Having problems with your Kirby G4 Bagged Upright Vacuum ?

Kirby Suction and Blower Connector

\015 I broke the suction and blower connector (Generation 4) and was wondering if I can disconnect the part and put a new one on without having to replace the hose as well.\015

Answers :

Yes you can. The end of the hose that mates with the suction/blower is flexible. You can use a pair of needle nose pliers to compress the hose end and force it out of the suction/blower connector.
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby Suction and Blower Connector


Yes you can. The end of the hose that mates with the suction/blower is flexible. You can use a pair of needle nose pliers to compress the hose end and force it out of the suction/blower connector. ... Kirby G4 Bagged Upright Vacuum

Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.


If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It ... Kirby Generation 3 Bagged Upright Vacuum

Kirby sentria I have a kirby and the belt is on, however it has very little suction. I am unsure what to do.


You have to make sure the green light is on.. in the corner .. and if it is that means its working properly. If you have no suction then it is usually the belt and or the bag. so make sure your bag is not full , make sure everything is attatched pro ... Kirby Ultimate G Bagged Upright Vacuum

My Kirby Ultimate G does not have enough suction to pick up pet hair. Is there anyway this can be corrected? I felt under the vacuum when it was running, the roller is running, but I felt very little suction.


An Ultimate G has lots of suction. If you turn on your vacuum and the bag immediately inflates - that is how you can tell if your Kirby is moving air (suction). There is a more modern brush that came out with the Ultimate G Diamond and the Sentria ... Kirby Ultimate G Bagged Upright Vacuum

How do i switch the kirby into blower mode? - Kirby Vacuums


Remove the bag by twisting the plastic "emtor' on the bottom of bag to remove from outlet. put hose onto outlet by twisting in opposite direction. jim ... Kirby Vacuums

Kirby sentria does not have suction - Kirby Sentria 192006 Power Cord


... Kirby Sentria 192006 Power Cord

My Kirby vacuum is a G100 upright. It has no suction. It has been cleaned and the bag is empty (new bag). My mother-in-law bought the same kind and hers is doing the same thing. It has no suction and won't pick up anything. Thank you, Rachel Souza - [email protected]


... Kirby Vacuums

Losing suction filter clean,hoses clear,output blower good,but very poor suction


If the blower is much stronger than the suction, you may have an air leakwhere the cover fits on tank or possibly a warped tank or cover. feel all around the unit for air being drawn in somewhere besides the hose. try it without the hose on and block ... Craftsman 17765 Canister Wet/Dry Vacuum

We bought our Kirby less than 5 years ago and lately are not happy with it....it keeps breaking. The warranty has expired and our biggest complaint is that it has lost it's suction power. All the contents stay in the hose when I vacuum out the car or upholstery and it does vacuum well at all. The Kirby store quoted us over $200 to fix/ service it. Apparently this is not covered in the free yearly maintenance which we just had done. Any suggestions?


\012 Hi there,\012Well I do have a suggestion though you may not like it use it as a boat anchor.....no no I am just kidding. I have sold vacuums for 20 years and Kirby has b ... Kirby Ultimate G Bagged Upright Vacuum

Kirby My Kirby is less than a year old.  It's suction is no longer strong. I tried cleaning the hose and even replacing the bag.  Do you have any other suggestions.  By the way, I have the Sentera model.  Thank You


Here is a link to my online troubleshooting guide. Hope it helps...\015\012\015\012http://r ... Kirby Generation 3 Bagged Upright Vacuum

Hi -- I have a Kirby Sentria and it is great except that I am getting no suction at all through the big silver power head. Suction through all the other attachments works well. I haev tried it with the roller belt on and off, and that doesn't seem to make a difference. Am I missing something?? Thanks!


You can take off the power head and look in that whole where the belt is and see if there is a paper towel or something in there clogging it up. Also tug on the belt and make sure it is tight - because if it is loose it is broken and you ... Kirby Vacuums

I have a Kirby G series diamond edition. There seems to be no suction when I turn on the vaccum. The bag inflates, but the roller does not turn. It has a new belt and the roller brush is clean. Any suggestion on what I might do to increase the suction and get the roller bar moving?


THE IMPELLER LOOKS SHOT.. 25 QUID FOR NEW ONE,,LIFT THE LID AND TURN THE ROUND PIN AND CHECK FOR RIDGES ROUND THE WHITE IMPELLER,,IF NONE THERE THATS IT,, HAPPEND TO ME TEN MINS TO FIX GEORGE ... Kirby Ultimate G Bagged Upright Vacuum

Not very good suction on my kirby g6d


Change the bag? Change the Belt? Check the brush roller. It's one of those three 99% of the time. ... Kirby G6 Bagged Upright Vacuum

My kirby has no suction


Even if you have a new belt, do everything this guide tells you to do. The seller may have the power nozzle assembled improperly. If the brushroll is in wrong or the base plate is not on correctly, it may cause these symptoms.\015\012\015 ... Kirby G6 Bagged Upright Vacuum

How do i improve suction on my Kirby g upright


... Kirby Ultimate G Bagged Upright Vacuum

Kirby Low Suction


Have you checked the fan? It is what creates the suction. If ok, then you may have a motor problem, sometimes they run but not up to speed, then suction is lowered when that happens. ... Vacuums

Kirby G 6 but it only blows air out, no suction. Also how do you detach the cloth bag to wash it?


I have the solution for the cloth bag laundering process...\015\012\015\012Here is a link to my guide for cleaning the Kirby cloth bag...\015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

I need to know how to change my kirby into a blower?


Raise the light assessory on the front of the vac. Remove the roller assembly by rotating the square dial as indicated by the arrows. Then you must attach the accessory that sort of looks like a 4 inch square open box to the front of the vac where ... Kirby G4 Bagged Upright Vacuum

Kirby G4 will not suction the dirt up.


There are a couple reasons this could be happening, there could be a clog in the fill tube which is the black tube that is inside the cloth zippered bag, the tube you attach the bag to. Or there could be an issue with the fan, which to check it you n ... Kirby G4 Bagged Upright Vacuum

No suction on kirby g4 upright vacuum. Can't use attchments.


First remove the mini-emptor and check for a clog also check the fan for anything cloging that or the hose may be clogged ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G6 without suction


The power head light flickers when the brushroll is temporarily not spinning. You may need a new belt and/or a new brushroll. As for the unusual sound, you may need to replace the fan. See my troubleshooting guide and from there, you can view my so i ... Kirby G6 Bagged Upright Vacuum

Kirby G4 without suction


Change your belt, if there is suction from the hose, and you cant see any blockages in the area where the brush roll is then you need to change the belt, even if it isnt broken. putting your hand over the nozzle to feel the suction is not the way to ... Kirby Ultimate G Bagged Upright Vacuum

My Kirby Generation 3 has no suction at all


Check for a clog by removing the bag mini emptor (plastic bottom of the bag) twist it off by rotating it away from the vacuum ... Panasonic MC-V7355 Upright Vacuum

Kirby g5 suction problem


If its not picking up as an upright but does with the hose, youve either not connected the belt or the belt is broken ... Kirby G5 Bagged Upright Vacuum

The suction on the Kirby Ultimate g is very weak


You probably have a small leak somewhere. it doesn't take much to lose suction. make sure everything is sealed between the vac and bag and make sure there's not a small hole in the bag. the impeller should be alright unless, you've vacuumed up someth ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0422 seconds