Having problems with your Kirby G4 Bagged Upright Vacuum ?

I need to remove the outer bag from my Kirby upright. The inner bag was not attached and there is mung everywhere.


Answers :

In order to remove the outer jacket from your Kirby do the following.
\015\012Detach the top bag clip from the handle support. There is a plastic piece, just below the outer jacket, called the mini emptor. Turn it to the right to remove the entire bag assembly. Removing the outer jacket is dificult and even harder to put back on so this is what I would do.
\015\012Unzip the outer jacket as you were going to change the bag. Remove the paper bag. You will then see a long black tube, that has a 90 degree elbow at the top. That elbow is attached to the inside of the bag with a snap type strap. Remove the strap, then you will be able to move the tube, while you clean out the inside of the bag. When finished put everything back where it was.
No there is a zip like strap the attaches the bag to the mini emptior that is what I believe she is asking how to remove the zip tie like belt holing the outer bag to the small canister. I am having the same issue and dont want to have to replace parts
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to remove the outer bag from my Kirby upright. The inner bag was not attached and there is mung everywhere.


In order to remove the outer jacket from your Kirby do the following.\015\012Detach the top bag clip from the handle support. There is a plastic piece, just below the outer jacket, called the mini emptor. Turn it to the right to remove the enti ... Kirby G4 Bagged Upright Vacuum

I cant get my kirby to blow out...bag is removed from seating...its plugged in...i attach the hose to the place where the bag goes, but it wont run


I did get it to work! It was a struggle, but It finally hit that hidden switch just right. The hose attaches to where the bag goes, and it just wouldnt seat properly. I suppose there might be some wear there on the hose end that twists in . ... Kirby Vacuums

Kirby Ultimate G Diamond edition vacuum. We were told you can wash the outer bag. Is that true? How do you remove the bag to do this?


Twist the bag emptor left to remove it from the upright then your need a sharp narrow pointy object (like a metal dental pick cost $1 in most stores) push it under the plastic band around the rubber on the bottom of the cloth bag roll it across and t ... Kirby Ultimate G Bagged Upright Vacuum

Have a Kirby Heritage II vacuum. Need to replace a split fill tube. How do I remove the outer cloth bag from the mini-emptor, and then how do I take off the old/attach a new fill tube?


This repair guide should answer all of your questions...http://reviews.ebay.com/HOW-TO-REPLACE-REPAIR-KIRBY-VACUUM-H ... Kirby Heritage II Vacuum

I would really like to wash the outer bag of my vacuum, but I have a problem. I can remove the outer bag from the vacuum, but the plastic 'frame' that is inside the outer bag is sewn to the bag. So what am I supposed to do about that if I want to put it in the washing machine? I have the Oreck XL Silver.


Hi, you can wash the bag. However you cannot wash the bag in the wash machine. What you will want to do is look for the screw or depending on the model, untwist the cap down on the rod next to the machine. that entire pole section will co ... Oreck XL2000 Bagged Upright Vacuum

How do I remove the outer bag from my Oreck XL2 upright


... Vacuums

Removal of Outer Bag for washing


Here is a link to my guide for cleaning the Kirby cloth bag...\015\012\015\012 \015\012\015\012 ... Kirby G5 Bagged Upright Vacuum

Hi, I have a Dirt Devil Model # M08100REDC. I desperately need to change the bag, but I don't see an obvious way to do it. I'm afraid to try pulling on the cloth tab thingy that's just below the handle, between the rubber ring that holds the bag on the vac, because it seems like stuff will fly everywhere from the force required to remove it, and I might not be able to get it back on there. Should I just pull on that cloth tab until the bag comes off? Thanks, Roberta


You can pull on the tab to remove the bag, but probably a better way is to gently pull on the rubber ring that attaches the bag to the back of the vacuum body. If you don't yank and ****, it should come off without spilling the dirt. There may also b ... Dirt Devil Classic M08100 Bagged Handheld Vacuum

I just notice when I went to change bag in my Kirby G4 that the whose inside was split open, which made all the dust fill up in the bag. How do I get a replacement part for this and what is that part called. Do I need to buy the whole outer bag?


You do not need a whole bag. The bag fill tube is replaceable. can be temp fixed with duct tape and new one installed at home. vacuum inside with another vac and you will be set to replace ... Kirby G4 Bagged Upright Vacuum

I have a HSCU800B upright. The bag slipped off and the contents is inside all over the cloth bag. I need to remove the outer cloth bag in order to get it clean. How can I do that?


... Hoover Vacuums

How do i attach new outer bag to top of heritage handle


... Vacuums

How to remove bag on kirby classic omega to empty it


DEODORIZING CLEANING THE KIRBY VACUUM OUTER CLOTH BAG ... Kirby Vacuums

I have a Miele Vacuum cleaner MedicAir 5000 Plus. Recently the Dust Bag Indicator bar is full during normal cleaning and consequently the suction power is much less. I replaced the dust bag, engine pre-filter and Hepa filter but no change. When i remove the hose, the Indicator is normal, but when i attach the hose, wand, head, the indicator is full. I checked the hose, wand, head but can't see any blockage and when i blow with my mouth it seems fine. Can anybody help? thanks!


... Miele Vacuums

How do i attach the shampooer to my g6 kirby - Kirby G6 Bagged Upright Vacuum


Greetings,\015\012\015\012Here's an easy to understand and follow video review on how to attach the carpet shampooer to the Kirby Generation 6 (G6). The model that's being used in this video is a little newer model, the Sentria, but the ... Kirby G6 Bagged Upright Vacuum

I need to change the retractable cord in a Kenmore Model 116.228.13204 vaccum but can't figure out how to remove the housing. I have removed the bag and the two screws but the top appears to be attached under the foot pedal. How do you release it. Does the foot release pop off somehow to reveal another screw in the back of the housing?


Go to this web site, it gives you complete schematics of your model. This will make it easier to see where all screws are and what you have to remove to get to reel. http://www.searspartsdirect.com/partsdirect Just enter your model # and complete bre ... Kenmore Vacuums

Kirby will only work with hose attachment - Kirby G4 Bagged Upright Vacuum


... Kirby G4 Bagged Upright Vacuum

How do u remove the bag to make it a shampoo - Kirby Ultimate G Bagged Upright Vacuum


You can unclip the bag at the top where it attaches just below the handle. The base of the bag actually turns and screw off. Turn the bag outward and lift off. Then fill the shampoo attachment and screw it on just as the bag screwed off. But make sur ... Kirby Ultimate G Bagged Upright Vacuum

How do you remove a Kirby Dual Santronic 80 cloth bag?


... Vacuums

How do I use the Upholstery attachment? - Kirby Ultimate G Bagged Upright Vacuum


Using canister attachments HERE.If you have in mind "How to SHAMPOO upholstery" then go ... Kirby Ultimate G Bagged Upright Vacuum

How do i remove the fan - Kirby G4 Bagged Upright Vacuum


Hello, stacyI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would t ... Kirby G4 Bagged Upright Vacuum

How do I use the attachments? - Kirby G5 Bagged Upright Vacuum


The rug head must be replaced with the hose assembly. Raise the head to it's highest position with the foot pedal. Turn the belt lifter fully counterclockwise to disengage the belt, and unlatch the head to remove it. The hose then sits on the mountin ... Kirby G5 Bagged Upright Vacuum

Can't get the bag attachment off my Kirby to use the shampooer.


You have to twist the bag attachment counterclockwise to release it. Then put the shampooer on opposite from that. Line up the arrows when putting attachments on. ... Kirby Ultimate G Bagged Upright Vacuum

How do you remove outer bag for cleanin/ - Oreck XL2600 Vacuum


... Oreck XL2600 Vacuum

How to attach shampoo components - Kirby Ultimate G Bagged Upright Vacuum


Here's a link to my free online guide...\015\012\015\012http://reviews.ebay.com/KIRBY-CARPE ... Kirby Ultimate G Bagged Upright Vacuum

I am using a Kirby Hertigae II shampoo attachment and the belt broke, I am trying to replace the belt, but cannot remove the bottom brush that the belt hooks onto.


Try using a pair of pliers on each side to remove the screws you only need to remove 1 ... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0594 seconds