacuum cleaner: MODEL # 116 27615700 When the vacuum cleaner is running, the performance indicator light is red (lit up). What should I check in order to trouble-shoot and solve this problem?


... Kenmore Vacuums

Suction power greatly diminished . Bag replaced...hose is clear...Performance indicator light is on and red..much less suction that it should have'


Clean the filter. ... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum

My Kenmore Elegance Canister Vacuum powers up but has no suction. Tried changing the bag and cleaning the hose. Still the performance indicator light comes on. Now what?


... Kenmore Vacuums

The performance indicator light is red and I have no suction.


If the motor runs, then the problem is usually plugged air passages near the bag/canister or the sweeper head/hose. Remove any hoses/bags/canisters so that you are dealing with only the vacuum producing parts. If it has a sweeper head, remove the bot ... Vacuums

Model 116.25614506 performance indicator light on


... Kenmore Vacuums

The performance indicator light has come on on my Eureka capture plus. Last night a t-shirt got caught in the roller brush and now it won't spin.


... Eureka 12 Amp Capture Vacuum Upright Vacuum

The performance indicator light keeps going on. I've changed the bad and filter...any other suggestions?


It is probably clogged somewhere, if i was to guess check the hose. ... Kenmore Vacuums

Performance Indicator light on


This usually means a clog in the system or a clogged bag or filter. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

The performance indicator light will not go out. I have cleaned the bag, filter and hose. there does not seem to be enough suction.


You are clogged somewhere ... \015\012\015\012no suction? \015\012performance indicator says no suction?\015\012\015\012find and remove the clog.\015\012\015\012id be looking in the hose about 4 inches from ... Vacuums

Performance Indicator light comes on - Kenmore Vacuums


Something is clogged.. a coat hanger will get it out from hose.. make a small hook on the end, stick it in and fish it out.. probably where it is .. drop something in it like a quarter and if it dont fall through.. there is a clog.. also check the ... Kenmore Vacuums

Performance indicator I have a canister vacuum. I cleaned the filter and now the performance indicator is red, is it supposed to be red or green?


Put tape over it so u cannot see it ... Vacuums

My new beldray 1500w steam mop manual says ready to use when indicator light goes to green from red,there is no indicator light on it so how do i know when its ready to use?


... Vacuums

What is the performance indicator on kenmore progressive direcdrive intelliclean vacuum


... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Embedded dirt indicator light stays red


... Hoover U5491-900 Bagged Upright Vacuum

In the interest of saving electricity, is there any way to turn off all those annoying power indicator lights, charging lights, LEDs, etc? Like on the stove, microwave and nearly every other piece of electronic machinery ever made.I guess I want to know how much electricity are these things sucking over time? When I get up to use the bathroom at night it's a virtual light show!


Not much power is generated by those lights, I can assure you! Most LED bulbs are so small they only generate a fraction of money that a standard light bulb uses up. Especially if its just on household appliances. If you just switch them off at the m ... Black & Decker 15.6 Volt DustBuster Vacuum

The unit is charged, the charge indicator light is green, and the three lights on the top are lighted and steady but nothing happens. What am I doing wrong?


Press each cycle button and see if it starts up. I don't know if this is new and you just got it, but if so, you may need to remove any straps and retainers blocking the brushes etc. ... iRobot 4150 Roomba Vacuum

Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl


There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap ... Hoover Vacuums

Hi, last week I bought a new Henry vacuum with autosave, now the autosave feature is not working. The red indicator light does not light up and the motor does not change speed. Any ideas, other than returning to dealer?


Sadly you need to return to dealer, any problem contact Numatic (www.numatic.com), who supply it with a good 2 year warranty, which the dealer should support. This is a fault I see ... Numatic Henry Bagged Canister Vacuum

My kenmore whispertone has something called a performance indicator, what does it indicate? [email protected]


It indicates that the bag is full, or the filter is getting clogged. ... Kenmore 23313 Whispertone Bagged Canister Vacuum

I have a Palm Springs Ice Maker Model JS-ZBJ-10, and the Power Indicator Light blinks and tray does not fill up. I have had the water line clogged at one time and blew out the clogged line, but this is not the problem this time as I cleaned it and the light still blinks.


... Vacuums

How do I put the belt on the Kirby the correct way in order for the green light to come on? The green light indicates that the Kirby will pick up.


The G4 has a magnetic block on one end of the brush. It must be aligned on the LED end of the brush housing. ..with adjustment screws facing out. When setting the housing back in place use the pedal to lift the carpet nozzle up off the work surface ... Kirby G4 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0224 seconds