Having problems with your Kirby G4 Bagged Upright Vacuum ?
Kirby G4 will not start
\015 Worked fine the last time I used it but now...nothing when I turn it on. I checked to make sure everything was connected well but still nothing.\015
I have published an eBay guide...it may be of help to you. Just click on the link to view it.\015\012\015\012
Check the mains socket with something else.
Repair Help & Product Troubleshooting for Kirby G4 Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The kirby wont start no power
... Kirby G6 Bagged Upright Vacuum
I just bought a 2nd hand Kirby & not really know how to start. it didn't come with any operation Manual or CD. I realized its a re-po set. I think its Kirby Ultimate G Bagged Upright Vacuum, as there is nothing to identify it.
Here's a free guide for the shampoo system and I have both book and DVD manuals available for purchase. Hope i've helped...\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum
I have Kirby sentria that shuts off while using the rug attachment and won't start until I change to the hose attachment. I have had it in Kirby repair store 5 times, cord replaced. Took it back t
*power cord\012*power switch\012but most likely it is the black switches on the fan shroud. These are the safety switches that prevent the vacuum from turning on. ... Kirby Vacuums
Brush turning slowly while shampooing. It starts out fast, but after a minute or 2 the brush is not spinning very fast. I have powered it off and let it cool down. I just started out so I can't believe the engine is over heating, just doing 2 rooms, can't even get through the first room. If I take the brush attachment off, then put it back on and then turn it on, it spins fast, but after a a few minutes, it's spinning softly/slowly again. Kirby diamond edition
Track not set properly in grooves\015\012there could be a clog or the cleaner has built in feature to slow down heads for better cleaning this does it on its own ... Vacuums
My Kirby Heritage II vacuum is not picking up dirt up out of the carpet like usual, and I have to keep setting it lower to pick anything up. I finally get it to such a low setting that it starts sucking the carpet up and makes a whirring noise, and starts smelling. Every time this happens, we find the belt has been burned. We are wondering if the brush roll inside with the brushes that pick up dirt are worn out and too short?
... Kirby Heritage II Vacuum
Kirby Sentria I just got done usting the carpet shampoo system and now my Kirby wont start
When you replace the outer bag assembly, you have to make sure that it is turned clockwise untill it fully stops. There is a small switch on body of the Kirby that is only engaged when the bag assembly is installed correctly ... Kirby Ultimate G Bagged Upright Vacuum
My kirby wont start - Kirby Vacuums
Check the plug,then check the switch. ... Kirby Vacuums
Our Kirby G5D won't start. - Kirby G5 Bagged Upright Vacuum
Make sure that both safety switches( in front and the bag are) are engaged. To see the video how to correctly attach the nozzle and bag go to:\015\012 http://www.goodvac.com ... Kirby G5 Bagged Upright Vacuum
Thank you for the detailed explanation regarding the kirby vacuum functions, but we would like more information about the exact shampooing instructions. in explanation we would like to know exactly what solution and in what quantity to apply first to the fabric... how long we need to let it soak in.... and how to remove the stains using only our kirby vacuum witjh shampoo attatchment from start to finish...
... Kirby Ultimate G Bagged Upright Vacuum
Kirby Sentria Hi, I have a new Sentria & used it for the first time today. It was going fine & then I could smell smoke & it started to make a loud noise so I turned it off quickly. If I turn it on it immediately starts making the noise again & I can see it is all lit up inside like something is burning or sparking. I have checked the roller & it is moving & I have checked the fan which is moving & doesn't appear to be damaged in anyway. This product is from the US & we are in the UK & we are us
Sounds like the motor burned up. not sure if travel adapters will handle a large load like a motor, around 8 or amps. power needs in US are 110 volts ac, 60 hertz.I believe UK is 220 volts and 50 hertz. usually when a vac is brought to eu ... Kirby Vacuums
I have a Kirby Dual Sanitronic '50' Vacuum Cleaner I bought in 1966. The motor does not start when I attach the belt lifter of the rug nozzle. When I remove the rug nozzle and detach the belt from the motor fan shaft the motor starts when I depress the nozzle switch and the power switch . Seems like the brushes in the motor are worn out. I do not have a manual for this unit. Can you assist me as to what newer unit is this compatible to and the problem I'm having at present??
... Kirby Vacuums
Kirby Legend 2 wont start
... Kirby Vacuums
My Kirby G5 will not start. Head not aligned?
Check the positioning of the roller (it's got numbers 1 2 3 at each end, make sure it's on the same number at both ends).\015\012\015\012Just a thought too - check your power lead at the machine end as due to the age it may have deteriora ... Kirby G5 Bagged Upright Vacuum
I was shampooing my carpet when I bumped my kirby agiest the wall a few times it shut off and won't start again.
When you bumped it, it probaly kocked the nozzle out of place triggering the safety switches preventing power to the Kirby Ultimate G. Take the shampooer off and put it back on ... Kirby Ultimate G Bagged Upright Vacuum
Kirby sentria wont start
My kirby shuts off while in use, starts again when cool
Sounds like the brushes are going bad on the motor ... Kirby Ultimate G Bagged Upright Vacuum
Kirby G4 won't start
When putting on belt and brush housing are u makeing sure the switch on the main housing is being engaged when putting on brush housing to main frame of Vacume ... Kirby G4 Bagged Upright Vacuum
Gen 3 model Kirby vaccuum won't start
Checked your bag if they are full, if bagless check your filter. If still not working maybe the protected temperature fuse blown out. You need to open it and replace the protected blown fuse. ... Vacuums
I have a Kirby G7 and it will run on the low speed setting. When i switch to the high speed it starts to spark and smoke near the back of the motor near the windings. Do i have a motor going bad or is there a simpler fix.
It's probably doing that on low speed too, you just aren't noticing. What you'll have to do is get to the motor. Look at the armature and see if it's scared, missing an pieces, scratched up.. if so, then your motor is shot, throw it away.. If not, if ... Vacuums
I just bought an older Kirby and it vacuums beautiful but when I put the shapooer attachment on the motor won't start. The light comes on so I know I have juice. Is there another switch for the shamooer?
There are two safety switches that must be engaged. One where the vacuum bag and shampooing tank are placed. And the other in the very front where hose, upright nozzle, and shampooing tray is attach ... Kirby Ultimate G Bagged Upright Vacuum
Plug in kirby vac to do the floors and it won't start.
It could be the power cord or even the switch. I suggest taking it to an authorized Kirby repairshop and have it looked at. It could be something as simple the power switch ... Kirby G6 Bagged Upright Vacuum
Kirby G3A Attempts to start but wont run
Http://www.ebay.com/gds/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING-/10000000003800312/g.html ... Kirby Generation 3 Bagged Upright Vacuum
Kirby G5 vacuum.....machine started turning on and off depending on the position of the handle. Now it will not turn on at all----help anyone
Your cord is bad up on the handle where the swiveling strain relief. ... Kirby G5 Bagged Upright Vacuum
My kirby legend II started spitting out sparks near the foot plug. How can I fix it please? Thanks Candy
Depends where the sparks are spitting from.Unplug from the wall and try to detach the cord from the vac itself, where it plugs in. If there is a small hole burned in the side you will need to detach the entire cord from the handle where it clamps on ... Vacuums
I just replaced the belt on my Kirby Heritage II, and it keeps coming off. It is engaged when I check it, but as soon as I start vacuuming, it comes off?!
You got the wrong size. ... Kirby Heritage II Vacuum