Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

My vacum is not powering up

\015 My kirby vacum does not start when I plugged in and push the star switch. Last time we used it it work fine. there is power in the electrical oulet. what could it be?\015

Answers :

Reason number 1 (not sure why Kirby Co. still has not fixed it) - improperly installed outer bag. You have to push the bag all the way to the unit so it presses the safety switch that is between exhaust and the vacuum shell

Reason 2 - defective cord - try wiggling it. If you know how to do it - try removing cord and supplying power directly to the unit using another cord or wire (ONLY if you know how to work with electricity.If you get zapped - do not blame me)

Reason 3 - bad power switch (instructions on how to replace it HERE)

Reason 4 (very unlikely) - motor KAPUT
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore vacum cleaner model 11628615801 has power but vacum motor doesn't work


... Vacuums

How do I change the belt on the Miele vacum SEB234/236 Power Plus (power head)


... Miele Vacuums

How do i replace the power cord on my breeze vacume? i cant seem to be able to split the vacume.


... Dirt Devil& Breeze Vision Canister Vacuum Vacuum

The brush on my Electrolux Ambassador III vacum stops turning after vacuming for only a few minutes every time I use it. The power nozzel is less than a year old and except for the brush not wanting to turn, it operates just fine. Any suggestions on how to fix the problem?


... Electrolux Vacuums

No power My Hoover S3765-040 WindTunnel Bagless Canister Vacuum does not seem to receive electricity to power the vacum. One day it worked and the next it did not. Any recommendations for a solution.


... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Power-Flite Vacum It don't have the sucking power it had


Check filters and the hose and make sure that nothing is plugged. Also check all of the seals, check to make sure there are no cracks on the door or on the back where the bag sits. ... Vacuums

No power Lost power while vacuming. Is there a fuse on the Hoover Breath Right uprite vacuu?


There should be a fuse next to the power supply. If fuse is good, than the power supply is faulty. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I have the Bissell power force bagless upright vacume and I took the filters off and cleaned them and don't know where the round filter goes to be able to continue vacuming.


I had shortly after posting the question requesting help and then found the product manual.\015\012\015\012Thank you very much though. ... Bissell Vacuums

Power head turns on and works the power that turns vacum on not


If the suction motor doesn't come on but the brush motor does, you have a bad vac motor. If neither motor runs, it's probably a cord problem. Most parts for these are not available anymore. ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

I have my vacume electrical cord tangled inside and disconnected (I can see the open end of the connection from the power cord collector wheel! I need to take the vacume apart so get access to the wire inside. I need to know if there is something else to open other than the 4 screws. Your help is highly appreciated in advance.


Since you did not provide a model number for your vacuum, it is difficult to provide any precise directions regarding disassembly.\015\012\015\012However, most vacuum cleaners are fairly straightforward machines, and as long as you unplug ... Vacuums

Kenmore vacum wand power cord


Http://www.vacsew.com/vacuum-cleaners/kenmore-vacuum-parts.html/Try here ... Vacuums

My vacum is not powering up


Reason number 1 (not sure why Kirby Co. still has not fixed it) - improperly installed outer bag. You have to push the bag all the way to the unit so it presses the safety switch that is between exhaust and the vacuum shellReason 2 - defe ... Kirby Ultimate G Bagged Upright Vacuum

My simplicity 6 series 6770 vacume has no power to it...plug it in turn on switch and nothing happens


... Vacuums

Dyson dc05stduk vacum cleaner need to replace power cable


Hi \015\012\015\012Try this site does manuals on Dc05 repairs.\015\012\015\012http://dysonmanuals.llc.nu ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Filter queen vacume power switch


... Filter Queen Majestic Canister Vacuum

Was vacuming floors and it just q2uit no power


The most common thing would be a bad cord. It could also be a switch, the heat sensor or fuse(depending if you have one on that particular model). All of these can be tested with a continuity tester. \015\012\015\012It could ... Eureka Vacuums

Miele cannister vacume power head not working


Take me off your list ..... tell people that their is a charge before they give personal info .....rip off!!!!! ... Miele Red Star Bagged Canister Vacuum

1 ) how do you open the body of the vacum ? 2) How to replace the power cord? Epic 6500 sr


Very Carefully! LOL! Disconnect the hose from the door. Open the door. Remove the bag. Flip the vacuum on its top. You will then need to remove the trim pieces from the sides by sliding them toward the front of the machine(bag opening). Usually they ... Electrolux Epic 6500 Vacuum

My vacum has no suction power it spray the shampoo but it won't **** it up. Thnis Vacuem is a Bissell 9400


Make sure the selector for carpet or tools is set to floor. also make sure water tank is seated well. clean filter in tank.make sure tank seals are in tact. good luck ... Vacuums

How to change the power switch on a D4SE Rainbow Vacum


Hi there SmartAlec From NelsonVacuums.com.au here. Ok the switch is a tricky one if you havent done it before but the trick is having the right tool. I assume you have got the machine stripped to that point (phillips head screwdriver is all thats req ... Vacuums

Does a bissell power force vacum blow out air


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Kenmore progressive mod. 116.25615500 vacum cleaner. Wire harness pulled out of handle and is on the power brush. Can iI just reinstall it harness is still in good shape? Thank you


... Kenmore 25614 / 25615 Progressive Bagged Canister Vacuum

My sebo does not seem to be picking up stuff off carpet, what can i do. When I use the hose apart from the vacum it does having sucking power.


Unlike most vacuum cleaners, the Sebo Felix has two separate motors - one for the suction and one to drive the brush roll - so there are several things to check. You say the hose has suction, so the problem is in the lower part of the machine. First, ... Sebo Felix Classic Bagged Upright Vacuum

Where can I get a new power head and hose for this vacum


The Eureka central vacuums generally have standard inlets. You can use any brand with what you have. The most important thing you will need to decide on is electric vs non-electric. The brands attachments I would recommend are Imperium, Beam, and ... Eureka 1810 Central System Vacuum

I want to install a belt on the turbo power 2000 upright vacum cleaner , What do I have to do to install it. The old belt broke.


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564997\015\012Generic problem for all Vacuums\015\012I want to install a\015\012Posted by mcpo on May 02, 2008 ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0318 seconds