Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

I don't understand how to get the kirby belt on!

\015 I don't understand how to get the kirby belt on. I read the instruction manual and it doesn't explain anything. When I think I have the belt on right, I turn on the vacume and the roller thing on the bottom is not spinning.\015

Answers :

It's very easy: take off the nozzle, make sure the green arrows allign, then turn the knob anti clockwise untill the red arrows allign, make sure the belt is on the hook[ look at the back of the nozzle and loock in the hole to see if the belt on the hook. Now and only now you put the nozzle back onto the machine. the you turn the knob clockwise untill the green arrows allign...........
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I don't understand how to get the kirby belt on!


It's very easy: take off the nozzle, make sure the green arrows allign, then turn the knob anti clockwise untill the red arrows allign, make sure the belt is on the hook[ look at the back of the nozzle and loock in the hole to see if the belt on the ... Kirby Ultimate G Bagged Upright Vacuum

Kirby belt my belt on my kirby ultimate g came off and I can't figure out how to get it back on please help!


Check out my online guide. I also have instruction manuals!\015\012\015\012http://reviews.e ... Kirby Ultimate G Bagged Upright Vacuum

Information on how to replace belt on kirby g4 . I am turning the belt square, but cant get belt to attach.


Body {\012\011background: #FFFFFF;\012\011margin: 0px;\012\011padding: 4px;\012\011font-family: arial, verdana, sans-serif;\012\011font-size: 10pt;\012}\012p {\012\011margin:0px;\012\011padding:0px;\012}\012.spwrap\012{\012background: transparent url ... Kirby G4 Bagged Upright Vacuum

Belt replacement i am trying to replace the belt on my kirby g4 and i can not get the rooler off to replace the belt. if you could tell me how to do this it would be great.


Lift the light bulb housing up and you will find a latch that will rotate to release the front agitator housing and remove it from the machine. On the bottom of that housing, there are two latches that secure the bottom plate that covers the roller. ... Kirby G4 Bagged Upright Vacuum

My belt broke on my kirby upright, I took the roller off and put the new belt on, but I cant get the hook to hook on the belt.


On the front of the nozzle is a big knob that you turn to load the belt. Take the nozzle of of the vac, turn the knob to catch the belt, keep turning it until it stops. You will know if the it caught the belt, it will be hard to turn. Put the nozz ... Vacuums

Oreck vaccum when i put a new belt on, the belt rubs the side of the wall of the vacuum gets real hot and busts. is there any type of washer fitting that goes on the vacuum to hold the belt in place? i dont know i need help thank you. you can reach me at [email protected]


The belt must not be running true to the pulley. You may need a brush roll, but also check the motor to make sure it isn't moving inward after the belt is put on. ... Oreck XL Ultra Bagged Upright Vacuum

How do I get this darn belt back on my Kirby?


Hello,We've actually shot a very helpful video repair on how to change the belt on your Kirby. Also, at the end of the video it shows you how to put the head of the vacuum back on properly. This video also gives you instructions on ho ... Kirby G4 Bagged Upright Vacuum

Replace belt and dyson vacuam cleaner, model dc14 I ordered a new belt and brush replacement assembly and we can't seem to understand how to get it apart to change it


If the DC14 has a brush protected aspect i.e. a switch on the front that puts the drive belt off, the drive belt would have to be replaced by a professional repairer as this can't be done at home. \015\012\015\012If the model doesn't have the b ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

I am very unhappy with my Kirby. It's nothing like the demo they showed me. It won't even get lint off my bedroom carpet and I only had it for less then 2 months and the belt broke. I want my money back and I'll give the Kirby back!


Give it back to your kirby dealer. ... Kirby Vacuums

Need to replace 2 belts on the Panasonic MC-UG302 upright hoover and I dont know how to do it. Is it possible to get a brief discription/diagram of fitting belts from somewhere. Tks


... Panasonic Vacuums

Cannot get the belt on my kirby sentria - Kirby Ultimate G Bagged Upright Vacuum


If you go to this Utube site you will be able to view different videos on the vacuum and even one about putting the belts on.\015\012\015\012Be well.\015\012\015\012Paul ... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby Heritage II which normally works amazingly well, but it's not playing at all nicely today - and of course we have apartment inspections tomorrow. *dies* The belt broke today (as did the replacement belt, which I'd bought at the same time, so apparently the rubber was old), so I went over to Stark's to get some new ones - but it still won't cooperate. I've taken the head apart and put it back together several times, to be sure that everything is properly seated, but it's just not


... Kirby Heritage II Vacuum

Burning smell There is a burning smell when I run my Kirby Ultimate G.  The smell seems to be coming from the belt.  I looked at the brushes and they are spinning so the belt is working.  the Post on the vacuum is getting very hot not sure if that is normal.  What is causing this?


Unlock the sweeper brushes and take them out. on each end is a cup bearing and should be free of debris.then check around and under the belt and likely there is debris wrapped around it.the post is getting hot as your pulling too much of ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G3 I threw out my last bag for my kirby. I have an other model and now i dont know which type I need to get. I have 4 Style #2 bags but they are not the right ones... Help!


Beginning with the G series, G3 and G4 had round openings for the dirt intake. Prior models had oval so they will not fit, so find G3 or G4 bags and you will be set ... Kirby Generation 3 Bagged Upright Vacuum

I have a kirby sentria vaccum carpet shampoo system and I cannot get the shampoo suction head to work! It comes on but the belt is not turning. I have tried taking it off and looking at the assembly but no luck. And I have tried turning the belt engage lever to off and on to see if it makes any diference.


I had the same problem at first but figured it out. Make sure before you put it on the vacuum itself, that the shampooing unit is completely together. The belt needs to be taunt like it would be when the brush is turning. Once you put it on and turn ... Vacuums

My belt broke on my kirby G-5. I havent put a belt on it in 10 years. I having problems getting it on.Can u tell me the right way? Thank you.


Greetings,\015\012\015\012I recorded a video repair of replacing the belt for the Kirby generation vacuum cleaner. The following video will walk you through step by step on how to replace your Kirby belt, as well as doing some basic mai ... Kirby Ultimate G Bagged Upright Vacuum

I can't turn the belt off of my Kirby vacuum. I had the front off of it earlier to attach the hose, but now when I put the front back on, I can't get the belt to turn off. The lever twists about 3/4 of the way around, but will not go the rest of the way.


Turn the front part to the green so it is level and then twist the front to the red make sure the belt catch the hook as you twist it then if the belt is hooked just put it back on the vac like normal and lock it in place then twist it back to the gr ... Kirby Ultimate G Bagged Upright Vacuum

How to i get the belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Complete instructions how to change/attach the belt you can see on our website:http://www.goodvac.com/articles.asp?id=143Good luck,Rocky ... Kirby G4 Bagged Upright Vacuum

I cannot get the belt onto the motor shaft on my sentria kirby vacuum


Here is a video of belt change ... Vacuums

Kirby is smoking and breaking belts


First thing , make sure that the roller brush is turning freely.. should spin like a top.. free and easy, if not that is the problem\015\012the bearing on the ends are seized up and it isnt turning and you belt is turning on the motor shaft, th ... Kirby Ultimate G Bagged Upright Vacuum

I can't get the shamooer brush re-installed back on my Kirby Sentria after replacing the belt.


Try this link for a step by step guide...http://reviews.ebay.com/KIRBY-CARPET-SHAMPOO ... Kirby G6 Bagged Upright Vacuum

I have a SEBO air belt k. The wire retraction is not working. I dont see how to get a look at the mechanism. Can you help?


OK, but be warned... it's not so difficult getting the thing apart, but making a neat job of reassembly has been known to drive grown men to despair. And that's because you have to remove the airbelt. But first things first:1. remove the ... Sebo Air Belt K2 Bagged Canister Vacuum

My Kirby 2HD has started making an odd roaring noise but still works fine. I have taken the front assembly off and cleaned and adjusted the roller and checked the belt. The noise seems to come from the motor housing. I have tried to wiggle the main shaft at the front (bearings?) and it seems tight. Can't seem to get the other housings apart. Any ideas? Thanks, John


It is quite possible, it just needs lubed. The motor comes in direct contact with dirt so, you have to make sure the front bearing has a drop of oil on it from time to time. If it starts to scream at you within one month, after oiling, the bearing ... Kirby Heritage II Vacuum

I HAVE A G4 KIRBY. I CANT FIGURE HOW TO GET BELT ON TO TURN BRUSH.


Think this one on utube video how to ... ... Kirby Ultimate G Bagged Upright Vacuum

I can't get the new belt on my kirby - Vacuums


I can't get the new belt on my Kirby\015\012 \015\012I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.\015\012The Kirby Vacuum has a removable hea ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0790 seconds