Having problems with your Kirby G5 Bagged Upright Vacuum ?
N AND D came off
\015 My wife was vacuuming and told me the N and D pedal came off... i'll put it back in but it doesn't stay...i took it apart and noticed a metal piece in the shape of a "T" with a moveable part was floating around... what do i need to do... thanks\011\015
The N and D are Neutral and Drive. Its for the self propelled feature on the vacuum. The transmission might be out. If you need the self propelled feature, then you need to get that fixed
Repair Help & Product Troubleshooting for Kirby G5 Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The belt keeps coming off. There is a little U shaped metal piece that came off when the belt first came off. Where does it go? When we first got the vacuum, we sucked something up and the belt came off and that little metal piece fell out. The belt now periodically comes off when we bump something. Please help us!!!!!!!!!!!!
... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
I was vacuuming and noticed that the bag needed changing. the red light with the ! inside the triangle also came on. When the bag was changed, the vacuum would not restart. The red light came on. Tried the reset button but nothing happened. Tried unplugging and re-plugging in and nothing happened. Replaced all the filters and still it wouldh't start. So I brought it downstairs and tried one more time to get it to start. it worked! Is there something wrong with the vacuum cleaner? Was it overheat
It was overheated that is why it worked downstairs after cooling off. ... Miele S548 Bagged Canister Vacuum
Fantom vpw46h,house pressure washer.the motor runs,it was setting for sometime started,using it,but never had any pressure besides the house hose pressure, with the motor running,then the pressure startes to work great,while using it the wand hose came out of the pressure washer,i put it back in,now the motor will only run when i try to adjust the wand head but will not produce any pressure and will shut the motor off,it seem like as soon as the wand hose came out of the presure washer and after
The right front wheel came off my G6 Kirby vacuum, then the entire axle and wheel adjustment came loose--including a spring that was attached to something.
Thank heavens for a husband who can fix anything--and save me a lot of money for repairs and advice! ... Kirby Vacuums
My dc 25 stabilizer bar came apart and a spring came out. Its on the right side. I need to know where it goes back in.
... Dyson DC25 All Floors Bagless Upright Vacuum
Service problem MY NAME IS AJAY GAUR AND I BELONG TO DEHRADUN.LAST DECEMBER 07,WHEN MY SERVICE REQUIRED FOR WATER PURIFIER THEN YOUR COMPANY TOLD ME THAT IF U CAN CONTRACT FOR TWO YEARS. WE WILL PROVIDE FREE SERVICE,THE FIRST SERVICE IS ON 15-06-08 MR.SANTOSH JOSHI MOB.NO.9760356529.THAT MAN COME AND CHANGE THE CANDLE AND CARBON.AFTER THAT MY WATER PURIFIER IS NOT WORKING. FROM26-06-08 NO WATER CAME THROUGH PURIFIER I HAD DO SO MANY COMPLAINT BUT NO RESULT CAME. PLEASE TELL ME WHAT CAN I DO.BECA
Remove the inlet pipe of u v chamber and pass the water for 10 mins. again reconnect and switch the machine on.......should work now :) ... Eureka 431A Optima Bagless Upright Vacuum
Hover F7452-900 My brushes are not turning. I have taken the tanks off to check the switch that changes from carpet to hard terrain to Ceramic tile.I noticed that there is a spring that has came off. I tried to disassemble the top half (nose) of the cleaner but I have came to a stand still. I cannot figure out how to remove the cover so I can figure out where the spring should be attached. I have removed all the screws that are visible and it still won't budge. It is loose but on the back side o
Regarding the brushes not turning:\015\012\015\012Your filter may need to be cleaned. It is located behind your brushes. With your tanks removed and the cleaner unplugged; tilt your cleaner back. The filter screen located behind your b ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
The back wheel came off and i went to put it back on and the other wheel that connects to the mechinism/gear height ajustment that goes up/down with a spring in it came off as well. i have been looking for a schematic to put it back together but cant find any.
You do not need schematics, it is fairly easy. Clean and lubricate the teeth on the inside of the front wheel shaft assembly. Insert the spring into small pedal and place the pedal designated opening on the Kirby front fan casing with teeth facing ou ... Kirby G6 Bagged Upright Vacuum
The belt came off. How do I get it back on
The front square trim peice actuallys turns to open up to replace the belt onto the drive spindle ... Kirby Generation 3 Bagged Upright Vacuum
Sparks came out of the area of the foot switch and
This is now a dangerous appliance and should be repaired by a qualified tec ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Shampoo unit came with no instructions. How do I
Hello, saI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take ... Kirby G4 Bagged Upright Vacuum
The water and shampoowon't come out but it cames
This model is famous for burning up the silinoid switch that allows the water to come out the bottom to clean the floors. That will need to be replaced, but my recommendations is to take this model back and bet your money back. It is engineered bad ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum
Electrolux Diplomat LX temperature light came on and won't run now what should we do
... Electrolux Vacuums
The screw that holds the handle to the top of the canister came completely loose. How do I get to it to reattach?
Buy a epoxy cement and fill the hole with it, then drill a hole a little smaller than the screw, and finally insert screw. ... Vacuums
Inside fan or impeller came apart replaced under warranty
Maybe it's the brand of fan that ur using. try buying a different model ... Ridgid 25648 Wet/Dry Vacuum
Metal wand came out of wand handle - won't reinsert
... Dyson DC14 Low Reach Bagless Upright Cyclonic Vacuum
E series power head handle, internal wire came lose
Here is a pix.\015\012\015\012 ... Rainbow E series Canister Wet/Dry Vacuum
Tube came off of floor cleaning/tools or pretreat knob
... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Brush bar came out on one side
Check that the brush bar is sitting into its proper washers at both sides of the Dyson model; sometimes it can fall out of its holding if the sole plate cover hasn't been put on properly. Also check that there is nothing obstructing the beater bar an ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Bag came apart from hose
Do you have the instruction manuel? .if you can't figure it out i would take it to a repair shop and i'm sure they will be happy to show you how to do it. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum
N AND D came off
The N and D are Neutral and Drive. Its for the self propelled feature on the vacuum. The transmission might be out. If you need the self propelled feature, then you need to get that fixed ... Kirby G5 Bagged Upright Vacuum
N/D switch came out of housing
If the pedal shaft came out - it may be very hard to install it back properly and most likelly it will fall out again soon. You may need to get another N/D pedal assembly. To buy it you can go ... Kirby G6 Bagged Upright Vacuum
Belt thensen lose cause a baring came off
Tazman just slide the bearing back onto the end of the roller brush just like the other side and put the belt on the roller brush first and then onto the metal rod sticking out at the back hope your dad isn't to mad ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Dyson DC-07 Hose Wand Spring Came Out. How to put back in?
You'll see that there is a round piece with a cross shape on the inside of the button wand release button - place the end of the spring over the cross - you'll see the same cross on the collar of the machine...it'll take some doing, but line the othe ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Miele S5000 dust bag holder came out with dust bag
... Miele Vacuums