Having problems with your Kirby Generation 3 Bagged Upright Vacuum ?

How to install Kirby g4 fan - Kirby Generation 3 Bagged Upright Vacuum


Answers :

It needs to be stripped completly down, if you are confident at doing this then here goes.
\015\012It has been a while for me so take your time and some of the steps may have to be completed slightly differently.
\015\012Isolate / unplug the machine from the mains
\015\012Remove the bag, handle and front roller assembly so you are left with a bare machine.
\015\012Remove the rear switch cover - 1 x screw.
\015\012remove the top aluminium cover 2 x screws at the back and 2 x screws at the front below the light.
\015\012You should now see the motor and tech drive.
\015\012Remove the tech drive, tech drive belt and rear wheels 4 x screws below the machine.
\015\012Remove the wiring to the motor noting the correct connections for putting back.
\015\012unscrew the motor 4 x screws inside (think) and two at the front below the fan aperature.
\015\012remove the motor and fan complete.
\015\012To remove the fan, note the hole through the fan shaft close to the belt position, this is for leverage when unscrewing the fan, hold the motor shaft, insert a small screw driver or punch through the shaft hole and unscrew to remove the fan.
\015\012Re-fit in reverse order.
Repair Help & Product Troubleshooting for Kirby Generation 3 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to install Kirby g4 fan - Kirby Generation 3 Bagged Upright Vacuum


It needs to be stripped completly down, if you are confident at doing this then here goes.\015\012It has been a while for me so take your time and some of the steps may have to be completed slightly differently.\015\012Isolate / unplug t ... Kirby Generation 3 Bagged Upright Vacuum

Replace fan blade e77491 - Kirby Generation 3 Bagged Upright Vacuum


KIRBY VACUUM REPAIR HOW TO REPLACE THE FAN IMPELLER ... Kirby Generation 3 Bagged Upright Vacuum

Kirby g3 upright will not pick up trash - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

How to set up kirby to vacuum mattress - Kirby Generation 3 Bagged Upright Vacuum


Detach lower end of bag from body of vacuum.\015\012Attach hose to the opening.\015\012Attach above floor tool for vacuuming.\015\012\015\012See video instructions on below site.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

My vacuum kirby turned by itself - Kirby Generation 3 Bagged Upright Vacuum


The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you! ... Kirby Generation 3 Bagged Upright Vacuum

How much horsepower for a Kirby G3 - Kirby Generation 3 Bagged Upright Vacuum


All kirbys are good, i reccomend getting a G6 ... Kirby Generation 3 Bagged Upright Vacuum

How do I assemble kirby g3 carpet cleaner? - Kirby Generation 3 Bagged Upright Vacuum


Greetings,If you click the link below it will take you to a video demonstration that explains step by step what you need to do to convert your Kirby into a carpet shampooer. The vacuum in the video is the Kirby Sentria, but the procedure ... Kirby Generation 3 Bagged Upright Vacuum

Cant turn the bag connect to get it off - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

I need a manual for a kirby vac gen #3 - Kirby Generation 3 Bagged Upright Vacuum


Click the link below for the manual It's a very large .pdf file, so just be patient while it loads;http://kirby.110mb.com/docs/kirby_sentria_manual.pdf ... Kirby Generation 3 Bagged Upright Vacuum

My kirby will not turn on - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Why does a kirby g3 goes on reverse only - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Kirby g6- How do you replace the cord? - Kirby Generation 3 Bagged Upright Vacuum


I do believe o6 the cord goes in to the metal housing of the motor .They are usually held in by a rubber grommet and they can with some patience and force be pulled out slowly does it as you don't want the wires ... Kirby Generation 3 Bagged Upright Vacuum

How to install KIRBY belt lifter HOOK Assy - Kirby G4 Bagged Upright Vacuum


Hello, saI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take ... Kirby G4 Bagged Upright Vacuum

Replace Kirby legend II fan (impeller blade) - Kirby G4 Bagged Upright Vacuum


In order to replace the fan you will buy a 2 or three piece lexan fan kit containing the fan a spacer and shaft. You must remove the carpet head and then looking from the back of the machine you will find a series of philips screws on the oute ... Kirby G4 Bagged Upright Vacuum

How do I detach the bag? - Kirby Generation 3 Bagged Upright Vacuum


Watch the instructional video on our site;\015\012http://www.goodvac.com/\015\012\015\012\015\012Good luck,\015\012Rocky ... Kirby Generation 3 Bagged Upright Vacuum

Vacuum handle stuck in down position - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Runs to fast to vacuum. - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Install kirby belt 301291 - Kirby Ultimate G Bagged Upright Vacuum


I just figured it out myself.\015\012\015\012Thanks ... Kirby Ultimate G Bagged Upright Vacuum

Cant get the suction impellar off to replace - Kirby Generation 3 Bagged Upright Vacuum


Shaft has to be spun clockwise. It has reversed thread. If this is not the problem but you just need to somehow hold the field - see instructions HERE. You may ... Kirby Generation 3 Bagged Upright Vacuum

I don't get not power after attach the hose? - Kirby Generation 3 Bagged Upright Vacuum


Bad power switchSwitch is designed to run motor on higher RPM when hose is connected. The high speed lever mechanism failed and you need the new switch. You can find it ... Kirby Generation 3 Bagged Upright Vacuum

How do i remove the fan - Kirby G4 Bagged Upright Vacuum


Hello, stacyI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would t ... Kirby G4 Bagged Upright Vacuum

How to get the screws in the motor housing - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

I think my fan belt lever is on backwards - Kirby G5 Bagged Upright Vacuum


... Kirby G5 Bagged Upright Vacuum

I need a user manual - Kirby Generation 3 Bagged Upright Vacuum


Howdy,\012Kirby has a minimal website, but I was able to find their parts and service number: \012\012\012\0121-800-437-7170\012United States and Canada\012Hope this helps:) ... Kirby Generation 3 Bagged Upright Vacuum

No manual, want to replace fan Impeller - Kirby G4 Bagged Upright Vacuum


Hi,\015\012 Here is their instructional video....click below\015\012http://www.kirby.com/Portals/0/videos.html\015\012\015\012 He ... Kirby G4 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2697 seconds