Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

Kirby Ultimate G wheels lock up when in drive...

\015 It's about 5 years old and all of a sudden the large rear wheels lock up when it's in "drive mode" to vaccum carpets. How do I fix this?!\015

Answers :

Replace the transmission. The tranny that drives these Kirbys can give you problems.
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby Ultimate G wheels lock up when in drive...


Replace the transmission. The tranny that drives these Kirbys can give you problems. ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Ultimate G self propelled drive unit locked up


No, you just need to take it to a shop for repair. ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G5 rear wheels lock up completely when in "Drive"


When wheels lock when vacuum is OFF - it is normal. If it happens when Kirby is ON then there are a few things that may have gone wrongPrimary drive belt is broken or something is wrong with plastic gears. See how to check the primary dri ... Kirby G5 Bagged Upright Vacuum

My kirby vaccum has tech drive and it is stuck in reverse. The wheels spin backwards up lock up when I push it forward


... Kirby Ultimate G Bagged Upright Vacuum

Hi. This is a Kirby Vacuum model G7D. The Ultimate G series. Have problem with Neutral/ Drive lever on back. Very difficult to operate, very stiff and sometimes impossible to change gears. Torx head s


Manual on how to do it - take a look HERE ENJOY ... Vacuums

Kirby ultimate G .accessory lock is striped. Can that be replaced?


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=559479\015\012Kirby ultimate G .accessory lock is striped. Can...\015\012Posted by goulds5 on Apr 30, 2008\0 ... Kirby Ultimate G Bagged Upright Vacuum

Kirby drive selector - Kirby Ultimate G Bagged Upright Vacuum


Go here > http://www.goodvac.com/kb_results.asp?ID=16 ... Kirby Ultimate G Bagged Upright Vacuum

G5 Kirby. Works in Neutral fine. When Drive is engaged and I push forward, the wheels do not rotate forwards, however on the pullback stroke the wheels rotate backwards. What causes this? Something is clearly in the wrong position, so a diagram showing the correct position of the part that is affected would be useful.


Hello, anjeI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

My Kirby G4 self-propelled wheels stick at times while in Drive?


... Kirby G4 Bagged Upright Vacuum

Wheel and lever fell off Kirby ultimate G


The spline shaft is probably worn. you will have to replace the assy. ... Kirby Ultimate G Bagged Upright Vacuum

The TechDrive fell out of my Kirby Ultimate G. This is the lever you step on to make the wheels move freely when vacuuming. How do you fix it?


... Kirby G5 Bagged Upright Vacuum

The right, front wheel on my Kirby Ultimate G won't stay on. It seems to only be held on by friction, and I've hammered it and put plumbers teflon tape to tighten, but it still comes off within 5 minutes of vacuuming. Any solution would be greatly appreciated!


Epoxy! ... Kirby Ultimate G Bagged Upright Vacuum

Wheel fell off - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

The wheels fell off. - Kirby Ultimate G Bagged Upright Vacuum


The wheels are held to the axles with small c-clips. Perhaps these have come loose. If the wheel is still attached to part of the axle. The axle has broken and will need replacement. ... Kirby Ultimate G Bagged Upright Vacuum

Height adjustment wheel came off - Kirby Ultimate G Bagged Upright Vacuum


Adjust according with the instru manual or download the i.m from www. retrevo.com or www.fitness.manualsonline.com God bless you ... Kirby Ultimate G Bagged Upright Vacuum

HOW DO I REPLACE MY REAR WHEELS ON MY KIRBY G6...I WAS ABLE TO TAKE IT OFF BUT NOW WHEN I INSTALL ONE THE DRIVE SHAFT IS TOO SHORT TO INSTALL THE OTHERE??? PLEASE HELP


Try equalizing the space between the two wheels and the drive shaft. If it's not equal, they may not fit properly, or at all. ... Kirby Vacuums

How do i put the drive pedal back on a kirby ultimate G vacuum?


... Vacuums

I have a kirby ultimate g diamond series. The tech drive lever just fell off. How can I fix this?


Ouch...You need new pedal assembly. Just Google 558401S . I saw one for $16.10.You can try to fix it just you would have to install it back at a certain angle. clean shaft very well with alcohol so it is completely grease free and use a d ... Kirby Vacuums

Drive switch fell off. how do you fix this? - Kirby Ultimate G Bagged Upright Vacuum


Here's a free online guide to help with this problem...\015\012\015\012http://reviews.eba ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G5 - the Tech Drive does seem to have much power


You need either a new nutreal cam bracket assembly, that is what engages and disengages the tech drive.OR to adjust the handle pivot assy- diffucult . this is not for the faint of heart. it is possible to fix them as i used to repair kirbys, howeve ... Kirby G5 Bagged Upright Vacuum

Front wheel fell off Ultimage G Kirby vacuum


... Kirby G6 Bagged Upright Vacuum

Kirby Ultimate G runs heavy


Hi, I'm Jon IO used to sell these machines and I also own an Ultimate G, And sounds like to me it's a loose or broken transmission belt, I think you should have your local Kirby dealer take a look at it or even a good quality vacuum shop will be able ... Kirby Ultimate G Bagged Upright Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

My Viking Husqvarna, model number is 5430, is locked up. The control wheel for the movement of the needle is very tight. I have no instruction book. Does it have a lock on this wheel for transportation? This is a sewing machine my mother had, and she is gone now. Hope you can help. Thank-You.


... Vacuums

The drive on my Kirby G-5 is stuck in forward.


Motor housing will need to be removed and transmission a linkage adjusted. Take to a pro shop for this one. ... Kirby G5 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0274 seconds