Having problems with your Kirby G10D Vacuum ?

Wont power on - Kirby G10D Vacuum

Answers :

See the diagram and follow according with your common sense. God bless you
Repair Help & Product Troubleshooting for Kirby G10D Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Wont power on - Kirby G10D Vacuum

See the diagram and follow according with your common sense. God bless you ... Kirby G10D Vacuum

Kirby G10D wont power on

Head or bag system not fitted correctly refit both ... Kirby G5 Bagged Upright Vacuum

My Kirby vacuum wont power on

Check for power at your brushes, possible worn brushes in the motor ... Kirby G6 Bagged Upright Vacuum

My Kirby G 2001 upright vacuum wont turn on. I tried another outlet and still nothing. I don't see a breaker switch anywhere. If you know of any common problems I would love to hear them. I am very mechanically inclined, I just was wondering if there are any common issues with the motors or power switches etc. so I don't waste a lot of time troubleshooting. Thanks

This might sound a bit silly but check to see if the cord is plugged into the machine correctly if it is check to see if the safety interlocks are all engaged. ... Vacuums

Kirby sentria wont power up - Vacuums

... Vacuums

Kirby vacuum I have a G 6 kirby vacuum. The power cord has been checked and has continutity and replaced the power switch and the vacuum will still not run

There are 2 safety switchs, one on the front that the nozzle activates, and one on the side that the bag asembly activates. The motor brushes and/or armature maybe bad. ... Kirby Ultimate G Bagged Upright Vacuum

The kirby wont start no power

... Kirby G6 Bagged Upright Vacuum

I have a Series G Kirby Model G7D. The other day when I was vacuuming all of a sudden the TechDrive (Power Drive Assist N/D) pedal fell off. I see the hole that it goes into but when I put it in it's loose and falls out and doesn't control the power drive anymore. When I shook the vacuum I heard something rattling around inside the vacuum head. So I unscrewed the bottom and looked inside and found a small metal part labeled K3 on one side and T on the other side. It looks like it would fit

Hi, I have a Kirby G4 and i'v replaced the carbon brushes myself using a step by step guide however since its been back together it worked for about five minutes it then started sparking from the inside!!(a lot!!) I'v obviously touched something i sh ... Kirby Ultimate G Bagged Upright Vacuum

Kirby g10d manual - Kirby G10D Vacuum

... Kirby G10D Vacuum

We bought our Kirby less than 5 years ago and lately are not happy with it....it keeps breaking. The warranty has expired and our biggest complaint is that it has lost it's suction power. All the contents stay in the hose when I vacuum out the car or upholstery and it does vacuum well at all. The Kirby store quoted us over $200 to fix/ service it. Apparently this is not covered in the free yearly maintenance which we just had done. Any suggestions?

\012 Hi there,\012Well I do have a suggestion though you may not like it use it as a boat anchor.....no no I am just kidding. I have sold vacuums for 20 years and Kirby has b ... Kirby Ultimate G Bagged Upright Vacuum

I have a Eureka Upright vacuum (4800 Series). When I try to start it by turning the switch on, it wont. For few days, I was able to get around this problem by repeatedly turning the switch on and off until it turned on but that does not work any more. Could it be something related to the switch it self or the power cable. My wife mentioned that one of my kids might have pulled the power cable too hard (at the back of the vacuum). Any help to solve this problem will be very much appreciated. Tha

... Eureka Smartvac 4870 Bagged Upright Vacuum

Green light on power nozzle of Kirby vacuum, Model G7D

The green light is just to inform you that the brushroll is spinning. there is a magnet on the brushroll that makes the green light come on every time it rotates. also why it looks like the light flickers because the magnet only makes contact once pe ... Kirby Ultimate G Bagged Upright Vacuum

Hi. I borrowed my friend's Hoover VC340 to clean my house. I was vacuuming when i noticed the cannister was full, so I turned the vacuum off, pulled out the barrell, and followed the instructions on the barrell to empty it. I put it back into the machine, but it wont turn back on. I tried different power outlets, but to no avail. any thoughts?

... Vacuums

I am looking for a contol board for a miele s143 stick vacuum. The vacuum wont start but when I supply power directly to the motor it spins. I think the switches are OK so I have concluded it is the control board Thanks Don Kenney

You should check the cord and switch's for continuity, the boards are usually pretty reliable, you could check the board for any bad solder joints, at least that would be obvious. ... Vacuums

I changed the hepa filter on my rainbow vacuum and now the vacuum wont power on. What do I do next?

Did you remove the Baffle Plate Asm at any point? If so, it is possible that the ... Rainbow E series Canister Wet/Dry Vacuum

WHAT YEAR WAS THE KIRBY G10D MADE - Kirby Ultimate G Bagged Upright Vacuum

... Kirby Ultimate G Bagged Upright Vacuum

No power kirby sentria wont power up no sound or light nothing

There should be an onboard fuse for the Kirby vacuums. Look on the bottom of the motor. Hope this helps. ... Kirby Ultimate G Bagged Upright Vacuum

My kirby wont start - Kirby Vacuums

Check the plug,then check the switch. ... Kirby Vacuums

110-220V Dear Sir, I purchased a kirby sentria vacuum cleaner from ebau two weeks ago. I currently resid in the UAE with 220V power. My maid has plugged the vacuum to work with it unaware of the voltage difference, a terrble noise as mentioned came from the cleaner as well as a smell. She unlugged it and stopped t from operating. Can you please let me know how can i assess the damage? If this model has a switch from 110 to 220V IS there a solution with transfromer or motor to make it work? Thank

You may have burnt up the motor field when it was plugged into a 220V power source. But there are drop down transformers you can get to reduce the voltage form 210 to 110. AS Radio Shack or similar store would have them. ... Kirby G4 Bagged Upright Vacuum

I currently own a kirby heritage II, and love the cleaning power it has, but....it is becoming harder and harder for me to manuever it, do to arthritis. Are the newer kirby's any easier? If so, how much? If not, what vacuum would you recommend for me?

If you are good and familiar with a Kirby, the new generations are self propelled with a transmission BUT may cost you over $1500 US. They will be very familiar but easier to push, yet still vastly overpriced. You might want to look for a deal ... Kirby G4 Bagged Upright Vacuum

Vacuum has no power - Kirby Ultimate G Bagged Upright Vacuum

... Kirby Ultimate G Bagged Upright Vacuum

Tray wont stay connected to kirby - Kirby Ultimate G Bagged Upright Vacuum

Here is a guide for the shampooer...follow it exactly and it should help. Please remember to rate it if it's helpful! :0)\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Lately, my Kirby Ultimate G has been acting funny. When I push it forward, it's fine, but when I pull it backward on the carpet, the light on the front flickers and the power flutters off an on. I thought it might be the rollers, so tonight I turned the machine over and pulled out the hair that was wrapped around the roller. However, that did not fix the problem. I should probably backtrack a little bit. In the past, I have had problems with the vacuum running over its own power cord.

The cord will need to be replaced with a cord made for the machine, as it has a non-standard plug. The cord cover is held in place with a # 20 Torx screw. Remove the screw and push the cover gently from behind to unlatch it. The handle must also be r ... Kirby Ultimate G Bagged Upright Vacuum

Kirby heritage ii power light comes on but front light and vacuum not working

... Kirby Heritage II Vacuum

The ultimate g series kirby vacuum,,the spinner wont attach to the head?

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0736 seconds