Having problems with your Kirby G4 Bagged Upright Vacuum ?

How do I change my kirby g4 to sweep/mop mode?

\015 I have had my kirby for about 13 years. I have lost my manual and can't remember how to change the attachments around to sweep and mop my kitchen floors. Could you please explain how to do this?\015

Answers :

Turn the belt lifter to red arrows matching to sweep the kitchen floor. This stops the brushroll from turning and allows you to use straight suction. There is a hard floor pad available...see the link to my guide and you may find one for sale...
\015\012As for mopping...I just dump a small bit of soapy water on the floor and run my Kirby shampooer (with no solution in the tank) on the lowest setting to scrub, then I dry mop behind it to pick up the excess water. There really are no instructions in the manual for scrubbing linoleum, but I just improvised. It splashes a bit, but better than getting down on hands and knees. Here is a guide to hook up the shampooer...
\015\012Hope this helps a bit...
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change my kirby g4 to sweep/mop mode?

Turn the belt lifter to red arrows matching to sweep the kitchen floor. This stops the brushroll from turning and allows you to use straight suction. There is a hard floor pad available...see the link to my guide and you may find one for sale... ... Kirby G4 Bagged Upright Vacuum

I have a model F602-900 and it show it is in the tool mode. How do I get it to change to the floor Mode?

... Hoover F6020-900 SteamVac Upright Vacuum

Dyson 23 Animal keeps putting itself in floor mode, when I press the button to change to carpet it turns itself back to floor mode

Make it impossible for it to turn back into flor mode ... Vacuums

Hello can you help me please? I have a Kirby G4 vacuum cleaner, It did work ok until it started to give off burning smell and lots of sparks from the brushes. I have changed these brushes, the motor still rotates but it still gives off sparks and burning smell. Do i have to change the motor as well? Can you help please? Thankyou Martin

Some debris, even sand or dirt, probably got into the motor, causing damage to the armature. If this is the case, you will need to replace the motor. The burning smell from the motor is generally a sure sign of a bad motor. ... Kirby G4 Bagged Upright Vacuum

Hello, Could you send me an exploded view of an engine kirby please? My Kirby vacuum cleaner I think for 1997 I think it is garnet, having wanted to change the coals, I do not know the back, is the cause of my request, I contacted a person previously in Bastogne (Belgium) several times which promised to help me but in vain, I count on your good will so I can reassemble it and use it again. In advance, thank you

Try this site out:www.onlinevacshop.com/kirby-G5-parts-manual.phpGood Luck!Jim ... Kirby G5 Bagged Upright Vacuum

Firex smoke alarm keeps sounding in a loud piercing tone. put it in hush mode and after it leaves hush mode it takes about 5-10 minutes and starts sounding again. have change batteries and cleaned units with canned air.

... Vacuums

My Ultronic clock is set to 24-hour clock mode. How do I change to 12-hour clock mode?

... Vacuums

I've got a Kenmore canister vacuum, Progressive 236123, and there's a burning smell from the belt side of the head--smells a lot like hot rubber. I've cleaned the agitator and changed the belt, but I still get the smell. It's stronger when I'm using "carpet" mode than when I'm using "bare floor" mode. Any ideas what the problem is?

... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

How to change belt on kirby heritage 2? - Kirby Heritage II Vacuum

... Kirby Heritage II Vacuum

How do i change my belt on the kirby g6 - Kirby G6 Bagged Upright Vacuum

Hello,For detailed, step by step instructions (with pictures):http://www.goodvac.com/articles.asp?id=143Hope this helps! Ple ... Kirby G6 Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum

I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

How to belt change on kirby clasic III - Kirby Vacuums

... Kirby Vacuums

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.

... Kirby G6 Bagged Upright Vacuum

I purchased the Sharp Ultra-Thin Digital Alarm Clock Today. SPC431A The first one I bought the digits did not show up on the right side of the clock. I went and exchanged it for another, after showing the store what was wrong with it. I have now been able to set most all of it, but... 1) It is on 24 hr mode, instead of AM or PM. The instructions that I have do not say anything about a 24 hr mode. I have tried running through the clocks hours, to see if that would change it back to AM or P

... Vacuums

Kirby how do you change the bag on a kirby heritage 1hd? also what kind of bags do you use?the vacuum was given to me and it works great,but i do not have a book on it.

Kirby style 2 bags if it is indeed a bagged unit, some where special order with what is called a shake out bag, if your outer bag has a short zipper with a cloth pocket it is a shake out bag in which you take the assembly loose from the machine and o ... Vacuums

How do i switch the kirby into blower mode? - Kirby Vacuums

Remove the bag by twisting the plastic "emtor' on the bottom of bag to remove from outlet. put hose onto outlet by twisting in opposite direction. jim ... Kirby Vacuums

How to change the fan in kirby heritage 2 - Kirby Heritage II Vacuum

This site has a great tutorial on how to do it. I did it myself and it worked out great. Get the parts online or at your ... Kirby Heritage II Vacuum

Kirby G4D belt change . haven't changed the belt in years ! not sure who it goes on, or around the the spool housing ??

Changing belt on Kirby is a bit complicated. Kirby Co. just did not make it easy for their customers. You have to be careful when installing the brush roll back. Brush roll end caps have to be put back a certain way. For detailed instructions with pi ... Kirby G4 Bagged Upright Vacuum

Kirby vacuum stuck in drive mode - Kirby Vacuums

... Kirby Vacuums

Need to change electrical cord on g5 kirby - Kirby G5 Bagged Upright Vacuum

This should be fairly easy to do. With the cord unplugged, take the screw out that it holding the hard plastic cord cover onto the base of the machine. This is where the cord looks like it's going into the bottom of the machine. The next part is a bi ... Kirby G5 Bagged Upright Vacuum

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum. Can't find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.

\015\012Vacuuming Liquids\015\0121. When picking up small amounts of liquid\015\012the filter may be left in place.\015\0122. When picking up large amounts of liquid\015\012we recommend that the filter be\015\012r ... Craftsman 17765 Canister Wet/Dry Vacuum

I have a Hoover steam vac Model #F5865-900. I am unable to have the cleaning mode change from tools to floor when lowering the handle release. I hear a click, but the indicator stays on tool. I need to know how to get to the assembly that controls the cleaning mode.

... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I tried to program my Toshiba TV Model 27A43 to a new Universal Remote, because the original Toshiba remote was functioning more+more slowly ( I changed batteries on the original Toshiba remote first) After programing the TV Mode on the new universal remote sucessfully I tried to program the DVD Mode on the new universal remote. After that all our 83 cable- channels are mixed up in their numbers. The numbers only show up to 69 and not to 82 like before. Channels 7-17 show only weak and snowy r

... Vacuums

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum

... Kirby Heritage II Vacuum

I have Kirby sentria that shuts off while using the rug attachment and won't start until I change to the hose attachment. I have had it in Kirby repair store 5 times, cord replaced. Took it back t

*power cord\012*power switch\012but most likely it is the black switches on the fan shroud. These are the safety switches that prevent the vacuum from turning on. ... Kirby Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0576 seconds