Having problems with your Kirby Heritage II Vacuum ?

Fuse for Kirby vacuum

\015 I believe this is Kirby Model 1-HD. It stops working, I tested the electrical cable and the power switch with a voltage meter and they are good. There is current on the black wire to the motor but there is no current on the green wire to the motor. Does this unit have a fuse? I do not see one yet.Thanks,Henry Doan\015

Answers :

I had this problem with a model 1-HE. It was caused by a bad connection at a slide switch mounted on the side of the motor housing. The switch is operated by a lever when the front cover is in place. I think it is a safety system to stop the motor operating when the cover is off. Check for operation of and connection through the switch when the cover is on.
If it's anything like the Heritage II model 2HD, you may find this useful. We got this oldy-but-goody from my in-laws (with issues of course), and just tonight my stepdaughter was complaining about the fact that we never buy anything new with a good warranty. I pondered whether there is such a thing when it comes to vacuum cleaners. Anyway, I started taking it apart, and learned that both the hose and roller housing depress a plunger or actuator, to close a safety switch. Ours was simply dirty. Considering that you have a meter, you could try ringing it out. I didn't have any contact cleaner, but WD40 worked fine to clean up the contacts. One nice thing about the switch, was the markings for the different colored wires: G Y R W from front to back. It's a beautiful thing...when something is built so well, it's just meant to keep running. I wish Kirby would make automobiles. Hope this helps, Kevin H.
Repair Help & Product Troubleshooting for Kirby Heritage II Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where is the fuse on the kirby g5 - Kirby G5 Bagged Upright Vacuum


... Kirby G5 Bagged Upright Vacuum

Fuse for Kirby vacuum


I had this problem with a model 1-HE. It was caused by a bad connection at a slide switch mounted on the side of the motor housing. The switch is operated by a lever when the front cover is in place. I think it is a safety system to stop the motor op ... Kirby Heritage II Vacuum

My kirby was working fine.cord put out of socket. i reinserted cord and vacuum would no longer turn on. is there a fuse that might have tripped that i need to replace?


I had a simular problem and went and bought a nother than realized that the bag wan't locked into place it wont start unless the bag is locked you may thy that my son just bumped the wall and I guess it just jared it loose I guess ... Kirby G5 Bagged Upright Vacuum

I need to change a fuse in a g4 kirby - Vacuums


There is no fuse. If it isn't working, check the cord with an ohm meter to see if one side is open. If one is, then replace the cord. Could also be the switch or a problem with the motor. ... Vacuums

Kirby vacuum I have a G 6 kirby vacuum. The power cord has been checked and has continutity and replaced the power switch and the vacuum will still not run


There are 2 safety switchs, one on the front that the nozzle activates, and one on the side that the bag asembly activates. The motor brushes and/or armature maybe bad. ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,


You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

Kirby heritage vacuum front light


I cleaned the connections on mine and it worked, i think the rollers on the front have magnets or something that affects this too??? don't quote me on that tho ... Kirby Heritage II Vacuum

How to set up kirby to vacuum mattress - Kirby Generation 3 Bagged Upright Vacuum


Detach lower end of bag from body of vacuum.\015\012Attach hose to the opening.\015\012Attach above floor tool for vacuuming.\015\012\015\012See video instructions on below site.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

Kirby skips while vacuuming carpet - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

Kirby Vacuum Serial Number 439345 - Kirby G4 Bagged Upright Vacuum


... Kirby G4 Bagged Upright Vacuum

Where can I find kirby heritage vacuum brush belt 301282 and the vacuum bags for a 1984 kirby heritage?


... Vacuums

Kirby vacuum stuck in drive mode - Kirby Vacuums


... Kirby Vacuums

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

We bought our Kirby less than 5 years ago and lately are not happy with it....it keeps breaking. The warranty has expired and our biggest complaint is that it has lost it's suction power. All the contents stay in the hose when I vacuum out the car or upholstery and it does vacuum well at all. The Kirby store quoted us over $200 to fix/ service it. Apparently this is not covered in the free yearly maintenance which we just had done. Any suggestions?


\012 Hi there,\012Well I do have a suggestion though you may not like it use it as a boat anchor.....no no I am just kidding. I have sold vacuums for 20 years and Kirby has b ... Kirby Ultimate G Bagged Upright Vacuum

Kirby vacuum does not turn on, sentria model - Kirby Vacuums


... Kirby Vacuums

My Vacuum just stop working. I was cleaning my car carpets when it just went off. I tough it got disconnected from the outlet (power supply). The vacuum was connected and it is like when a fuse go bad, just like that it won't turn on anymore. Is there a switch that needs to be reset or a fuse to be replace? How do you do it?? Thanks


There is not any of that. Buy a new one ... Hoover Empower Bagless Upright Vacuum

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

How do i clean the chromr on kirby g4 vacuum - Kirby G4 Bagged Upright Vacuum


The Kirby is polished aluminum. It is best cleaned with mag wheel polish, and lots of "elbow grease". ... Kirby G4 Bagged Upright Vacuum

My vacuum died. It won't turn on. It is not the outlet. Is it a blown fuse? How do I replace the fuse? Where does it go? This vacuum is a little over 2 years old. My older Hoover WindTunnel STILL works and has never had this problem.


It's probably the power switch. My switch was dicey for a couple years, finally gave out. Easy to replace.\015\012\015\012Remove the two screws just above the WARNING on the rear of the upper handle assembly, then slide the whole assemb ... Hoover U6476-910 WindTunnel Upright Vacuum Cleaner Bagged Vacuum

My vacuum kirby turned by itself - Kirby Generation 3 Bagged Upright Vacuum


The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you! ... Kirby Generation 3 Bagged Upright Vacuum

Thank you for the detailed explanation regarding the kirby vacuum functions, but we would like more information about the exact shampooing instructions. in explanation we would like to know exactly what solution and in what quantity to apply first to the fabric... how long we need to let it soak in.... and how to remove the stains using only our kirby vacuum witjh shampoo attatchment from start to finish...


... Kirby Ultimate G Bagged Upright Vacuum

How to put on a kirby vacuum belt - Kirby Vacuums


The emblem on the front of the Kirby vacuum controls the installation of the belt. Rotate this emblem. ( I do not remember which direction it rotates). This relieves the tension on the belt. Replace the belt and rotate the emblem back to lock it ... Kirby Vacuums

Fix kirby vacuum - Kirby G4 Bagged Upright Vacuum


See your local kirby agent for service ... Kirby G4 Bagged Upright Vacuum

Back wheels on kirby vacuum squeak - Kirby Heritage II Vacuum


If it pushes ok maybe hit them with a little 3 in 1 oil? Not too much or it'll drip on your carpet. We always oil wheels when they're in for service. ... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0586 seconds