Having problems with your Kirby G6 Bagged Upright Vacuum ?

How do i replace a kirby vacumme bag?

\015 Cant do it proprly\015

Answers :

If you look on the back where the bag goes in the vacuum you will see a strap at the end of the bag, loosen the strap and remove the bag
Repair Help & Product Troubleshooting for Kirby G6 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i replace a kirby vacumme bag?


If you look on the back where the bag goes in the vacuum you will see a strap at the end of the bag, loosen the strap and remove the bag ... Kirby G6 Bagged Upright Vacuum

I just notice when I went to change bag in my Kirby G4 that the whose inside was split open, which made all the dust fill up in the bag. How do I get a replacement part for this and what is that part called. Do I need to buy the whole outer bag?


You do not need a whole bag. The bag fill tube is replaceable. can be temp fixed with duct tape and new one installed at home. vacuum inside with another vac and you will be set to replace ... Kirby G4 Bagged Upright Vacuum

Replace Kirby legend II fan (impeller blade) - Kirby G4 Bagged Upright Vacuum


In order to replace the fan you will buy a 2 or three piece lexan fan kit containing the fan a spacer and shaft. You must remove the carpet head and then looking from the back of the machine you will find a series of philips screws on the oute ... Kirby G4 Bagged Upright Vacuum

Kirby My Kirby is less than a year old.  It's suction is no longer strong. I tried cleaning the hose and even replacing the bag.  Do you have any other suggestions.  By the way, I have the Sentera model.  Thank You


Here is a link to my online troubleshooting guide. Hope it helps...\015\012\015\012http://r ... Kirby Generation 3 Bagged Upright Vacuum

How do you replace belt on a Kirby G5 - Kirby G5 Bagged Upright Vacuum


Hi there SmartAlec from NelsonVacuums.com.au here. I was going to write an explaination on how to do it when i cam across this great video clip of how to do it on youtube. ... Kirby G5 Bagged Upright Vacuum

Im trying to replace the cloth bag on my Kirby G6. How do I release the belt that holds the cloth bag at the bottom of the assembly? It is grey and has teeth that grab when tightened on the bottom of the unit.


Kirby G6\015\012Im trying to replace the cloth bag on my Kirby G6. How do I release the belt that holds the cloth bag at the bottom of the assembly? It is grey and has teeth that grab when tightened on the bottom of the unit. ... Vacuums

Not sucking i have a KIRBY G3 that was working great. One day there was a strong smell and the brush roller belt broke so I replaced it. The fan looks good. Now the vacuum does not **** up dirt but instead seems to very gently blow air forward. I took the (new) bag off and it is blowing hard int the bag. I am stumped!


Belt is not connect to the drive pulley, see manual for fitting or see utube for video ... Kirby Generation 3 Bagged Upright Vacuum

Kirby g6- How do you replace the cord? - Kirby Generation 3 Bagged Upright Vacuum


I do believe o6 the cord goes in to the metal housing of the motor .They are usually held in by a rubber grommet and they can with some patience and force be pulled out slowly does it as you don't want the wires ... Kirby Generation 3 Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby Heritage II Turbo and I need a user's manual, but can't find one anywhere. I have to replace the fill tube in the bag and can see the cable tie on top that holds it in place, but don't know how it's attached to the mini-emtor. If I can't replace the fill tube, will tape fix it? If I just taped it; will it hold? Thanks.


Taping usually just causes a mess. The mini-emptor has coarse threads on it that the fill tube screws on to. Occasionally there is a cable tie on the bottom which is not really necessary. If you cut the tube near the bottom, you can get hold of it's ... Kirby Heritage II Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

I need to replace my belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Hello, amhillI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ... Kirby G4 Bagged Upright Vacuum

Need info on replacing on/off switch - Kirby Ultimate G Bagged Upright Vacuum


Here's my free online guide to replacing the power switch....\015\012\015\012http://revie ... Kirby Ultimate G Bagged Upright Vacuum

How do I replace the vacuum bag in my Kirby Ultima?


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=790541\015\012Generic problem for all Vacuums\015\012How do I replace the\015\012Posted by lunalilo on ... Vacuums

I need topknow how to replace the belt - Kirby G4 Bagged Upright Vacuum


The following link lead to the Kirby site, which has an excellent instruction video for replacing the belt. Just click on one of the symbols to the right of "Changing the Belt". If you don't have either of these video viewers, you can download one at ... Kirby G4 Bagged Upright Vacuum

No manual, want to replace fan Impeller - Kirby G4 Bagged Upright Vacuum


Hi,\015\012 Here is their instructional video....click below\015\012http://www.kirby.com/Portals/0/videos.html\015\012\015\012 He ... Kirby G4 Bagged Upright Vacuum

Have a Kirby Heritage II vacuum. Need to replace a split fill tube. How do I remove the outer cloth bag from the mini-emptor, and then how do I take off the old/attach a new fill tube?


This repair guide should answer all of your questions...http://reviews.ebay.com/HOW-TO-REPLACE-REPAIR-KIRBY-VACUUM-H ... Kirby Heritage II Vacuum

Replace the roller on my kirby vacumm generation 3


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=814340\015\012Generic problem for all Vacuums\015\012Replace the roller on my\015\012Posted by tlourene ... Vacuums

How do i replace the internal hose on a g4 - Kirby G4 Bagged Upright Vacuum


It has 2 large zip ties and it screws off with the threaded hose. vac stores sell the hose ... Kirby G4 Bagged Upright Vacuum

I broke the zipper on the cloth bag on my kirby gen. 3 can i replace this myself


Most shoe repair shops can repair or replace the zipper. It is MUCH less expensive than buying a new bag. ... Kirby Generation 3 Bagged Upright Vacuum

Kirby g4 vacuum- need to replace the plastic connection piece between the vacuum bag and the vacuum base...anyone know where and how to do this?


See if this helps\015\012http://www.goodvac.com/kb_results.asp?ID=12\015\012\015\012Good Luck,\015\012Rocky ... Kirby G4 Bagged Upright Vacuum

The bag latch on my Kirby Generation 3 broke. How do I get the old one off to replace it


At the bottom of the bag, there is a zip tie around the plastic part that turns & snaps on to the exhaust hole of the vac. also take a flat screwdriver & pull up the rubber under the zip tie...all the way around, like u would take a bike tir ... Kirby Generation 3 Bagged Upright Vacuum

I broke my kirby generation 3 vacuum cloth bag latch i found where to get the part but how do take it apart to replace it


... Kirby Generation 3 Bagged Upright Vacuum

Cant get the suction impellar off to replace - Kirby Generation 3 Bagged Upright Vacuum


Shaft has to be spun clockwise. It has reversed thread. If this is not the problem but you just need to somehow hold the field - see instructions HERE. You may ... Kirby Generation 3 Bagged Upright Vacuum

How do i replace the belt - Kirby G6 Bagged Upright Vacuum


Hello,Check this out, it should help:http://www.goodvac.com/articles.asp?id=143Good luck,Rocky ... Kirby G6 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0642 seconds