Having problems with your Kirby Heritage II Vacuum ?

I,m down to the removal of the bust fan on my kirby heritage but how do i do this stage


Answers :

Ok so Once i took off the back/engine cover (lift the plastic near the switch theres another screww there) go the front and take out the 2 screwws that hold the hose attachment switch.
I you hold the fan and insert a strong bar/small screwwdriver in the hole on the splindle (dont use your needlenose pliers like i did cos they break!) turn er anticlockwise i think and it all comes loose easy enough

And thats pretty much it replace the fan and reverse your action to finish the job
thanx to those who wrote their answers
My problem is resolved. Thank You
Repair Help & Product Troubleshooting for Kirby Heritage II Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I,m down to the removal of the bust fan on my kirby heritage but how do i do this stage


Ok so Once i took off the back/engine cover (lift the plastic near the switch theres another screww there) go the front and take out the 2 screwws that hold the hose attachment switch.I you hold the fan and insert a strong bar/small screwwdri ... Kirby Heritage II Vacuum

Kirby Heritage II 2HD Vaccum Cleaner. I have removed the housing and reached the motor shaft for the vacuum fan. How do you remove the fan from the shaft.


Hi, you can visit this site to view how to remove the fan from the shaft...http://www.diyonline.com/servlet/GIB_BaseT/diylib_article.html?session.docid=1678Take care ... Vacuums

Bad fan how to remove fan on kirby heritage 2 legend vacuum cleaner.


There might be latex sealant around the perimeter of the fan casing. This was the case with my G3. The latex sealant prevents dust from blowing out of the fan "chamber" while it's running and under positive pressure. And as reddevil16 said, the spind ... Kirby Ultimate G Bagged Upright Vacuum

I need to replace the fan blades on a Kirby Heritage II, Model 2HD, vacuum cleaner. How do I remove the drive shaft that the fan is mounted on? Thanks, Robert Croft


... Vacuums

How to remove a Kirby Heritage II Armature


The armature that holds the fan on is reverse threaded. It turns to the right to remove it. You can put a nail or nail punch in the hole on the armature and tap it gently to the right. this should loosen it enough to unscrew. There's a washer, ... Kirby Heritage II Vacuum

How to change the fan in kirby heritage 2 - Kirby Heritage II Vacuum


This site has a great tutorial on how to do it. I did it myself and it worked out great. Get the parts online or at your ... Kirby Heritage II Vacuum

Kirby Heritage 2 fan replacement


Take the bag asm. and handle off. Then remove the plastic strip covering the switch, remove the screw there, remove the 3 screws on the housing, turn it over and loosen the screw near the back, the housing should come off. Then remove the screws on ... Kirby Heritage II Vacuum

Kirby G3 made loud noise when running. Sprayed silicon in fan thinking it might be a bearing. Found a coin and nail in fan and removed. Tha vacuum would not turn on. Replaced switch and brushes. Still nothing. Did the silicon spray do something?


No - the silicon is an insulating material and would have no effect on the electrics of the vacuum. Most likely you have a bad connection - dismantle the vacuum again and check the wiring and the motor with an ohmmeter. Be very attentive with the bru ... Kirby Generation 3 Bagged Upright Vacuum

Kirby Heritage 1HD


This site may help\015\012\015\012http://reviews.ebay.com/ ... Kirby G4 Bagged Upright Vacuum

How do I get the case apart on my Kirby Heritage II (2HD) to replace the fan impeller? I can only find 3 screws holding it and there seems to be more.


From the rear, there are 3 screws on right and one on the lower left. There is 1 more on the front at the top just under the lamp. You will also need to remove the safety switch - the plastic thing down and just right of the front screw. Tak ... Kirby Heritage II Vacuum

How do i remove the fan - Kirby G4 Bagged Upright Vacuum


Hello, stacyI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would t ... Kirby G4 Bagged Upright Vacuum

Kirby Heritage II. Beater bar does not turn. One end rotates freely, but the other sticks, preventing the bar from rotating. No obvious means to disassemble the end of the bar. Is there a way to repair this, or does this require replacement of the beater bar? Did clean the front end assembly, and removed all hair, threads and similar obstructions.


The bearing is bad on the end that turns hard. You will need to purchase a new brush roll assembly. If the roller is older that 4 or 5 years, it should be changed anyway. The brush strips that scrub the carpet loose their strength after many years of ... Vacuums

I have a Kirby Dual Sanitronic '50' Vacuum Cleaner I bought in 1966. The motor does not start when I attach the belt lifter of the rug nozzle. When I remove the rug nozzle and detach the belt from the motor fan shaft the motor starts when I depress the nozzle switch and the power switch . Seems like the brushes in the motor are worn out. I do not have a manual for this unit. Can you assist me as to what newer unit is this compatible to and the problem I'm having at present??


... Kirby Vacuums

Where does the fan belt go? - Kirby Heritage II Vacuum


Hi There,\015\012\015\012The belt on your Kirby Hertiage is put on almost exactly like the video below. The only difference on your model is that the brush actually rests in the bottom plate itself rather then the bell housing like the ... Kirby Heritage II Vacuum

Have a Kirby Heritage II vacuum. Need to replace a split fill tube. How do I remove the outer cloth bag from the mini-emptor, and then how do I take off the old/attach a new fill tube?


This repair guide should answer all of your questions...http://reviews.ebay.com/HOW-TO-REPLACE-REPAIR-KIRBY-VACUUM-H ... Kirby Heritage II Vacuum

Kirby Heritage II Vacuum Carbon Brush Placement


Yes the carbon brushes float on the commutator and are spring loaded. the spring washer goes in the housing first then the other washer. let me know if you have any other questions ... Kirby Heritage II Vacuum

Replacing the fan hub on a kirby classic omega 1CB


I resolved the problem .I found a way to hold the armature shaft still while I unscrewed the pulley drive nut ,which must be removed in order to remove the vacuum fan.\015\012\015\012> There probably is a special tool somewhere that w ... Kirby Heritage II Vacuum

Fan replacement I found the part to replace my broken fan. I've remove many screws, but I can't remove, what seems to be, the obvious plate to get to the broken fan.


Http://reviews.ebay.com/KIRBY-VACUUM-REPAIR-HOW-TO-REPLACE-THE-FAN-IMP ... Kirby Ultimate G Bagged Upright Vacuum

Replacing the bearing behind fan on a kirby heiritage II 2hd


I don't know what model of Kirby you have but on all Kirby's that I know of you have to remove the fan. Here are two vid's on fan removal for a generation series vacuum. ... Vacuums

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

Trying to attatch the wires from the light kit to the fan but the blue and white wires from the fan have white caps on them covering the wire. Do these need to be removed in order to attach the wires with the wire nuts? If so, how are these white plastic caps removed?


They're called "wire nuts". Turn them counterclockwise to remove, lay the wires you need to join side by side with the ends of the bared sections even and screw the nut on. lp ... Vacuums

Where can I find kirby heritage vacuum brush belt 301282 and the vacuum bags for a 1984 kirby heritage?


... Vacuums

I need to replace the fan and am not sure Kirby G 4 A


Greetings from GoVacuum,\015\012\015\012We've shot a video showing you detailed instructions on how to replace the fan on a Kirby Generation vacuum cleaner. The video is in two parts below. If this video was helpful to you, please be s ... Kirby G4 Bagged Upright Vacuum

I need assistance infiguring out whats wrong with my hampton bay ceiling fan i believe its the romote for the 2 stage lights and 3 stage fan the lower light will flash on and off only i cha nged the battery and stiii will not function model no on remote is o;UC7080T THANK YOU PHIL HILLEN @ [email protected]


Hi phil,I think the battery you inserted are not in a good working condition since it was working well before you changed the battery,I will suggest you replace the batteries,if the problem persists then its obvious the problem is from the remo ... Vacuums

How to change belt on kirby heritage 2? - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0323 seconds