Having problems with your Kirby G5 Bagged Upright Vacuum ?

G5 kirby's drive feature isn't working

\015 Kirby works good, but is hard to push.......the direct drive feature isn't working. The lever seems to work, but nothing changes when you switch to the drive option.\015

Answers :

A gear set and drive belt are not that expensive and easy to install. You can find them here
\012
\012GoodVac.com
\012www.goodvac.com
\0121-800-775-6586
The gears or the drive is probably worn down or is broken.take it into kirby and they can fix it for you.
Repair Help & Product Troubleshooting for Kirby G5 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

G5 kirby's drive feature isn't working


A gear set and drive belt are not that expensive and easy to install. You can find them here \012\0 ... Kirby G5 Bagged Upright Vacuum

I have kirby k5 it will not go into the drive .I took it apart and the shaft that put it into drive 'had fell out.Not sure how to get it in the rightway to make it go from nut. to drive Are therea parts page you can email so i can see how it works thanks john [email protected]


... Kirby Vacuums

Kirby sentria drive function not working


... Vacuums

The self propelled feature does not work. Belts are OK but the drive wheels do not seem to be engaging. Is there a cable or something from the lever on the handle that needs to be replaced?


My vacuum cleaner does not turn on \015\012could it be the motor out \015\012i check the switch it ok not getting any power to the switch ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Kirby drive gear not working


You will need a new cam bracket, contact your local kirby agent ... Kirby Ultimate G Bagged Upright Vacuum

Gear lever the drive / neutral lever gas come out of the back of my kirby upright diamond edition vacuum cleaner and also the foot on/off power switch is now NOT working either. I am in Maroochydore. Queensland. Australia. 4558


Http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM?ugid=10000000003752018 ... Kirby G6 Bagged Upright Vacuum

G5 Kirby. Works in Neutral fine. When Drive is engaged and I push forward, the wheels do not rotate forwards, however on the pullback stroke the wheels rotate backwards. What causes this? Something is clearly in the wrong position, so a diagram showing the correct position of the part that is affected would be useful.


Hello, anjeI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

Self propelled feature does not work. I replaced


There is a cable from the handle down to the transmission on this machine that breaks all the time or the cable is mounted to a plastic piece that is broken. That will need to be replaced. ... Hoover U6476-910 WindTunnel Upright Vacuum Cleaner Bagged Vacuum

Kirby g3 tech drive


So when u pull it back it's like it's not engaged at all? then it maybe the reverse is out....with the fwd soon to follow. remember the vac is 20yrs old; & working that long? it definately served it's purpose.\015\012depending how much mo ... Kirby Generation 3 Bagged Upright Vacuum

Drive mechansism won't engage Kirby g6


... Kirby G6 Bagged Upright Vacuum

When kirby sentria is put in drive it goes backwards


... Vacuums

Kirby g7d wont go into tech drive


... Kirby G5 Bagged Upright Vacuum

Kirby g10 clicks in drive


... Kirby Ultimate G Bagged Upright Vacuum

After using switch to go from floor to carpet, noticed the roller brush not working, and therefore the self-propelled feature also not working. Replaced what I thought was the problem, a loose belt, but still does not work. Motor runs and there is suction...???


... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

We have a Eurolab XR210 Robotic Vacuum, it has stopped working. The fan will run, but the wheels do not drive, the UV light does not work, however, it will work in Docking mode. Can it be fixed?


... Vacuums

Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use


If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum

The headlight on my Kirby doesn't work!


A few problems exist in this situation.\015\012A. Is the bulb you put in a genuine kirby part?\015\012If not it is probally not the correct anperage.\015\012B. Are the little medal pieces on the end lined up correctly? If not adjust ... Kirby Generation 3 Bagged Upright Vacuum

My Eureka Endeavor power paw is not working, there is no debris in it and the belt is secured. Why isnt it working


... Vacuums

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?


Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

I am hoping my Kirby Sentra has a reset button. It is only 5 months old and it will not turn on.It worked a couple hours ago. The vacuum will work with the hose attachment but not with the roller.


... Vacuums

Kirby g6 My kirby is running louder than usual. Kind of like its screaming instead of running now. Its working fine, but the noise is really unbearable. What could it be?


Could be the bearings, especially if the machine is old or the dust filters have not been replaced regularly.\015\012Check to see if the noise is still present after the machine winds down when the power is turned off. A rattling sounds means b ... Kirby G6 Bagged Upright Vacuum

The drive stopped working while shampooing; I believe a moisture problem. Will a hair dryer work?


Hello, sharpI\012 was trying to help you out here. Maybe this will help some? I was going\012 back to some customers that asked questions in the recent past and even\012 farther back. It appeared that no one answered some of them, So ... Kirby G4 Bagged Upright Vacuum

My kirby sentria won't go into drive - Kirby G5 Bagged Upright Vacuum


... Kirby G5 Bagged Upright Vacuum

Does power drive wheels work both in forward and reverse and if they dont what is the solution? mine seems to work only in reverse??


The drive transmission works in both directions. If they do not, then the metal cable connection (under the hood) that connects the handlle grip to the transmission, may be slightly out of center adjustment. ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

My kirby sentria isnt picking up - Kirby G6 Bagged Upright Vacuum


HiYouve either got a broken belt in the main head or youve not connected it when you put it back on the machineRob ... Kirby G6 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0437 seconds