Having problems with your Kirby G5 Bagged Upright Vacuum ?

Need to change electrical cord on g5 kirby - Kirby G5 Bagged Upright Vacuum


Answers :

This should be fairly easy to do. With the cord unplugged, take the screw out that it holding the hard plastic cord cover onto the base of the machine. This is where the cord looks like it's going into the bottom of the machine. The next part is a bit tricky. The hard plastic piece holding the cord in can be popped out with a flat head screw driver. On each side of the cover pop the tip of the screw driver into the side and gently pull to the side. Do this on both sides of the cover and it should come right off.
The cord should just pull out.

Put the new cord in, pop the plastic cover back on, and put the screw back in.

Let me know if you need more help.

:)
Repair Help & Product Troubleshooting for Kirby G5 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to change electrical cord on g5 kirby - Kirby G5 Bagged Upright Vacuum


This should be fairly easy to do. With the cord unplugged, take the screw out that it holding the hard plastic cord cover onto the base of the machine. This is where the cord looks like it's going into the bottom of the machine. The next part is a bi ... Kirby G5 Bagged Upright Vacuum

I need to replace electrical cord - Windsor VS14 Versamatic Bagged Upright Vacuum


... Windsor VS14 Versamatic Bagged Upright Vacuum

We have a Kenmore Progressive Model 116 Upright bagged vacuum with Hepa filter. It's at least a couple years old. For quite some time now when ever we use the vacuum the vacuum motor will shut off nafter about 5 min. of use. We then need to let it sit for awhile and then we can run it again for another 5 min. The bag has been change. Any one have any ideas how to fix this?


I suspect that you have a restriction. The motor sounds like the thermal break is stopping the motor before damage, due to heat.\012You must witness that the entire suction and discharge side are clear. This is not always very easy, but necessa ... Kenmore 34612 Bagged Upright Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

Sebo upright vacuum cleaner - Bag full or clog light on constantly when using as an upright but not when using detachment pipe. Bag changed and no sign of blockage. Is this a common fault or does it need to be taken apart by an authorised repairer?


Hello,\015\012\015\012I have actually written an in depth trouble shooting guide on how to find the clog in your Sebo. Since this light is coming on only when you have the wand inserted into the vacuum and are vacuuming the floor, this i ... Vacuums

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

How do I change the electric cord on my Kirby vacuum?


Hello, younghI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ... Kirby G4 Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

I need a manual for a kirby vac gen #3 - Kirby Generation 3 Bagged Upright Vacuum


Click the link below for the manual It's a very large .pdf file, so just be patient while it loads;http://kirby.110mb.com/docs/kirby_sentria_manual.pdf ... Kirby Generation 3 Bagged Upright Vacuum

I need to replace my belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Hello, amhillI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ... Kirby G4 Bagged Upright Vacuum

Change from blower to vacuum - Kirby G5 Bagged Upright Vacuum


Here is a video to show you ... Kirby G5 Bagged Upright Vacuum

I need an instruction manual for my Kirby - Kirby G5 Bagged Upright Vacuum


Good vac. com has instructions for kirbys for free there are other sites as well but it will take you to sit down and do the research. a lot of people will charge you so since just about any instruction manuel is free online you should probably go th ... Kirby G5 Bagged Upright Vacuum

Kirby g6 carbon brush change - Kirby G4 Bagged Upright Vacuum


This guide has the answer... http://ww.ebay.com/gds/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VA ... Kirby G4 Bagged Upright Vacuum

How do i change my belt on the kirby g6 - Kirby G6 Bagged Upright Vacuum


Hello,For detailed, step by step instructions (with pictures):http://www.goodvac.com/articles.asp?id=143Hope this helps! Ple ... Kirby G6 Bagged Upright Vacuum

Kirby g6- How do you replace the cord? - Kirby Generation 3 Bagged Upright Vacuum


I do believe o6 the cord goes in to the metal housing of the motor .They are usually held in by a rubber grommet and they can with some patience and force be pulled out slowly does it as you don't want the wires ... Kirby Generation 3 Bagged Upright Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

Change the belt on a Kirby - Kirby G4 Bagged Upright Vacuum


CHANGING THE BELT ON KIRBY G3 G4 G5 GSIX ULTIMATE ... Kirby G4 Bagged Upright Vacuum

I need a shampooer tank for a kirby G six. - Kirby G6 Bagged Upright Vacuum


You can purchase one from www.acevacuums.com ... Kirby G6 Bagged Upright Vacuum

How do i change the fill tube - Kirby G4 Bagged Upright Vacuum


Cut the old fill tube from the lower housing and remove the top adapter from the old tube. Clean the bag and housing to be sure the spout the tube attaches to is clean. Be certain to use the fill tube used in the Generation 3 and 4 models which has a ... Kirby G4 Bagged Upright Vacuum

I need a user manual - Kirby Generation 3 Bagged Upright Vacuum


Howdy,\012Kirby has a minimal website, but I was able to find their parts and service number: \012\012\012\0121-800-437-7170\012United States and Canada\012Hope this helps:) ... Kirby Generation 3 Bagged Upright Vacuum

I need a manual - Kirby G6 Bagged Upright Vacuum


KIRBY G6 PDF MANUAL: http://ubermanuals.com/product/kirby-g6-8499 ... Kirby G6 Bagged Upright Vacuum

Need info on replacing on/off switch - Kirby Ultimate G Bagged Upright Vacuum


Here's my free online guide to replacing the power switch....\015\012\015\012http://revie ... Kirby Ultimate G Bagged Upright Vacuum

I need a Kirby G6 Bagged Upright Vacuum manual


Go to their web site for a PDF version to download. ... Kirby G6 Bagged Upright Vacuum

How to change g5 belt - Kirby G5 Bagged Upright Vacuum


1)First, you turn the square belt lifter on the front of the power nozzle until the red arrows line up (belt off) \015\0122)Remove the power head from the front of the machine. Now turn\015\012the belt lifter the other way and line the green ar ... Kirby G5 Bagged Upright Vacuum

I need an instruction manual - Kirby G5 Bagged Upright Vacuum


No luck on finding the G5 manual but Kirby as released a standard manual that works for all Kirby modelshttp://www.goodvac.com/articles.asp?id=135 ... Kirby G5 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1093 seconds