Having problems with your Kirby G5 Bagged Upright Vacuum ?

What parts go to a Kirby Shampooer?

\015 I have 3 Kirby Vacs, and a ton of accessories. I want to know which parts go to the shampooer.\015

Answers :

There is a shampooer head with shampooer brushroll, water tank, small hose that hooks to the tank, collection tray

Need to use the Kirby shampoo. It goes down as wet suds but you pick up the suds with the vacuum when it drys. Fill tank adding 1\015\012cap full of soap (kirby soap only) per level on the side, this\015\012attaches on the side where the bag is attached

After using the shampooer you need to reattach the vacuum bag and main brushroll nozzle as though you were just vacuuming up dirt.

Instructions:

Lift the front of your kirby up (front part with light) open\015\012the handle on the dail in the front (if epquipt), remove the\015\012power head, put on height adjustment on highest level, turn dial on front\015\012of power head until you see 2 red arrows facing each other, unlock\015\012by turning knob, power head should come right off, get\015\012shampooer out the power head for shampooer with collection tray,\015\012make sure dial is set red on red, put on front of Kirby and lock\015\012in, turn dial to green on green arrows, fill tank adding 1\015\012cap full of soap (Kirby soap only) per level on the side, this\015\012attaches on the side where the bag is attached, line up arrow and\015\012notch and turn, to hook up hose put Kirby down to lowest\015\012level, notched end of hose hooks in on tray other end on the tank,on/off switch refers to the foam, Turn machine on to lay the\015\012foam & scrub carpet, take shampooer back off to extract the foam once it's dry.

Good luck.
Repair Help & Product Troubleshooting for Kirby G5 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby Manual I can't find my manual and I need to know how to use the handheld shampooer part of my Kirby. It is the Kirby Sentria. Can you halp? Thanks~ Naomi


The spray gun instruction HERE but be very careful - try shampooing in an inconspicuous area first. This is essentially as if you would buy some of those " ... Kirby G6 Bagged Upright Vacuum

What parts go to a Kirby Shampooer?


There is a shampooer head with shampooer brushroll, water tank, small hose that hooks to the tank, collection trayNeed to use the Kirby shampoo. It goes down as wet suds but you pick up the suds with the vacuum when it drys. Fill tank add ... Kirby G5 Bagged Upright Vacuum

My Kirby shampooer - G4 - hardly used any water from the tank and no suds at all. Pet hair did blow out of the small slotted holes in the tray as I moved the shampooer back and forth, but the carpet was basically dry. I did vacuum before shampooing, so the brush part seemed to work great during shampooing, but no water! The small screen was stuck in the crook of the hose that attached to the tank so I did get that out and put it on the small hole on the tank, but it didn't make any difference. I


Few things:Make sure the sponge and the valve under the sponge (water tank) is clean.Make sure you follow the instructions (f you do not have the manual you can find one ... Kirby Ultimate G Bagged Upright Vacuum

How do I put my shampooer parts on My kIRBY G Series Diamond edition


Here's my online guide...hope it helps!\015\012\015\012http://reviews.ebay.com/KIRBY-CARPET ... Kirby Ultimate G Bagged Upright Vacuum

How do i use the shampooer on kirby i have so many parts and dont know wher to begin to put them


I would contact Kirby directly:http://www.kirby.com/Portals/0/contact_us.html ... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby Generation 3. The handle spring assembly is broke, so I took it apart to get a part number. Can you tell me if there is a cross reference or something on these parts. I am unable to find a part with the same number that is located on the part I took off. The number on this spring assembly shows Kirby HA-670289B K-1. Any help finding this part is appreciated.


... Kirby Vacuums

Can NOT get Kirby G6 shampooer system lowered to use


Take the attachments off and see if you can lower it then..if so .lower the vacuum and put the attachmens on then try ... Kirby G6 Bagged Upright Vacuum

Foam stopped working on my Kirby shampooer


You need to check that the little round screen is in the hole where the hose attaches to the shampoo tank. My guess is that the little round screen is wedged sideways in the end of the hose.\015\012\015\012Marci ... Kirby Ultimate G Bagged Upright Vacuum

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

Kirby shampooer how do i use my kirby shampooer . it was brought to my house but no one showed me how to use it .


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=612593\015\012Kirby shampooer\015\012Posted by wyatt8696 on May 21, 2008\015\012How do i use my Kirby ... Kirby Ultimate G Bagged Upright Vacuum

I am looking for a part for an electrolux model 1522 floor shampooer. The part is the housing for the shampoo activator. The housing is attached to the right portion of the shampooer handle.


... Electrolux Floor Pro Vacuum

Kirby Shampooer I need instructions on how to use my kirby shampooer. Also something I can print out the instruction that is. Thanks


Http://www.greatvacs.com/shampoo.shtml\015\012\015\012this site has instructions with pictures\015\012\015\012Hope this helps!! ... Kirby Heritage II Vacuum

Have kirby g4 carpet shampooer, need instructions for shampooer


Check out the online shampoo manual HEREGood Luck,Rocky:-) ... Kirby G4 Bagged Upright Vacuum

I have what I thought to be a Kirby Classic Omega that is in excellent running condition and looks great. I love it and have been using it for years, but it is recently going through an identity crises! I looked on the identification plate under the motor while cleaning it and discovered that the ID sticker says it's a Kirby Classic III. How can this be when every part of my dear kirby is Omega brown? There is not a hint of Red or Rosewood! Is there another way to determine the actual model b


The Kirby Omega was made from 1973 to 1976.The classic III 1976 to 1979When in for repair the case (motor cover) from a Classic could be put on the Omega. This happens in repair shops if the teck. has two apart at the same time and was no ... Vacuums

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,


You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

Shampooer instructions I need instructions on how to use my Kirby sweeper shampooer attachment how to hook up shampooer


Here is a step-by-step guide to help you out!!\015\012\015\012http://reviews.ebay.com/KIRBY ... Kirby Ultimate G Bagged Upright Vacuum

Are there hand tools you can use with Kirby shampooer?


I love my Kirby and shampooer, but I am wondering if there are any ways to clean stains in small/tight spaces (in corners, between furniture, etc)... my old carpet shampooer had a "hand tool" attachment with spinning brushes, but I don't see an ... Kirby Ultimate G Bagged Upright Vacuum

Kirby shampooer dispensing - NOT a filter problem


I had the same problem and I called my local Kirby guy, he's great, helped me when I thought I blew my kirby up, it was just a cord and he wa able to tell me that over the phone. When I called him with this problem, he knew right away that it was on ... Kirby Ultimate G Bagged Upright Vacuum

Shampooer instructions..... I have a Kirby Generation 3 with the shampooer. it has been awhile since i have used it and i sort of remember how to attach it but i was wondering this vacuum has a tray and i assume it is for sucking up the dirty water but when i went to use it no dirty water was going into the tray.....help what did i do wrong......thank you for your time...............spanny


Try this link....http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTI ... Kirby Generation 3 Bagged Upright Vacuum

Kirby shampooer my shampooer used to work great, but now it won't pump the bubbles. I've replaced the filter, and filled it to the top line with water, but no bubbles. the only thing I can think is that the gasket is leaking.


You are missing the wee round suds screen that fits over the small hole on the tank where the hose fits on. Without this screen it will not make foam.  ... Kirby Heritage II Vacuum

How do i use the kirby shampooer - Kirby Ultimate G Bagged Upright Vacuum


Hi,\015\012I'ts a little fiddly - but pretty good when it gets going.\015\012Remove bag from bottom connection by swinging outwards untill it clicks - then remove upwards. Unclip at the top also.\015\012Undo belt by rotating centre ... Kirby Ultimate G Bagged Upright Vacuum

Bissel shampooer I have a bissell shampooer powersteamer power brush model 1694-W. I cant get it to dispense water onto the carpet anymore. I think it's because I let my 3 year old ride on it while I was shampooing. I assume I have depressed some special little part that is now broken or mashed or something. Stupid I know....


Yes there is a belt on the side that will need to be changed ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I need a shampooer tank for a kirby G six. - Kirby G6 Bagged Upright Vacuum


You can purchase one from www.acevacuums.com ... Kirby G6 Bagged Upright Vacuum

Kirby shampooer The suds are not coming out of the shampooer. I made sure it was connected right. The sponge filter and the cap are attached. i have a g4 vacuum and the screen in in properly.. if i move at a snails pace i can get spots of suds about every 6 inches or so but not a lot. i have adjusted the on and off, if verified the video its put together correctly but it acts like no suction .. i thought of a small hole in the hose for the suds and cut off about 1 inch it act better but not by


On the shampooer tank, remove the screen cap from the little hole that the shampooer hose plugs onto. Clean the screen and make sure that it is not plugged up with debris. Make sure that the screen is securely glued to the cap all the way around the ... Kirby G4 Bagged Upright Vacuum

Shampooer instructions I need instructions on how to use my Kirby sweeper shampooer attachment


Here's my online guide for using the Kirby shampooer....\015\012\015\012 \015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0322 seconds