Having problems with your Kirby G4 Bagged Upright Vacuum ?

I need help to take my unit apart to remove the impeller. It is broken. The video is too dark and soft spoken to follow disassembly instructions.


Answers :

On the bottom you will see 2 levers that slide to the side.turn those and the head should come off.there should also be a knob on the top to disengage the belt.once you get the head off you will be at the motor and you will see the impeller.you will have to take the motor housing apart to replace it though.the impeller should be held on with a nut in the middle
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need help to take my unit apart to remove the impeller. It is broken. The video is too dark and soft spoken to follow disassembly instructions.


On the bottom you will see 2 levers that slide to the side.turn those and the head should come off.there should also be a knob on the top to disengage the belt.once you get the head off you will be at the motor and you will see the impeller.you will ... Kirby G4 Bagged Upright Vacuum

Poor cleaning I recently bought the Shark Steam Mop as I read mainly fantastic reviews. I was disappointed to find that it leaves a slight film on my dark hardwood floors when finished. I can wipe the film away with my finger and you can see foot prints if walked over. I also found that there are cloth streaks on my ceramic floors after drying as well. I followed all instructions, vacuumed beforehand, used distilled water even though my water is not considered hard, cleaned slowly, etc. I am wo


Hi,This type of problem usually is not he fault of the Shark Steam Mop.The problem is the old residue left on the floors by other cleaners.Here is a tip that I wrote that will help you out with that problem... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I can't fix the meat grinder the main body of my new Kenwood Cooking Chef..following the instructions but can't get it to click into place. I was hoping maybe there was a video showing me how to attach it? Thanks.


... Vacuums

Disassemble Instructions for Bissell 8975 needed


... Bissell 8975 CleanView Bagless Upright Vacuum

I purchased a Bissell ProDry Cleaner from HSN on July 16, 2009 and followed the instructions on assembling such, however our carpets had been professionally cleaned so my wife stashed it in a rear closet . . . and forgot about it! So now we have a beautiful machine that has never been turned on but . . .no instructions on how to use it . . . HELP! Roger Hoagland 5031 Coringa Drive Los Angeles, CA 90042 323/255-5266


... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

We had to take the machine apart just to see that the belt had broken after only 5 use's . We can not see how we are ever going to put the new belt back on. do you have instructions on how to take the belt off and how to put a new one on? Please send me one.


I have a Panasonic MC-V5746 upright vacuum. According to the booklet, \015\012MAKE SURE UNIT IS UNPLUGGED.\015\0121. Place carpet-bare floor selector in "carpet" position.\015\0122. Remove lower plate (there are two screws in the m ... Vacuums

There is no suction from the sweeper head but plenty from the wand. I have viewed several videos and visited seveal dyson web pages and none address this problem. I have thoroughly checked for blockage per video instructions. There were NO BLOCKAGES. Please help. Thanks Doug


Hi Doug,\015\012\015\012There are several things that this could be. Probably the most common problem that we see when customers come in with this problem is actually a fairly simple problem to fix. Here are just a few things that this co ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I want to disassemble a canister vac model #5561209 for cleaning. Vacuum bottom plate says to check manual for instruction. Can't find manual for instructions...:)


I can't find the manual for that model number. Here's the Kenmore site with most of their models.\015\012Double check the number, and type it into the given space. Again, that model number comes up blank. Googling it also provides no hit. ... Kenmore Vacuums

I have a Singer 2259 sewing machine which has an automatic needle threader. There is a diagram in the instruction manual of how to use this threader, but I can't seem to follow it properly and can't get it to work. Are there any clearer diagrams you could point me to, or clearer instructions? I'd appreciate your help.


Singer 2259 doesnot have automatic needle threader ... Singer Vacuums

My mother purchased a replacement hose assembly for a Bissell ProHeat 2X and the part was shipped without any instructions... While I am pretty handy, my issue is with the supply tube, and I cant figure out how to accomplish the replacement, and as its not MY vacuum, Im hesitant to start taking things apart.I just need instructions to replace the entire hose assembly.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Attempting to thread 1409 Singer Promise for the first time. Instructions say to "pass the thread through the slotted eye of the take-up lever". The take-up lever does not stick out of the machine casing at any time. How do I do this? Thnk you for any help you can give me. Kathy


I have this problem too, I think it's a design fault. Used mine last night for first time and I managed to get the thread thru by placing the lever at the very top of its arch. Then I used the handwheel to bring it downwards and used tweezers to pull ... Vacuums

Need instruction to disassemble Hoover F7425-900


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Need video or large diagram instructions for what to put together


Before using steam mop, vacuum up or run dust mop over floors to release all loose dust and debris. Notice if anything like tar or stuck on food that sticks up a bit from floor and remove. (The stea, mop can clean surface drips but not something tha ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Shark professional steam mop disassembly instructions


... Euro-Pro Vacuums

Had to take bissell 8910 completely apart, need reassemble instructions


... Bissell ProHeat Pet Upright Deep Cleaner, Purple, 89104

Hi. I borrowed my friend's Hoover VC340 to clean my house. I was vacuuming when i noticed the cannister was full, so I turned the vacuum off, pulled out the barrell, and followed the instructions on the barrell to empty it. I put it back into the machine, but it wont turn back on. I tried different power outlets, but to no avail. any thoughts?


... Vacuums

I require the Old hose handle/end plug disassemble instruction for a Kenmore Whispertone model 116.20600001c


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=575171\015\012Generic problem for all Vacuums\015\012I require the Old hose\015\012Posted by hrabed on May 06, 2 ... Vacuums

Floor Mate Need to find REPAIR, not owners manual for hoover floormate spinscrub 810 for disassembly instructions


There is a black shaft with a black circular arm at a right angle to the shaft. The black plastic arm that sticks out of the front ( farthest away from the hinge) of the roller assembly plugs into the circular arm so that moving the scrub/vacuum slid ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Looking for someone to instruct me on how to take apart my hoover steam vac so that I can check for clogging. It just stopped extracting water from the rug everything else sounds fine. The return holder is in place and has been checked many times. Any help?


First remove the dirty water tank then turn the unit on if your facing the front there is a duct on the right where the tank sets there should be a black seal around it if you have suction there then you will need to check the tank ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

Unit does not spray water for deep cleaning. One can hear the motor running of the ''spray'' action, but no water comes out. I have followed the DVD instructions exactly. Please advise Thanks Anne


Sounds like you have an air lock in line before motor. turn unit upside down and disconect hoses. reconnect and try again with plain water. good luck ... Vacuums

I have a bissell proheatX2. it has quit spraying to the floor and out of upholstery hose. I contacted bissell who won't do anything, they refered me to a repair shop which told me i need to take the heater out of handle and unclog it. How do i do this, is there a disassembly proceedure?


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Belt problem My belt broke. I put a new belt in, followed the instructions, seemed to be right but as I started using the vaccuum, it starting smelling like burnt rubber. The belt was extremely hot. Took it apart, tried again and the same thing happened. Please help me!!!!


Get the old lady to use a dustpan and brush instead SORTED ... Kirby Generation 3 Bagged Upright Vacuum

Battery replacement I tried to follow the owner's manual instructions, but I have been unable to remove the battery cover.


I have opened CHV1400 by removing two screws that are visible when you remove the "accessory" from its holder (located underside of the vacuum). After removing the 2 screws, I had to pull the green colored part by exerting slight force. You will now ... Black & Decker CHV1400 Bagless Handheld Cyclonic Vacuum

Roomba Discovery My Roomba turns on and moves but the brushes won't turn. Someone told me that I had forgotten to put in the yellow and black end bearings, but I did. Help, I miss my Roomba I have a Roomba 530, I have had it for 2 weeks and really loved it. I have followed all the cleaning instructions etc.. Then the Roomba wanted it's brushes cleaning "please clean Roombas brushes" So thinking that something was stuck I removed and cleaned the brushes, (yellow tabs on and in place by the way)


I read somewhere that you need to clear the software in case there is a glitch. To do this, take the battery out and then, simultaneously hold down the "spot" and "clean" buttons for 30 seconds. Replace battery. This has worked for my Discovery model ... Roomba Robotic Floor Bagless Vacuum

Hoover Model S3281, disassembly instructions


GET TO THE REEL AS FOLLOWS:\015\012 \015\012(BEFORE YOU START, BE SURE TO UNPLUG THE DIMENSION FROM THE OUTLET)\015\012 \015\0121). TURN VACUUM OVER ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0411 seconds