Having problems with your Kirby G4 Bagged Upright Vacuum ?

What years were the Kirby G-4 produced? - Kirby G4 Bagged Upright Vacuum


Answers :

Hello, rbrooks

I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about vacuumcleaners and possibly yours, from
repair to trouble shooting it. http://home.howstuffworks.com/vacuum-cleaner.htm

Please if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.

Thanks, Mike


Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What years were the Kirby G-4 produced? - Kirby G4 Bagged Upright Vacuum


Hello, rbrooksI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ... Kirby G4 Bagged Upright Vacuum

WHAT YEAR WAS THE KIRBY G10D MADE - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

We have a Kenmore Progressive Model 116 Upright bagged vacuum with Hepa filter. It's at least a couple years old. For quite some time now when ever we use the vacuum the vacuum motor will shut off nafter about 5 min. of use. We then need to let it sit for awhile and then we can run it again for another 5 min. The bag has been change. Any one have any ideas how to fix this?


I suspect that you have a restriction. The motor sounds like the thermal break is stopping the motor before damage, due to heat.\012You must witness that the entire suction and discharge side are clear. This is not always very easy, but necessa ... Kenmore 34612 Bagged Upright Vacuum

My vacuum kirby turned by itself - Kirby Generation 3 Bagged Upright Vacuum


The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you! ... Kirby Generation 3 Bagged Upright Vacuum

Kirby Vacuum Serial Number 439345 - Kirby G4 Bagged Upright Vacuum


... Kirby G4 Bagged Upright Vacuum

How do i clean the chromr on kirby g4 vacuum - Kirby G4 Bagged Upright Vacuum


The Kirby is polished aluminum. It is best cleaned with mag wheel polish, and lots of "elbow grease". ... Kirby G4 Bagged Upright Vacuum

Fix kirby vacuum - Kirby G4 Bagged Upright Vacuum


See your local kirby agent for service ... Kirby G4 Bagged Upright Vacuum

How to set up kirby to vacuum mattress - Kirby Generation 3 Bagged Upright Vacuum


Detach lower end of bag from body of vacuum.\015\012Attach hose to the opening.\015\012Attach above floor tool for vacuuming.\015\012\015\012See video instructions on below site.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

Kirby g3 upright will not pick up trash - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

Kirby skips while vacuuming carpet - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby G4 Vacuum Cleaner - MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I've had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This


Hello,\015\012My educated guess is that it's either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair...\015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

I need an instruction manual for my Kirby - Kirby G5 Bagged Upright Vacuum


Good vac. com has instructions for kirbys for free there are other sites as well but it will take you to sit down and do the research. a lot of people will charge you so since just about any instruction manuel is free online you should probably go th ... Kirby G5 Bagged Upright Vacuum

Lost a wheel for my kirby vac - Kirby G4 Bagged Upright Vacuum


Call uk systems on 08005420029 they are a main agent for kirby for spares and repairs ... Kirby G4 Bagged Upright Vacuum

How do i use the kirby shampooer - Kirby Ultimate G Bagged Upright Vacuum


Hi,\015\012I'ts a little fiddly - but pretty good when it gets going.\015\012Remove bag from bottom connection by swinging outwards untill it clicks - then remove upwards. Unclip at the top also.\015\012Undo belt by rotating centre ... Kirby Ultimate G Bagged Upright Vacuum

My kirby sentria isnt picking up - Kirby G6 Bagged Upright Vacuum


HiYouve either got a broken belt in the main head or youve not connected it when you put it back on the machineRob ... Kirby G6 Bagged Upright Vacuum

How do i repair a burned out kirby g5 motor? - Kirby G5 Bagged Upright Vacuum


... Kirby G5 Bagged Upright Vacuum

Need to change electrical cord on g5 kirby - Kirby G5 Bagged Upright Vacuum


This should be fairly easy to do. With the cord unplugged, take the screw out that it holding the hard plastic cord cover onto the base of the machine. This is where the cord looks like it's going into the bottom of the machine. The next part is a bi ... Kirby G5 Bagged Upright Vacuum

How do i put the belt on my kirby sentra - Kirby G6 Bagged Upright Vacuum


See my previous detailed posts for a Generation 5 and follow step by step. ... Kirby G6 Bagged Upright Vacuum

My kirby won't turn on - Kirby Ultimate G Bagged Upright Vacuum


Check your cord,maybe you have to replace it,they do sale replacements. ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G4 Bagged Upright Vacuum When in upright position it automatically switches off.


Make sure that everything is latched and closed, also make sure it is even on the floor (also "lock" anything that needs to be-i had the same prob, so many things to check!) ... Kirby G4 Bagged Upright Vacuum

I need a shampooer tank for a kirby G six. - Kirby G6 Bagged Upright Vacuum


You can purchase one from www.acevacuums.com ... Kirby G6 Bagged Upright Vacuum

How to install Kirby g4 fan - Kirby Generation 3 Bagged Upright Vacuum


It needs to be stripped completly down, if you are confident at doing this then here goes.\015\012It has been a while for me so take your time and some of the steps may have to be completed slightly differently.\015\012Isolate / unplug t ... Kirby Generation 3 Bagged Upright Vacuum

How to use the kirby sentria atttachments - Kirby G6 Bagged Upright Vacuum


You can get instruction manuals on DVD, VHS or book format by clicking this link,... ... Kirby G6 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0914 seconds