Having problems with your Kenmore Vacuums ?

What bags do I need for Progressive #116-226-12200?

Answers :

Repair Help & Product Troubleshooting for Kenmore Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover Alpina 2 1300 cleaner. I need to split the upper and lower casings to check that the switch is working. I have removed the screwa in the area around the bag, but now need to remove the switch and cable rewind covers, as I assume there are more securing screws under them. Can you advise how to do it please?

Move covers (forcibly !) away from the centreline of cleaner then move to rear until released. The covers are held by slide catches on inner edges. ... Vacuums

We have a Kenmore Progressive Model 116 Upright bagged vacuum with Hepa filter. It's at least a couple years old. For quite some time now when ever we use the vacuum the vacuum motor will shut off nafter about 5 min. of use. We then need to let it sit for awhile and then we can run it again for another 5 min. The bag has been change. Any one have any ideas how to fix this?

I suspect that you have a restriction. The motor sounds like the thermal break is stopping the motor before damage, due to heat.\012You must witness that the entire suction and discharge side are clear. This is not always very easy, but necessa ... Kenmore 34612 Bagged Upright Vacuum

I need a replacement reuseable cartridge filter for my genie shopvac sv300q (10 gallon) part number 23421r. I also need a 2 1/2 inch to 1 1/4 inch acessory adapter.

Look at the Big Box store for your parts ... ... Genie Company GV150 Wet/Dry Vacuum

Have bought a black ad decker band saw DN33 9 needs new drive belt but has 2 on parts list which 1 do i need

... Black & Decker Vacuums

Venturer iP873 clock radio Comes with 2 alarms, how do i turn off the second alarm when i only need 1 alarm? And on days i do not need the first alarm, how do i turn off both alarms all together?

Post in correct area for help. :) ... Vacuums

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n

... Vacuums

Eureka Model C2094-Type GW Vacuum 1 Bags-Belt- Beater Roller or bristles that go on roller-light bulb Vacuum 2 Bags-Belt-Beater Roller-Bulb-Plastic frame the motor bolts on-Metal holder the handle go in that lets the handle move up and down

... Eureka Vacuums

Kirby G3 I threw out my last bag for my kirby. I have an other model and now i dont know which type I need to get. I have 4 Style #2 bags but they are not the right ones... Help!

Beginning with the G series, G3 and G4 had round openings for the dirt intake. Prior models had oval so they will not fit, so find G3 or G4 bags and you will be set ... Kirby Generation 3 Bagged Upright Vacuum

I have a kenmore canister model number 116.2645083 I need a replacement motor. I was given 2 different numbers: 1. 4147248 2. AC92FAUX200 I can find the 2nd motor, but it doesnt have the 4 wires like the original one. Can you tell me if this is the right motor? Thanks Becky

Greetings from GoVcauum.com,\015\012\015\012Ok, so good news, I have looked up your model number for your Kenmore vacuum and found that your Kenhmore canister takes the motor ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I just purchased a deni 3500 to processe my deer meat. i stuff the 1 lb. game bags with sausage. to my supprize this machine is a #5 grinding head. where can i find a 2 in. stuffing tube to fit this grinder so that i will be able to stuff these bags ??

Hello. Here is the link to the parts you seek. http://www.thegourmetdepotco.com/store/store_manufacturer.asp?manufacturer=93 ... Vacuums

Clogged vacuum Rather stupidly, my boyfriend 1) were vacuuming without a bag and 2) vacuumed up a big piece of cotton from a sofa cushion. And now it's making a horrible noise and I see it vibrating where the tube connects to the machine. When you look inside there's a white thing sticking out but it looks like it's part of the vacuum. If it's a clog, how do you fix it? I tried unscrewing the tray the bag sits in but it won't budge.

You can start by taking off the bottom plate or top cover, which ever comes off, that is where the inlet starts going in and hopefully the clog is there. Could be in the hose also. But without the complete model number I can't look it up to see a p ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Need a belt for Pronto 2 in 1 stick vacuum.

Your not gonna find a belt because the belts on these units are not designed to be replaced by the consumer and would need to go to a service station ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne

It shows only 2 bars of performance. The suction is minimal. I don't see a blockage, the filter is cleaned and it has a new bag. The vacuum is eleven years old. Can it be fixed or do I need to replace it.

Depending on the brand of machine its a call you have to make . If it is a dept store machine I would recommend replacing it as the brushes in the motor are most likely worn out. Anyways I would go to local vacuum shop and inquire about a re furbish ... Kenmore 23313 Whispertone Bagged Canister Vacuum

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?

Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

I need to know how to clean the hose and dirty water tank. 1) does the bottom of the tank come off to clean the gunk off the walls 2) does the hose come off so it can be cleaned out?

Yes you can take off the tank and take apart...wash all parts.... ive done it ... Bissell THE BISSELL LITTLE GREEN MACHINE Vacuum

What bags do I need for Progressive #116-226-12200?

... Kenmore Vacuums

Need tp replace belt on Kenmore CB-3 - Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

Hello,I have iRobot Rooomba Discovery 4200 about 2 years,but I didn't use it about 1 year.Now I tried to use it again,but doesn't work.I charged it 16hours,the power was green,but after leaving home base again red lihgt on power and stopped to work.Do you think that I need to replace battery?Thank you

The Roomba's batteries are made to be in constant use. It is more likely that the battery cells are dried up. You will need to replace the battery. ... iRobot Roomba 4210 Bagless Robotic Vacuum

The hose is disconnected, new bag in unit, new filter, unit runs when hose is detached but immediately turns off when hose is attached but hose has no obstruction, etc.. i was told i need some sort of valve. HELP! I have birds, a cat and 2 large dogs and no vacuum :)

There is a vacuum hose that attaches inside the unit to a round clear plactic piece. In most cases you can simply cut the small vacuum hose and it will fix the problem. ... Electrolux Epic 3500 Vacuum

D.d vaccum i have a dirt devil dynamite...i bought a new for it i put it on and not even 1 minute of using it the belt broke again!!!!i dont know whats going on do i have 2 put it on a certain way does it need grease or what!

Did you check the brush roll, if the ends aren't turning freely, then it needs to be replaced also. ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

NEED NEW BATERIES ON MY 2 IN 1 PRONTO - Electrolux Vacuums

Check for a recall on those stick vacs , just google electrolux recall and youll find it. ... Electrolux Vacuums

1. The lid is ceacked in the rihet cormer 2, the air does not completly exit the bag before the machine starts irs vacuum cycle.

Buy some 5 min epoxy at walmart and repair the crack but follow the directions ... Vacuums

Battery needs to be replaced in eletrolux pronto 2 in 1 stick vacum,can i order one

The battery replacement for the PRONTO is not a consumer level maintenance procedure.\012\012However, I just replaced the 4 original EMX1600sS batteries by anotther \012model with the same specs and my PRONTO is working fine now. The battery\01 ... Electrolux Vacuums

I just bought a Danby Premiere air conditioner #317826. I need a newset of tubing, as it is messed up. I would really appreciate it, my name & address is Sammie Visage, Rt 1 box 171, Carter, OK 73627. When I visited my sister in TN, she showed me hers and I was impressed, so bought one. I live in Western OK in a town of 300, A Lowes store is 2 1/2 hours from us. So you can see why I would really appreciate your help. Thank you, Sammie Visage

... Vacuums

The inner pot's coating for anti-sticking is chipping off now for the pressure cooker model number 22027 sensio Inc and it looks like we need to order another innerpot of the pressure cooker. 1) we are wondering whether we can get the contact informaiton to get this done 2) could we also get stanless inner pot? Julie change [email protected]

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0797 seconds