Having problems with your Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue ?

Kenmore 115 vaccum

\015 Dirt sensor location\015

Answers :

Repair Help & Product Troubleshooting for Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede


... Vacuums

My Kenmore Progressive Direct Drive Beltless System Vaccum cleaner is making a loud noise by the filter and hose in the back of the vaccum and is not picking up. I have cleaned the hoses and the bottom of the vaccum where the agitator is located. Still it is not picking up dirt. What can i do?


... Vacuums

I have a Kenmore bagless vaccum 12.0 amps I need help with get the canister off so it can be emptyed It is a upright vaccum.


Which model is it? ... Vacuums

Kenmore vaccum cleaner


Switch number is ... Vacuums

Need online manual for vaccum kenmore 116.25614506


... Vacuums

Kenmoore beltless vaccum brush wont turn - Kenmore 35912 / 35913 Progressive Upright Vacuum


... Kenmore 35912 / 35913 Progressive Upright Vacuum

Repair manual for model #116 kenmore vaccume


... Kenmore 23313 Whispertone Bagged Canister Vacuum

The cord is stuck on a Kenmore Elegance Vaccum. How do I get into the unit?


... Kenmore 22312 Bagged Canister Vacuum

I have a kenmore vaccum i changed the power cord for the powermate and still not working the model # 11652512202 it work for a second then stop working


Could be your off/on switch ... Kenmore 28614 Canister Vacuum

I have a kenmore vaccum i order a new part need help in removing the old part.


... Kenmore Vacuums

I need a manual for kenmore progressive 100 vaccum cleaner


... Vacuums

I need to change the retractable cord in a Kenmore Model 116.228.13204 vaccum but can't figure out how to remove the housing. I have removed the bag and the two screws but the top appears to be attached under the foot pedal. How do you release it. Does the foot release pop off somehow to reveal another screw in the back of the housing?


Go to this web site, it gives you complete schematics of your model. This will make it easier to see where all screws are and what you have to remove to get to reel. http://www.searspartsdirect.com/partsdirect Just enter your model # and complete bre ... Kenmore Vacuums

Have a kenmore cannister vaccum, brush is working but it is not picking up anything the suction is not working ?


Remove the hose and clear any obstruction from inside of it. If that does not work check the bag and filter if one is installed ... Vacuums

The vaccum cuts out replaced the wand but still having the same issue - the powermate head is fine and does not appear to be causing the problem. I have two Kenmore Progressive Canister Vacuum and this is happening on BOTH


... Kenmore 25512/ 25513 Progressive Canister Vacuum

My kenmore canster 116 does not come on. The wand action goes on but not the vaccum motor. Is there a reset switch for the motor.


No you can purchase a new motor on Ebay for as little as $30. This will solve your problem ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

I have a Kenmore canister 'hose 360 swivel' vaccum. It is very new; it is not self-propelling anymore, nor is it sucking. The brushes work great and are rotating just fine. Help!


... Kenmore 27814 Bagged Canister Vacuum

I need to put my kenmore vaccum back together I took apart the lower unit to get the roller it got gunky and all around the roller got gunky, Now it;s a bear to put back together


Remember the last thing you took off and start there,work your way in reverse towards the first thing you took off ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have the upright kenmore progressive with direct drive and the filter canister stops bringing in air and picking up when hose is put into vaccum, when you remove hose and use as an attachment it starts again


Check the hose after the brushes. With this problem there is normally a clog in between where you disconnect the hose (to use attachment) and the brushes that clean the carpet. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

I am trying to remove the motor in my Kenmore canister vaccum but cant seem to figure out how to get it out.


Without the model number, I don't know which model you have. But you can go sears.com, click on the parts link, then put in you completer model number, choose the cannister or main unit, a parts list and a picture diagram will come up, you maybe abl ... Kenmore 22812 Bagged Canister Vacuum

Central Vaccum - Kenmore Model No 34330


Is there suction where the pipe hooks to the cannister? If so, then are all of the outlets without suction? Maybe the hose is plugged. If the hose is ok, and there is suction at the cannister, then **** up a small **** of paper, one for each room ... Vacuums

DC07 DYSON REPLACEMENT HOSE. HOW DO YOU REMOVE IT FROM THE HANDLE. I have a kenmore whispertone 8540 canister vaccum. The electrical wires (3) to power the beater are embedded in the hose, in a spiral fashion. The yokes that hold the hose on both ends (and attach to the beater on one end and the unit on the other) have no screws or pressure latches; i don't want to use brute force as i may damage the attachment device inside the yoke. If someone can tell me the trick to get these yokes off each


Should be a pry off dot on the underside revealing a screw ... Vacuums

Kenmore progressive vaccum lost suction


HI, it's Jim from Crucial Vacuum!\012\012Here are some general vacuum maintenance tips that will help out with your Kenmore's loss of suction. After applying these solutions you should see an improvement in your vacuums suction. \012\ ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Brush does not turn on my vaccum


If there is no suction when you disconnect the beater bar assembly near the hand hold where you grab the vacuum, then there may be either a restriction in the vacuum line between there and the vacuum section (that rolls around behind you), or the vac ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore central vacuum doesn't turn on and has red light


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0224 seconds