Having problems with your Kirby G4 Bagged Upright Vacuum ?

Replace Kirby legend II fan (impeller blade) - Kirby G4 Bagged Upright Vacuum


Answers :

In order to replace the fan you will buy a 2 or three piece lexan fan kit containing the fan a spacer and shaft.
You must remove the carpet head and then looking from the back of the machine you will find a series of philips screws on the outer edge of the fan housing facing towards the front, several of which may be partly covered by the motor housing. You will remove the forward facing screws to allow the housing to separate and reveal the fan.
If you are lucky there will be a sideways hole through the impeller shaft allowing you to slip a nail through to help twist the saft to unscrew it while holding the fan .
The shaft will turn off revealing a threaded motor shaft with spacers which the broken fan will slide off revealing a second spacer at the back . Be sure to replace these spacers in the same order when re-assembling the unit. Secure the shaft hand tight. Post back to advise if you need further help
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replace Kirby legend II fan (impeller blade) - Kirby G4 Bagged Upright Vacuum


In order to replace the fan you will buy a 2 or three piece lexan fan kit containing the fan a spacer and shaft. You must remove the carpet head and then looking from the back of the machine you will find a series of philips screws on the oute ... Kirby G4 Bagged Upright Vacuum

Replace fan blade e77491 - Kirby Generation 3 Bagged Upright Vacuum


KIRBY VACUUM REPAIR HOW TO REPLACE THE FAN IMPELLER ... Kirby Generation 3 Bagged Upright Vacuum

No manual, want to replace fan Impeller - Kirby G4 Bagged Upright Vacuum


Hi,\015\012 Here is their instructional video....click below\015\012http://www.kirby.com/Portals/0/videos.html\015\012\015\012 He ... Kirby G4 Bagged Upright Vacuum

I have a Sanitaire model SC886 upright vacuum. It's about a year old. I replaced the belt , cleaned bag , checked for blockage in impeller fan and now it makes a noise , like a grinding noise or something . Could you tell me how to fix it ?


The bearings in the motor needs to be checked,or the impeller is damage. ... Eureka SC886 Bagged Upright Vacuum

Replace fan impeller on Kirby Legend II - Vacuums


Take to repair shop u have have the tools needed to replace ... Vacuums

How do Ii change the fan impeller - Kirby Ultimate G Bagged Upright Vacuum


There's a good video on youtube on this.\015\012\015\012http://www.youtube.com/watch?v=dhIoSRs2R4M&feature=player_embedded#! ... Kirby Ultimate G Bagged Upright Vacuum

Fan blade cracked - Kirby G4 Bagged Upright Vacuum


It needs replaced before it breaks and pieces get into the motor.\015\012Replacement instructions can be found at http://www.ehow.co ... Kirby G4 Bagged Upright Vacuum

Kirby g6- How do you replace the cord? - Kirby Generation 3 Bagged Upright Vacuum


I do believe o6 the cord goes in to the metal housing of the motor .They are usually held in by a rubber grommet and they can with some patience and force be pulled out slowly does it as you don't want the wires ... Kirby Generation 3 Bagged Upright Vacuum

Not sucking i have a KIRBY G3 that was working great. One day there was a strong smell and the brush roller belt broke so I replaced it. The fan looks good. Now the vacuum does not **** up dirt but instead seems to very gently blow air forward. I took the (new) bag off and it is blowing hard int the bag. I am stumped!


Belt is not connect to the drive pulley, see manual for fitting or see utube for video ... Kirby Generation 3 Bagged Upright Vacuum

How to install Kirby g4 fan - Kirby Generation 3 Bagged Upright Vacuum


It needs to be stripped completly down, if you are confident at doing this then here goes.\015\012It has been a while for me so take your time and some of the steps may have to be completed slightly differently.\015\012Isolate / unplug t ... Kirby Generation 3 Bagged Upright Vacuum

I need to replace my belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Hello, amhillI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ... Kirby G4 Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

How do you replace belt on a Kirby G5 - Kirby G5 Bagged Upright Vacuum


Hi there SmartAlec from NelsonVacuums.com.au here. I was going to write an explaination on how to do it when i cam across this great video clip of how to do it on youtube. ... Kirby G5 Bagged Upright Vacuum

I need to replace the fan blades on a Kirby Heritage II, Model 2HD, vacuum cleaner. How do I remove the drive shaft that the fan is mounted on? Thanks, Robert Croft


... Vacuums

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

Change fan unit - Kirby G4 Bagged Upright Vacuum


Here is a free online manual. The fan is also available for purchase. :0)\015\012\015\012http ... Kirby G4 Bagged Upright Vacuum

How do i remove the fan - Kirby G4 Bagged Upright Vacuum


Hello, stacyI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would t ... Kirby G4 Bagged Upright Vacuum

I wish to purchase a 11-blade fan part for my "Legend ii" Kirby vacuum cleaner. Reply to: Richatrd at [email protected] Phone 073788621 Taupo


Contact www.stevessewandvac.com via email they will be able to help you with the fan. ... Kirby Vacuums

How to replace a fan on kirby g4 vaccum - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Cant get the suction impellar off to replace - Kirby Generation 3 Bagged Upright Vacuum


Shaft has to be spun clockwise. It has reversed thread. If this is not the problem but you just need to somehow hold the field - see instructions HERE. You may ... Kirby Generation 3 Bagged Upright Vacuum

How do I replace the hose - Kirby G4 Bagged Upright Vacuum


Witch hose do you mean ? here is fill tube hose video ... Kirby G4 Bagged Upright Vacuum

How do i replace the belt - Kirby G6 Bagged Upright Vacuum


Hello,Check this out, it should help:http://www.goodvac.com/articles.asp?id=143Good luck,Rocky ... Kirby G6 Bagged Upright Vacuum

I think my fan belt lever is on backwards - Kirby G5 Bagged Upright Vacuum


... Kirby G5 Bagged Upright Vacuum

I need topknow how to replace the belt - Kirby G4 Bagged Upright Vacuum


The following link lead to the Kirby site, which has an excellent instruction video for replacing the belt. Just click on one of the symbols to the right of "Changing the Belt". If you don't have either of these video viewers, you can download one at ... Kirby G4 Bagged Upright Vacuum

Need info on replacing on/off switch - Kirby Ultimate G Bagged Upright Vacuum


Here's my free online guide to replacing the power switch....\015\012\015\012http://revie ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1064 seconds