Having problems with your Kirby Heritage II Vacuum ?
Replace my fan on my kerby
\015 I HAVE THE FAN FOR MY KIRBY VAC. HERITAGE 2 . SO HOW DO I PUT THE NEW FAN ON ? THE MOTER KEEPS MOVING ?\015
I had to replace mine fan yesterday. I broke away some of the outer pieces and grabbed the fan around the center with some vise grips and put another vise grip on the shaft. ( You can also put a hard steel tool of some kind through the hole in the shaft) when facing the front from the attachment side the shaft unscrews when turning it clockwise.It comes apart right in front of the fan where the washer is.
Repair Help & Product Troubleshooting for Kirby Heritage II Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Replace my fan on my kerby
I had to replace mine fan yesterday. I broke away some of the outer pieces and grabbed the fan around the center with some vise grips and put another vise grip on the shaft. ( You can also put a hard steel tool of some kind through the hole in the sh ... Kirby Heritage II Vacuum
I need to purchase new blades for our 52" Jericho IV ceiling fan, Model 166315. I went to home depot in Harrisville, UT and they said that we would have to contact you and they didn't have ANY replacement fan blades in stock. HOW COULD THAT BE WHEN THEY HAVE HAMPTON BAY FANS ALL OVER THEIR LIGHTING SECTION? What kind of a business are you running when one can't get replacement parts? Our fan is making noise and I want to replace the blades. How hard can that be? By-the- way; I hope you no
Hi On a Hoover convertable model U4497-900 I'm trying to replace the fan. The old fan cracked, then flew apart. I have the new fan, have the motor assembly removed, but can't seem to get the pulley nut off the motor to replace the fan. Is there a trick to this or should I just try to muscle it? Thanks.
Fan replacement I found the part to replace my broken fan. I've remove many screws, but I can't remove, what seems to be, the obvious plate to get to the broken fan.
Http://reviews.ebay.com/KIRBY-VACUUM-REPAIR-HOW-TO-REPLACE-THE-FAN-IMP ... Kirby Ultimate G Bagged Upright Vacuum
Fan replacement I have to replace the fan on my g4 how do I get the old fan that is worn and broken off the shaft,,thanks for any help that you might be able to give
Detailed instructions on fan replacement HEREGoodLuck,Rocky:-) ... Kirby G4 Bagged Upright Vacuum
Fan Replacement How do i get to the fan to replace it?
Remove the front piece and there about 4 screws u need to take out and remove that cover, the fan is right there, then u take out the screw that holds the fan blade or impeller as its called out, and put the new on, we just did it. if u have more qu ... Kirby G4 Bagged Upright Vacuum
My wall ceiling fan's control unit UC 9051T failed. Light switch button does not work. If I replace it with some generic universal unit, do I need to replace transducer located in the fan housing also, or all of them are compatible? Thanks in advance. M
First, you didn't say you checked that the bulb worked. Is that burned out?\015\012\015\012If bulb is ok, you will have to make sure the switch is matched with the fan (ususally a set of 4, 6 or 8 micro-switches have to be set the same i ... Vacuums
Fan and bearing replacement on a Kirby G6
If you run your vac to long after the fan is broke it will cause excessive vibration and the bearings can go out. in almost all cases i replace the fan only. most of the time if you have a bad bearing the vac will make a grinding noise. you can also ... Kirby G6 Bagged Upright Vacuum
The fan on my Dirt Devil model 103 hand held vac cracked. I bought what was designated as the correct replacement fan but the hole in the center of the fan is a lot smaller than the shaft that it has
I need to replace the fan blades on a Kirby Heritage II, Model 2HD, vacuum cleaner. How do I remove the drive shaft that the fan is mounted on? Thanks, Robert Croft
Broken fan need a repair man or service centre. If not a replacement fan for self repair. I live on the Gold Coast Ray is my name. Kirby Legend 1 model 2HE
Http://www.ultimatesanitarysupply.com/pdfs/VacuumMaintenance.pdf\015\012\015\012see the link ... Kirby Vacuums
I have a cooling fan on my wine cooler that burnt out, I need a replacement. I need a Heng Shan Fan model no# FS92252M 12v 0.2 amp
My hoover 600 elite is really load. I took it all apart to find the motor fan is damaged with a broken off piece which must have been vacuumed up into the bag. If I replace it sith a new plastic fan will this quiet the vacuum? right now it is tremendously loud.
... Hoover Elite U5061-900 Bagged Upright Vacuum
I have a Hampton Bay Midili fan which I just installed about a month ago and it was working fine. A few days ago when I flipped the switch on the light flickered on and off consistently until I turned the switch off. The remote also stopped working to control the fan and light. Since this model only can be controlled by the remote I am worried I will have to replace the remote already after only 1 month!
In many of these remote controlled lamps you cant use the new spiral light bulbs .. you can only use standard incandescent lights .. if thats not the trouble then you may indeed have a bad controller (in the fan) .. there is probably at least a 90 d ... Vacuums
Kirby G3 made loud noise when running. Sprayed silicon in fan thinking it might be a bearing. Found a coin and nail in fan and removed. Tha vacuum would not turn on. Replaced switch and brushes. Still nothing. Did the silicon spray do something?
No - the silicon is an insulating material and would have no effect on the electrics of the vacuum. Most likely you have a bad connection - dismantle the vacuum again and check the wiring and the motor with an ohmmeter. Be very attentive with the bru ... Kirby Generation 3 Bagged Upright Vacuum
Poor suction from the upright .I have replaced the hepa filter checked the fan belt and replaced the sponge filter.Thre does not appear to be any blockage. Any solution?
Check the hose for any tears. At the very top, directly under the handle, there is a metal tube inside of the hose. Pull the hose downwards, while holding onto the handle to stretch the hose as far as it will go. Check the very top of the hose for ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
We need to replace the Fan Blades on our Phillips Fan as they heve got very fragile and they are breaking up!
Yes-- This is the big disadvantage of this type of Vacuum-- Stones and sand wear heavily on that impeller turning a very high rate of speed. This can be a tricky job----- depending on how long this fan has been on the motor sh ... Philips Vacuums
Fan just stopped working looking to replace the 7058ym 03 part if I can find it for a hampton bay fan from home depot
I am having the same problem,how did u solve it ... Vacuums
Im trying to replace a fan on a simplicity freedom f3300 vacum. HOW DOES THE OLD FAN COME OFF? It seems to be pressed on but I dont want to brake anything.
Assuming you have the motor out of the fan housings, check to see if you can move the fan around clockwise/counter-clockwise. If the fan is not moveable, the fan has probably melted to the motor housing. Replacing the motor is recommended as the plas ... Simplicity Freedom Cord - F3300 - A434-0314
Replacing the fan hub on a kirby classic omega 1CB
I resolved the problem .I found a way to hold the armature shaft still while I unscrewed the pulley drive nut ,which must be removed in order to remove the vacuum fan.\015\012\015\012> There probably is a special tool somewhere that w ... Kirby Heritage II Vacuum
Oreck xl 9100 how to replace the fan
Hi,I just replaced the fan (plastic) on an XL9100. I assume you got the bottom plate off (5 screws).Undo the single screw holding the suction housing in place.Remove the two screws holding the motor in place and gently ... Oreck XL Ultra Bagged Upright Vacuum
Fan replacement gone bad!
I take it the armature is not moving at all when you are turning the pulley(to the right, is right). You may have to pull the motor asm. out, remove the 4 scres and nuts off of the front bearing plate and pull it out along with the armature. I can ... Kirby G4 Bagged Upright Vacuum
Broken Lexan fan needs to be replaced
It is similar to the G4 but without the tech drive so is easier. ... Kirby Heritage II Vacuum
Kirby Lexan Fan is crack and need help to replace
Hello...\015\012Check out my online instructions...\015\012\015\012http://reviews.ebay. ... Kirby G4 Bagged Upright Vacuum
Inside fan or impeller came apart replaced under warranty
Maybe it's the brand of fan that ur using. try buying a different model ... Ridgid 25648 Wet/Dry Vacuum