Having problems with your Kirby G6 Bagged Upright Vacuum ?

Kirby G6 attaching fluffer brush on shampooer

\015 I can't seem to remember how to attach the fluffer brush on my shampooer and I was wondering if you could offer me any help.\015

Answers :

Sure can,
\015\012
\015\012You have two choices,
\015\0121.) To use your shampoo attachment, you'll need the fluffer shield, To set up the attachment seperate the tray assembly (the part that holds the roller brush) from the nozzle assembly (the part that attaches to the machine). Now seperate the roller brush from the tray (easiest way is to pull the belt). Insert the roller brush into the fluffer shield (it only goes one way). Insert the fluffer shield with the roller brush installed into the nozzle assembly the plastic shield will be faced towards the front of the machine. Turn belt lifter to where the red arrows match and attach to the front of the machine. Turn belt lifter to where the green arrows match and you should be in business.
\015\012
\015\0122.) Your using the floor buffing attachment it the easiest method just put on like the floor nozzle (thing you vacuum with).
Repair Help & Product Troubleshooting for Kirby G6 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby G6 attaching fluffer brush on shampooer


Sure can,\015\012\015\012You have two choices, \015\0121.) To use your shampoo attachment, you'll need the fluffer shield, To set up the attachment seperate the tray assembly (the part that holds the roller brush) from the nozzle as ... Kirby G6 Bagged Upright Vacuum

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

My Kirby shampooer - G4 - hardly used any water from the tank and no suds at all. Pet hair did blow out of the small slotted holes in the tray as I moved the shampooer back and forth, but the carpet was basically dry. I did vacuum before shampooing, so the brush part seemed to work great during shampooing, but no water! The small screen was stuck in the crook of the hose that attached to the tank so I did get that out and put it on the small hole on the tank, but it didn't make any difference. I


Few things:Make sure the sponge and the valve under the sponge (water tank) is clean.Make sure you follow the instructions (f you do not have the manual you can find one ... Kirby Ultimate G Bagged Upright Vacuum

Where does the carpet fluffer go on the kirby shampooer?


... Vacuums

We lost our instructions to the Kirby Shampoo attachement and how to attach it to the main unit, the belt and how to use it. We need complete instructions and explanations on how to use this as we have tried and the belt does not attach to the main unit, the brush does not turn and the hops along the carpet and no water, etc. returns to the tray. Please help us with as simple and complete instructions as possible. THANK YOU VERY MUCH, LOUIE CAPLAN


First, you'll need to fill the tank with water (warm or cold). There are three fill lines on the side of the tank. Fill to the desired line and add one shampooer tank lid full of Kirby shampoo for each line of water. A full tank will require th ... Vacuums

Brush turning slowly while shampooing. It starts out fast, but after a minute or 2 the brush is not spinning very fast. I have powered it off and let it cool down. I just started out so I can't believe the engine is over heating, just doing 2 rooms, can't even get through the first room. If I take the brush attachment off, then put it back on and then turn it on, it spins fast, but after a a few minutes, it's spinning softly/slowly again. Kirby diamond edition


Track not set properly in grooves\015\012there could be a clog or the cleaner has built in feature to slow down heads for better cleaning this does it on its own ... Vacuums

Shampooer instructions I need instructions on how to use my Kirby sweeper shampooer attachment how to hook up shampooer


Here is a step-by-step guide to help you out!!\015\012\015\012http://reviews.ebay.com/KIRBY ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Ultimate G will not suck with main brush head attachment


You need a new belt. When the green light goes out, the brush is not spinning. The belt is stretched and needs replaced. Here are detailed belt changing instructions....\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby vacuum with the shampooing attachment. The shampoo/liquid comes out of the shampooer in a drizzle of liquid. There is no foam.


You need to check that the little round screen is in the hole where the hose attaches to the shampoo tank. My guess is that the little round screen is wedged sideways in the end of the hose.\015\012 \015\012Here is a guide to help you further...\015\ ... Kirby Ultimate G Bagged Upright Vacuum

Where does the carpet fluffer to on the kirby shampooer


You remove the 'vacuum' head and use the same one as for the shampooer (on mine at least) ... Kirby Ultimate G Bagged Upright Vacuum

Shampooer instructions I need instructions on how to use my Kirby sweeper shampooer attachment


Here's my online guide for using the Kirby shampooer....\015\012\015\012 \015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

I have a kirby G7D model ultimate g, the diamond edition. i took the brush part off , and used the attachments, i put the brush back on, and now it wont turn on.


Did you happen to hit the N/D switch by accident on the bottom. The switch has to be in D to run. ... Kirby G6 Bagged Upright Vacuum

Kirby shampooer The suds are not coming out of the shampooer. I made sure it was connected right. The sponge filter and the cap are attached. i have a g4 vacuum and the screen in in properly.. if i move at a snails pace i can get spots of suds about every 6 inches or so but not a lot. i have adjusted the on and off, if verified the video its put together correctly but it acts like no suction .. i thought of a small hole in the hose for the suds and cut off about 1 inch it act better but not by


On the shampooer tank, remove the screen cap from the little hole that the shampooer hose plugs onto. Clean the screen and make sure that it is not plugged up with debris. Make sure that the screen is securely glued to the cap all the way around the ... Kirby G4 Bagged Upright Vacuum

Kirby shampooer The suds are not coming out of the shampooer. I made sure it was connected right. The sponge filter and the cap are attached.


You may be missing the small round suds screen. It should cover the hole where the shampoo goes from the tank into the hose. It may be wedged sideways in the hose end. \015\012\015\012Marci ... Kirby Generation 3 Bagged Upright Vacuum

Kirby shampooer I know how to put the shampooer with the tank and hose but have no idea wher the carpet fluffer goes?


Here are instructions with pictures of how to put the kirby shampooer together...\015\012\015\012http://www.greatvacs.com/shampoo.shtml\015\012 ... Kirby G5 Bagged Upright Vacuum

How do i attach the shampooer to my g6 kirby - Kirby G6 Bagged Upright Vacuum


Greetings,\015\012\015\012Here's an easy to understand and follow video review on how to attach the carpet shampooer to the Kirby Generation 6 (G6). The model that's being used in this video is a little newer model, the Sentria, but the ... Kirby G6 Bagged Upright Vacuum

Shampooer instructions..... I have a Kirby Generation 3 with the shampooer. it has been awhile since i have used it and i sort of remember how to attach it but i was wondering this vacuum has a tray and i assume it is for sucking up the dirty water but when i went to use it no dirty water was going into the tray.....help what did i do wrong......thank you for your time...............spanny


Try this link....http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTI ... Kirby Generation 3 Bagged Upright Vacuum

My Kirby vacuum lost most of its suction. .. The hose attachment is clear, the brush attachment the same.


... Kirby G6 Bagged Upright Vacuum

I have a Kirby Generation 3 that will not power on with the Carpet Brush attachement BUT will power on with the hose attachment. Please advise. Thanks


Make sure everything is lined up and and bag is fully attached. If it does not work after that, you could have a defective safety switch. Take it you an Authorized Kirby Dealer. Don't pay more than $40 for this repair. ... Kirby Generation 3 Bagged Upright Vacuum

Can NOT get Kirby G6 shampooer system lowered to use


Take the attachments off and see if you can lower it then..if so .lower the vacuum and put the attachmens on then try ... Kirby G6 Bagged Upright Vacuum

Kirby sweeper shampooer attachment HOW TO use it


 \015\012\015\012Please follw this link to view my carpet shampooing guide. Hope it is helpful!! :0)\015\012\015\012Marci\015\012\015\012 \015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Are there hand tools you can use with Kirby shampooer?


I love my Kirby and shampooer, but I am wondering if there are any ways to clean stains in small/tight spaces (in corners, between furniture, etc)... my old carpet shampooer had a "hand tool" attachment with spinning brushes, but I don't see an ... Kirby Ultimate G Bagged Upright Vacuum

How do you remove brush roller from kirby legend 11 shampooer


... Kirby Vacuums

I am using a Kirby Hertigae II shampoo attachment and the belt broke, I am trying to replace the belt, but cannot remove the bottom brush that the belt hooks onto.


Try using a pair of pliers on each side to remove the screws you only need to remove 1 ... Kirby Heritage II Vacuum

I attached the kirby shampooer but now it won't turn on. What am I missing or what did I do wrong?


Here's my online guide... hope it helps!\015\012\015\012http://reviews.ebay.com/KIRBY-CARPE ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0469 seconds