Having problems with your Kenmore Vacuums ?

I have a Kenmore Canister Vac. I need to replace

\015 I have a Kenmore Canister Vac. I need to replace the swivel assembly on the power-mate floor attachment. How do I remove the old one?\015

Answers :

Try forcing a flathead screwdriver between the flange (tab) on the hose collar and the tab on the swivel assembly itself, taking care not to gouge the wires. Saw one solution where they used 2 screwdrivers simultaneously; couldn't do that, but did loosen one side at a time.
Repair Help & Product Troubleshooting for Kenmore Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede


... Vacuums

I have a Kenmore Canister Vac. I need to replace


Try forcing a flathead screwdriver between the flange (tab) on the hose collar and the tab on the swivel assembly itself, taking care not to gouge the wires. Saw one solution where they used 2 screwdrivers simultaneously; couldn't do that, but did lo ... Kenmore Vacuums

We have a Kenmore Grab-N-Go Upright Vacuum with a Hepa filter. We lost the yellow filter canister that goes in the top of the vacuum and need to replace it and the filter that goes in it. Is there somewhere we can purchase a replacement part?


... Kenmore 34722 Grab-N-Go Upright Vacuum

Need to replace motor brushes on Kenmore canister vacuum 116.25914503 - Getting lots of arcing at brush ends. Need tear-down steps to get at the brushes.


If you can see the arcing you are likely in the motor housing. The brushes are specific to the motor depending on RPM. Most brushes and motors in Sears units are supplied by AMTEK Lamb. The color on the plastic housing and stamped model # on motor w ... Vacuums

Need tp replace belt on Kenmore CB-3 - Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum


... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Need a replacement filter for my old Kenmore canister vacuum


... Kenmore Vacuums

Wiring the switch for a kenmore vacuum cleaner I need to know where teh different colored wires go. It had a short in it so I replaced the plug but think I wired it incorrectly. Its a Whispertone 300 model 116.28612790 The canister works but the beater bar doesn't.( it worked before a rewired the switch. Thanks


... Kenmore 23313 Whispertone Bagged Canister Vacuum

I need to replace the belt. how do i do it - Kenmore 22812 Bagged Canister Vacuum


Buy a manuel ... Kenmore 22812 Bagged Canister Vacuum

We have a kenmore canister vacuum, the part that is attached to the wand that picks up the dirt doesn't work, when it's on the carpet the light does not go on. Do we need to buy a new vacuum or is there a replacement for this part.


Hard to say without the correct model number.\015\012\015\012However, you could check these things first:\015\012\015\0121- Is the belt that runs the brushes on the end pieces broken? If it is, is needs to be replaced.\015\0122- Is there ... Kenmore Vacuums

I need a replacement manual - Kenmore 25512/ 25513 Progressive Canister Vacuum


If this is a panasonic or kenmore you can down load from the sears appliance web site and get what you need. ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a kenmore canister model number 116.2645083 I need a replacement motor. I was given 2 different numbers: 1. 4147248 2. AC92FAUX200 I can find the 2nd motor, but it doesnt have the 4 wires like the original one. Can you tell me if this is the right motor? Thanks Becky


Greetings from GoVcauum.com,\015\012\015\012Ok, so good news, I have looked up your model number for your Kenmore vacuum and found that your Kenhmore canister takes the motor ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Need to replace 8175251 cord - Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum


... Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum

I need to replace the vaacum belt and don't have a manual. Kenmore Canister


I need a manual for kenmore vacuum clearner #116 23812300 ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Motor needs to be replaced - Kenmore 23313 Whispertone Bagged Canister Vacuum


Are you sure its the motor and not a inline fuse or brushes? How did you conclude it's the motor? ... Kenmore 23313 Whispertone Bagged Canister Vacuum

I am replacing the hose on my kenmore canister 11622612200. i easily replaced the handle end of the hose, but cannot see how to replace the end that goes into the canister. can you tell me how to disassemble the canister end for the new hose? many thanks!


Open the canister and locate the hose intack. There is a plastic retainer which slides over the end of hose and is secured to the body of the canister with a few screws. Remove the screws and pull the retaining ring up to release the hos ... Vacuums

Need replacement bushing part number for Kenmore, or motor?


... Kenmore Vacuums

Kenmore 116.2481190 vac I need help with replacing the hose


... Kenmore 22812 Bagged Canister Vacuum

Kenmore Canister 116.20712007 replace power cord


... Kenmore 22612 Bagged Canister Vacuum

Replace hose on kenmore 3.9 canister vacuum - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Kenmore canister vacuum how to replace belt - Kenmore 22313 Bagged Canister Vacuum


... Kenmore 22313 Bagged Canister Vacuum

Kenmore canister vacuum cord reel replace - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum

KENMORE PROGRESSIVE CANISTER HEPA FILTER NEEDED


... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Need to replace power cord and can't find how to open canister to replace


I had the same problem and could not find the other screws. You need to pry off the power cord retraction button, you will find two more screws under there. It's pretty easy after that!!!! ... Kenmore 22612 Bagged Canister Vacuum

How to replace Kenmore canister vacuum filter.


I believe it faces toward the housing ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Need wiring diagram for Kenmore model #116 - Kenmore 25512/ 25513 Progressive Canister Vacuum


... Kenmore 25512/ 25513 Progressive Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0956 seconds