Having problems with your Kirby Generation 3 Bagged Upright Vacuum ?

Ran over cord and the vacuum shut down, won't

\015 I have a Kirby G3 vacuum. The last time I used it, I accidentally ran over the cord and the machine shut off by itself. There's no damage to the cord. The vacuum won't start now. Am I right that there's some kind of safety switch that goes off when you run over the cord? Is there a reset button somewhere? Thanks a lot!\015

Answers :

Sounds like it might have broken a wire in the cord and may have to replace the cord unless you can find the broken wire and splice it back together
Repair Help & Product Troubleshooting for Kirby Generation 3 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Ran over cord and the vacuum shut down, won't

Sounds like it might have broken a wire in the cord and may have to replace the cord unless you can find the broken wire and splice it back together ... Kirby Generation 3 Bagged Upright Vacuum

Miele canister vacuum cord wont retract - Miele Vacuums

... Miele Vacuums

Miele classic vacuum,wont run, tried pressing restart.Was working fine earlier in day. When cord retracting the 1200 watt setting light on top of vacuum came on for a split second.

Vacuums have a heat activated breaker in them. Is the action end hot? If you get a clog, the motor won't get the air blowing through it and it will overheat causing the breaker to blow. If this is the case, wait (sometimes a few hours) for it to cool ... Miele Vacuums

Over heats and shuts off, wont start again untill it cools off. can maybe vacuum one room before overheating. cyclone tubes are all clean, all hoses & lines are clear. this vacuum is fairly new, not used much. cant find a reset button. is the moter dirty of something?

The electric motor has a thermal switch and is self-resetting so there is no re-set switch. Make sure the air filter for the exhaust is clean. Also make sure that the height adjustment is not too low causing strain on the motor. Always bring the heig ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

I have a hoover windtunnel upright vacuum, It will not shut off and I have to unplug it to do so. If I take apart the upper handle and manually flip the internal switch it works just fine, only when using the external switch on the handle, wont shut off.

This is a common problem with this machine. The switch has too much resistance to be turned on and off with the switch button and rod. If you put in a new switch, ( # 28161075 ), your problem should be fixed. ... Vacuums

Could I have a short in my cord? I can vacuum & then when I move the canister it shuts off, if I wiggle the cord it will turn back on. This last time, it just revs like a car trying to start & then does nothing. I live in a VERY remote area (80 miles from nearest Wal-Mart or McDonalds) so I know I will not be able to find someone to repair this for me. I have great doubt that I will be able to do it myself & my husband is an accountant so he is unavailable for another 6 weeks!!!!! Any suggestion

Whit the vacume plugged in and turned on start where the cord goes in to it and hold the cord whith each hand and bend it slightly. Move up the cord and do the same if there is a brake in the cord the machine will loose power until you bend the secti ... Miele Red Star Bagged Canister Vacuum

I have a problem with a miele s524 canister vacuum. While the motor is running and you pull out the power cord for more length it shuts off.

S524 vacuum was vacuuming the floor under the a chair wand everything was floor level it stopped running checked all connections everything was connected no blockages etc help !!!! ... Miele S524 Mercury Bagged Canister Vacuum

My eureka vacuum just shut off while i was using it now it wont turn back on there was no smell while this happend and i tried other outlets in the house and still did not turn on so that was not the problem i dont know wht happend??

It could just be hot just let it set and cool then try it ... Vacuums

Shuts down at points on the retractable cord - Miele s558 Silver Moon Vacuum

Your cord could be loose or it may need to be replaced this unit comes as one assemble you will have to replace the whole retractable cord assemble ... Miele s558 Silver Moon Vacuum

Heating system wont shut off by itself. - Hayden Industries SuperVac 6000 Central System Vacuum

... Hayden Industries SuperVac 6000 Central System Vacuum

Vacuum shut off with power cord in an active wall outlet. It was loaded with dust/dirt in the bagless cup. Is their a re-set proceedure?

There is a thermal overload switch in the motor. It should reset itself. Let it cool down for a while. And it should start again. ... GE 106585 Upright Vacuum

I ran over a shoe string. Turned the vacuum off and pulled it out. Now the wheel wont turn and it isnt sucking up the dirt.

... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Eureka Bravo with new belt & bag suddenly won't start. I replaced a very worn and slack belt with a new one, vacuum then ran for maybe 20 seconds then shut off and now won't restart at all. Bag was also changed at same time. Is there a fuse, maybe? New belt too tight? Thanks

... Eureka Bravo II Bagged Upright Vacuum

Kenmore canister vacuum 1162651190 power cord wont retract. I paid for an email response yesterday, but then stupidly misspelled my email address, so haven't received the response. Can someone help?

Many a times the lint\015\012gets collected on the reel coil.Remove the coil clean the lint and replace it\015\012and see.--------- the\015\012reel cord jammed.\015\012\015\012To get at the ree ... Vacuums

After operationg for approximately 10 minutes my Dyson vacuum shuts off and wont restart for several hours.

... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

I ran over the cord of the vacuum and in some spots it is down to the copper wire. Is this fixable?

... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Wont shut off when I press the power button - Dirt Devil Featherlite Deluxe Bagged Upright Vacuum

I need to know how to change the belt on a Dirt Devil Upright Feather Lite Deluxe Vaccum cleaner; unable to find the manual. ... Dirt Devil Featherlite Deluxe Bagged Upright Vacuum

My tristar vacuum shuts off while vacuuming

... Tristar Vacuums

Dyson vacuum keeps shutting off on its own

... Dyson DC07 Bagless Upright Cyclonic Vacuum

Vacuum won't start unless I press down on the cord rewind area

... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

U5180-910 vacuum shuts off on own

WARNING, DO NOT BUY THE HOOVER PLATINUM SERIES:WARNING, DO NOT BUY THE HOOVER PLATINUM SERIES:WARNING, DO NOT BUY THE HOOVER PLATINUM SERIES:Piece of junk, out of the box it shuts down after 20 seconds of operation. Also when ... Hoover U5180-900 Vacuum

Miele vacuum Sometimes when I hit the auto roll up cord button or even move the cord, the power vacuum goes off. I move the cord again and it comes back on. I took it apart and looked at the connection from the cord to the auto roller. These are the electrical slip on type connections and are still in good shape. There are no bends in the cord. I air dusted everthing inside, put it together (with no extra parts!). Good news..it powered up so I did not break it, but it still has the same problem.

... Vacuums

I own an Oreck 2310RS upright vacuum cleaner. The cord is too short for my needs. The cord I need is a two wire 25 to 30 foot cord. Where can I buy this vacuum cord and how do I connect it? Thanks, Don

You can buy one at a oreck store but i would tell you to use an extention cord ... Oreck XL2200 Bagged Upright Vacuum

My central vacuum system will not shut off. I had

Please provide more infromation, especially brand. They do differ.\015\012The problem could be as simple as a bad switch to shorted wires somewhere that you need to locate. ... Vacuums

Dyson D25 I was vacuuming and got the cord tangled inside the vacuum dyson 25. We opened it and was able to remove the cord. But the brush stopped spinning when I use the vacuum.

Hi there,Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. Please follow the steps shown in the video below to reset the machine after checking for any remaining obstructions. You may also want to refer to ... Dyson Ball DC24 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0764 seconds