Having problems with your Kirby G4 Bagged Upright Vacuum ?

Not turning on when plugged in - Kirby G4 Bagged Upright Vacuum


Answers :

Check the fuse under the cover of the beater bar.
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not turning on when plugged in - Kirby G4 Bagged Upright Vacuum


Check the fuse under the cover of the beater bar. ... Kirby G4 Bagged Upright Vacuum

My vacuum kirby turned by itself - Kirby Generation 3 Bagged Upright Vacuum


The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you! ... Kirby Generation 3 Bagged Upright Vacuum

Cant turn the bag connect to get it off - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

My kirby will not turn on - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

My kirby won't turn on - Kirby Ultimate G Bagged Upright Vacuum


Check your cord,maybe you have to replace it,they do sale replacements. ... Kirby Ultimate G Bagged Upright Vacuum

My kirby will not turn on - Kirby Ultimate G Bagged Upright Vacuum


YOU NEED TO CHECK THE WIRE, SAFETY SWITCHES & POWER SWITCH, ONE OF THEM HAVE PROBLEM ... Kirby Ultimate G Bagged Upright Vacuum

My kirby will not turn on - Kirby Ultimate G Bagged Upright Vacuum


The kirby won't trun on if everything is not completely in place all the way. Check the vacuum bag position (the outer bag), make sure it is clicked in on the bottom, also check that the head of the vacuum is installed properly. Check your power uppl ... Kirby Ultimate G Bagged Upright Vacuum

I cannot get my beater bar to turn - Kirby G4 Bagged Upright Vacuum


Manual on how to attach the nozzle - HERE. Or you may watch the video on the bottom of the home page on goodvac.comGood luck,Rocky ... Kirby G4 Bagged Upright Vacuum

Roller won't turn - Kirby Ultimate G Bagged Upright Vacuum


This is most likely due to a broken belt. See following site for an instructional video for replacing the belt.\015\012\015\012http://www.kirby.com/Port ... Kirby Ultimate G Bagged Upright Vacuum

Will not turn on when plugged in - Sebo X4 Bagged Upright Vacuum


Hi There,So when this light is displaying, it's says "Bag Full or Clog" on the indicator. If you have changed the bag, and it's still showing this light, it means that you either have a clog in the vacuum, or your filters are dirty, which ... Sebo X4 Bagged Upright Vacuum

Will not turn on - Kirby Ultimate G Bagged Upright Vacuum


Make syre that both safety switches are engaged. See the instructions here:\015\012http://www.goodvac.com/articles.asp?id=137#1.2.1\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

The brush won't turn. - Kirby G4 Bagged Upright Vacuum


Are you certain the belt attached as it ws suppose to when you locked the front onto the base? ... Kirby G4 Bagged Upright Vacuum

I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn't fall on the floor, it's sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being


Even though the brush is spinning, you probably need to replace the belt because it is s ... Eureka Vacuums

Won't start. My son was using the vacuum & Didn't change the bag. The vacuum was making the full bag smell, but the light was't on & it didn't stop. I stopped him, changed the bag, checked the filter, closed the compartments & turned on the vacuum. Nothing happened. I checked to be sure that it was plugged in, that wasn't the problem. I've let the vacuum "rest" for several days, It still won't start. Any suggestions?


There is a reset button at the back of the powerhead. The user manual can be downloaded from the electrolux website, although I didn't find it very useful. There was some info on how to change the powerhead drive belt. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have a Kirby G4 Vacuum Cleaner - MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I've had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This


Hello,\015\012My educated guess is that it's either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair...\015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

Kirby Vacuum Serial Number 439345 - Kirby G4 Bagged Upright Vacuum


... Kirby G4 Bagged Upright Vacuum

Kirby skips while vacuuming carpet - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

Kirby g3 upright will not pick up trash - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Fix kirby vacuum - Kirby G4 Bagged Upright Vacuum


See your local kirby agent for service ... Kirby G4 Bagged Upright Vacuum

Vacuum dead I have oreck XLx2 bagged upright - the belt ,plug and cord have been replaced - has been working great - now went to plug it in and it does not work - the light goes on in the on/off switch so power is working but vacuum is dead - any suggestions


If the cord coming from the bottom up to the handle is loose, and is a plug, push it in. If that doesn't help. then could be a problem with the motor. One other thing to check is inside the handle, maybe a wire came loose. ... Oreck XL2200 Bagged Upright Vacuum

How to set up kirby to vacuum mattress - Kirby Generation 3 Bagged Upright Vacuum


Detach lower end of bag from body of vacuum.\015\012Attach hose to the opening.\015\012Attach above floor tool for vacuuming.\015\012\015\012See video instructions on below site.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

How do i clean the chromr on kirby g4 vacuum - Kirby G4 Bagged Upright Vacuum


The Kirby is polished aluminum. It is best cleaned with mag wheel polish, and lots of "elbow grease". ... Kirby G4 Bagged Upright Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

When i turn on the vacuum it shuts right off. the speckled bag light is on (2 lights under the plug light)


Im going to guess you have an Electrolux Tank. the control valve inside probably went bad. normally i just disconnect it. Do no try to take it apart if you don't know what your doing. take it to a vacuum shop. ... Electrolux Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1307 seconds