Having problems with your Kirby G5 Bagged Upright Vacuum ?

Kirby G5 Techdrive pedal

\015 I was vacuuming and the Techdrive pedal came off. I went over a small ridge on the floor and the pedal was laying there. We recently had the vacuum in for cleaning but we have since moved and so there is not way I can take it back there. Do I call them? Did the perhaps not get it back in correctly? Do you have any suggestions?Thanks\015

Answers :

Kirby N/D pedal is an assembly that can not just come out. So I would say that it is most likely broken. See THIS ITEM and if the part that was left on the floor is just a part of what you see in the picture then it is broken.
It is possible to assemble it back together but usually it falls apart again fairly quick and it is hard to get the angle at which pedal must be reassembled. We usually do not mess with it.

Good Luck
Repair Help & Product Troubleshooting for Kirby G5 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby G5 Techdrive pedal

Kirby N/D pedal is an assembly that can not just come out. So I would say that it is most likely broken. See THIS ITEM and if the ... Kirby G5 Bagged Upright Vacuum

My Kirby G6 Techdrive pedal came out of the machine. I do not see how to secure it in the unit so it will engage and disengage the drive. Any guidance? Did something break or come off of the shaft?

\015\012The Kirby Gsix is equipped with TechDrive Power Assistant. This feature makes it very easy to move your vacuum back and forth, eliminating any effort on your part. The KirbyTechDrive pedal is opera ... Kirby G6 Bagged Upright Vacuum

The TechDrive Pedal on my Kirby G6 fell out of the back of my vacuum cleaner. I removed the screws from the metal plate one the bottom to try to see if something had come a loose. Can you send me a diagram so I can put it back together or tell me where I can get a service manual. The only part I am having trouble with is the metal piece inside that engages the power drive. Thank you.

The pedal drive fell out . Do you have a manual telling me how to get it together again.. Thanks, Dianne ... Kirby G6 Bagged Upright Vacuum

I have a Series G Kirby Model G7D. The other day when I was vacuuming all of a sudden the TechDrive (Power Drive Assist N/D) pedal fell off. I see the hole that it goes into but when I put it in it's loose and falls out and doesn't control the power drive anymore. When I shook the vacuum I heard something rattling around inside the vacuum head. So I unscrewed the bottom and looked inside and found a small metal part labeled K3 on one side and T on the other side. It looks like it would fit

Hi, I have a Kirby G4 and i'v replaced the carbon brushes myself using a step by step guide however since its been back together it worked for about five minutes it then started sparking from the inside!!(a lot!!) I'v obviously touched something i sh ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G4 Toe-Touch Control pedal jammed

Flip the Kirby over,and you will find screws that hold the front axle in place.Remove the screws and the front axle.Debris may be caught in the mechanism.Clean the debris out,and use WD-40 to lubricate the mechanism.May be able to do this without rem ... Kirby G4 Bagged Upright Vacuum

Kirby G7D neutral drive pedal

... Kirby Ultimate G Bagged Upright Vacuum

Kirby neutral/drive pedal

HELLO, JUST USE THIS GUIDE! :0)http://reviews.ebay.com/REPLACING-OR-REPAIRING-KIRBY-VACUUM-NEUTRAL-DRIVE-PEDAL?ugi ... Kirby G5 Bagged Upright Vacuum

Kirby sentria neutral drive pedal fell out - Vacuums

... Vacuums

KIRBY G6 Wheel with the foot pedal to raise and lower has fallen off and wont seem to go back on????

... Kirby G6 Bagged Upright Vacuum

The Neutral/drive pedal fell off our Kirby G5 vacuum cleaner. I opened up the area housing its connection to the transmission and a couple of the parts were just laying inside. I need a diagram for assembling it and see if I am missing any parts. It was a refurbished machine and a paperclip fell out of the housing when I opened it. Can you help me?

Hi,In the below links you have the parts diagram as you asked will this helps you?If not let me know i will help you more.http://www.fiorijanitorial.com/s-19-kirby-parts-and-bags-generation-3456.aspxhttp://www.vacu ... Kirby G5 Bagged Upright Vacuum

My G6 kirby stopped working. i have checked the wire for fraying and continuity and found no problems. I have noticed that the foot pedal that turns the machine on doesn't seem to click when pushed on or off either. i have the motor exposed now to check if it is bad, but i am not sure how to pursue doing just that.

... Kirby G6 Bagged Upright Vacuum

The TechDrive fell out of my Kirby Ultimate G. This is the lever you step on to make the wheels move freely when vacuuming. How do you fix it?

... Kirby G5 Bagged Upright Vacuum

To to put together the neutral drive pedal of kirby sentria

... Kirby Ultimate G Bagged Upright Vacuum

How do i put the drive pedal back on a kirby ultimate G vacuum?

... Vacuums

My techdrive will not work my wheels - Kirby Vacuums

... Kirby Vacuums

My Kirby G3 diamond series won't turn on

Hi There, The most common problem by far is that the cord is faulty. This is a pretty easy repair to do at home. If your machine was randomly cutting out before it stopped altogether then the cord is likely the culprit. If however it stopped all of a ... Kirby Generation 3 Bagged Upright Vacuum

The headlight on my Kirby doesn't work!

A few problems exist in this situation.\015\012A. Is the bulb you put in a genuine kirby part?\015\012If not it is probally not the correct anperage.\015\012B. Are the little medal pieces on the end lined up correctly? If not adjust ... Kirby Generation 3 Bagged Upright Vacuum

Kirby G7d neutral drive broken

... Kirby Ultimate G Bagged Upright Vacuum

Kirby g5 vacuum

You might need to take it apart and see if the gear things inside the vacuum came un-apart and see if you can fix it or take it to get it fixed somewere ... Kirby G5 Bagged Upright Vacuum

I have what I thought to be a Kirby Classic Omega that is in excellent running condition and looks great. I love it and have been using it for years, but it is recently going through an identity crises! I looked on the identification plate under the motor while cleaning it and discovered that the ID sticker says it's a Kirby Classic III. How can this be when every part of my dear kirby is Omega brown? There is not a hint of Red or Rosewood! Is there another way to determine the actual model b

The Kirby Omega was made from 1973 to 1976.The classic III 1976 to 1979When in for repair the case (motor cover) from a Classic could be put on the Omega. This happens in repair shops if the teck. has two apart at the same time and was no ... Vacuums

Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use

If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum

I am replacing a foot pedal on an upright Sharp vacuum cleaner-EC-TU2607. I have the broken foot pedal removed from vacuum cleaner proper but it is the removal of the broken pedal from its spring load that has me puzzled. I applied some pulling effort on the pin that holds the spring in place but there doesn't seem to be any give. Is that the correct approach or is there something else that one should be doing first to release some of the resistance by the pin or spring? Thanks!

... Sharp Twin Energy EC-TU2607 Vacuum

Kirby Manual I can't find my manual and I need to know how to use the handheld shampooer part of my Kirby. It is the Kirby Sentria. Can you halp? Thanks~ Naomi

The spray gun instruction HERE but be very careful - try shampooing in an inconspicuous area first. This is essentially as if you would buy some of those " ... Kirby G6 Bagged Upright Vacuum

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,

You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

It's been awhile since I have used my shampoo system on my Ultimate G series Kirby. Well, as instructed I took it apart and cleaned it. Now I can?t figure out where to put the ?screen cap? and ?sponge filter?. I have my manual in front of me and the only place it shows the filter and sponge (page 35 in the manual) is when it?s been taken apart to clean. It doesn?t show where to put it back. I don?t know what I would do without all the pictures in the Kirby manual. HELP! Thanx. Visual Kirby Vacuu

Hello,\015\012The littlew round screen goes in the hole where the hose attaches to the tank. The round foam filter goes up in the hole underneath the on/off valve for the foam. Here is a guide if you need any more help...\015\012\01 ... Kirby G6 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1342 seconds