Having problems with your Kirby G6 Bagged Upright Vacuum ?

Right wheel slips off on Kirby Gsix . How do I fix it?

\015 I can not get it to stay on. I can get the spring loaded and the teeth where they need to be but noway to get the shaft to stay and keep wheel in place.\015

Answers :

\015\012The shaft is held onto the machine with two little metal pieces on the bottom of the Kirby. They are held on with screws. The rear wheels are held onto the shaft with a little tiny "c" clip.
Repair Help & Product Troubleshooting for Kirby G6 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Right wheel slips off on Kirby Gsix . How do I fix it?

Hello,\015\012The shaft is held onto the machine with two little metal pieces on the bottom of the Kirby. They are held on with screws. The rear wheels are held onto the shaft with a little tiny "c" clip.\015\012\015\012Marci ... Kirby G6 Bagged Upright Vacuum

The right front wheel came off my G6 Kirby vacuum, then the entire axle and wheel adjustment came loose--including a spring that was attached to something.

Thank heavens for a husband who can fix anything--and save me a lot of money for repairs and advice! ... Kirby Vacuums

The TechDrive fell out of my Kirby Ultimate G. This is the lever you step on to make the wheels move freely when vacuuming. How do you fix it?

... Kirby G5 Bagged Upright Vacuum

The right, front wheel on my Kirby Ultimate G won't stay on. It seems to only be held on by friction, and I've hammered it and put plumbers teflon tape to tighten, but it still comes off within 5 minutes of vacuuming. Any solution would be greatly appreciated!

Epoxy! ... Kirby Ultimate G Bagged Upright Vacuum

Front wheel slips off shaft

Pull the wheel off. Look on the back side of the wheel - you will see 4 plastic pins sticking out (inside the wheel) Use a pen to push on them - this way you will remove the hub cap without damaging it. Under the hub cap you will find the screw. Yo ... Kirby G6 Bagged Upright Vacuum

Kirby G5 rear wheels lock up completely when in "Drive"

When wheels lock when vacuum is OFF - it is normal. If it happens when Kirby is ON then there are a few things that may have gone wrongPrimary drive belt is broken or something is wrong with plastic gears. See how to check the primary dri ... Kirby G5 Bagged Upright Vacuum

I have a kirby G4 hoover which set on fire yesterday burning my hand and giving me a electric shock who can help me with this?The hoover is serviced regually by a kirby engenere it was done 4 week ago and didnt seem right from then.What are my customer rights on this matter

Call or go to him explaining this matter. They should inspect this again since they had done service work t your expense ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Ultimate G wheels lock up when in drive...

Replace the transmission. The tranny that drives these Kirbys can give you problems. ... Kirby Ultimate G Bagged Upright Vacuum

Right wheel fell off.

I need more specific information. What brand and model of vacuum? Does it have a metal or plastic axle? ... Vacuums

Neato right wheel stuck - Neato Robotics Neato Right Drive Wheel

... Neato Robotics Neato Right Drive Wheel

Both of the wheels are wobbly and loose on my Kenmore upright vacuum model 721.37060. I don't see where I can remove them to analyze and fix the problem, which seems to be that the wheels are loose on their axels. How do I get the wheels off and what do you think I'll find inside?

Most if not all vacuums have an access panel on the bottom.It may be held on by a couple of big plastic clips,the kind you squeeze together and it releases a door.Some have plastic screws.There may also be a couple of phillips screws along with it or ... Kenmore Vacuums

How do I install the front wheels on a kirby sentria G10D? One of the front wheels broke completely off so I ordered the front wheel shaft assy but I didn't remove the broken one so I am having difficulty with how to put the new one on.

... RTO Vacuums

We bought our Kirby less than 5 years ago and lately are not happy with it....it keeps breaking. The warranty has expired and our biggest complaint is that it has lost it's suction power. All the contents stay in the hose when I vacuum out the car or upholstery and it does vacuum well at all. The Kirby store quoted us over $200 to fix/ service it. Apparently this is not covered in the free yearly maintenance which we just had done. Any suggestions?

\012 Hi there,\012Well I do have a suggestion though you may not like it use it as a boat anchor.....no no I am just kidding. I have sold vacuums for 20 years and Kirby has b ... Kirby Ultimate G Bagged Upright Vacuum

I have a Dyson DC25. The wheels won't return to the "storage" or "up-right" position. The red and gray "levers" that you step on to put in the up-right position seem to be locked. Any suggestions? Thank you, Cari

... Dyson Vacuums

My Hoover Whisper Cyclonic is collecting the dirt but not taking it into the cylinder. The brushes were at one point starting and stoping due to the belt periodically turning,now the brushes are turning and the dirt just collects and I'm starting to smell a an oder like rubber burning.I've taken it apart and tried to make sure the is no clog. The one hose that I can't check is in the back right base, above and left of the right back wheel.

... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Kirby G3 I threw out my last bag for my kirby. I have an other model and now i dont know which type I need to get. I have 4 Style #2 bags but they are not the right ones... Help!

Beginning with the G series, G3 and G4 had round openings for the dirt intake. Prior models had oval so they will not fit, so find G3 or G4 bags and you will be set ... Kirby Generation 3 Bagged Upright Vacuum

I have an old Fantom Twister Bagless. Model:FM 760 The right wheel came off. I was wondering if you have any wheels that are similar, that I could purchase, that would work on this machine.

You can purchase a new wheel at the following link for $8http://www.totalvac.com/parts/F-75014ES. ... Vacuums

Lost a wheel for my kirby vac - Kirby G4 Bagged Upright Vacuum

Call uk systems on 08005420029 they are a main agent for kirby for spares and repairs ... Kirby G4 Bagged Upright Vacuum

I bought a fantom vacuum on HSN about 9 years ago.Whan it was delivered the first one was broken so they sent a second one.tThat one also was cracked on covering for brush. I called and they told me they were no longer available,so I kept that one,since it would cost me shipping to return.The back right side wheel evenually cracked and fell off.I was able to put it back on and it would stay for a few weeks or so.It now has a large piece of plastic that has broken off the wheel where the bolt fit

... Vacuums

How do I fix Bissell Quicksteamer leaking from water tank through wheels? After I place the filled Clean/Solution tank on the Lower body of the QuickSteamer, water pours out from the body of the machine through the wheels even before I turn the power switch on. I checked the tank and there are no holes in the plastic tank.

I have the same problem... seems to be because of a bad, or worn, rubber gasket. ... Bissell Vacuums

G5 Kirby. Works in Neutral fine. When Drive is engaged and I push forward, the wheels do not rotate forwards, however on the pullback stroke the wheels rotate backwards. What causes this? Something is clearly in the wrong position, so a diagram showing the correct position of the part that is affected would be useful.

Hello, anjeI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

Floor tool wheel will not revolve on dyson dc08 origin vacuum - seems to be jammed. How do I disassemble the unit to fix the problem with the wheel. Everything seems to be clicked in. I do not want to force anything - I might just break it. Any help will be appreciated. Thanks.

Hi,The wheels on the floor tool get junked up with hair pretty quickly, at least they did for our Dyson. The metal peg that holds them in has grooved teeth to prevent it coming out easily, but it will come out if you get a claw hammer an ... Vacuums

My back wheel won't roll on my electrolux 2100. If I turn the cannister over, I can spin the wheel, but when I place it right side down, it just drags on the floor. How do I replace it?

Hi you need to find a local Vacuum repair place one that deals in Electrolux, and go there and take the vacuum or the make and model, and ask for a replacement part, that is the only way that you would be able to obtain spare parts, in fact while you ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Fix kirby vacuum - Kirby G4 Bagged Upright Vacuum

See your local kirby agent for service ... Kirby G4 Bagged Upright Vacuum

Neato wheel is stuck - Neato Robotics Neato Right Drive Wheel

... Neato Robotics Neato Right Drive Wheel
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0648 seconds