Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

The sweeper is blowing out instead of sucking anything up

Answers :

Check for clogs. You can find how to do it on our website:

if you need any parts or supplies you can gert them on our website:

Lowest prices. Ready to ship the same day.

Good luck,
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The sweeper is blowing out instead of sucking anything up

Check for clogs. You can find how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=13if you need any parts or supplies you can ... Kirby Ultimate G Bagged Upright Vacuum

Brushes at bottom of vacuum are not sucking up anything. It seems like its blowing out instead of sucking on the bottom.

Blockage somewear ... Dirt Devil Vacuums

Modeol116.30012000, changed hepa filter, bag. vacuum seems to be blowing air instead of sucking dirt up. The bag collapses when turned on instead of blowing up with air. any ideas as to what is wrong? Thank you

... Kenmore Vacuums

Dysin vacuum blows air instead of sucking it!

If it is blowing air, then it is still clogged up somewhere, you didn't give your model number, but some of these have removable covers on each side and on the back. Also make sure that all covers are back on securely. ... Vacuums

Not sucking from bottom into bag, but blows out the side filter,..yet it DOES **** FROM HOSE ATTACHMENT. How can this be?...the.belt is fine recently replace, the rollers clean..I can feel anything i

Here is a diagram ,it's probably the hose behind the brush bar thats blocked.http://www.vacsite.com/en/bissell-parts-1/bissell-parts/3522-powerf ... Bissell 3522 PowerForce Bagged Upright Vacuum

Blowing insteading of sucking

Go online to HOOVER.com and locate your nearest repair facility. Take receipt with you to show it's a new purchase. ... Vacuums

Why is my Miele vacuum blowing air out instead of sucking in?

... Miele S251i Plus Bagged Canister Vacuum

Bissell proheat blowing out air instead of sucking in air

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Dysin vacuum blows air instead of sucking it!

Dysons aren't supposed to clog up, but they do. There a number of ports you can open to see if there are clogs in any of them. Usually a clog is why it will blow air and debris out instead of sucking. You just need to find it. ... Vacuums

It seems to blow air out instead of sucking up

Remove the bag on top and the plate on the bottom. Clean out the air passages, top and bottom, looking for a clog. When it seems clear, turn on the vacuum to see if air is moving through. Don't allow a full bag to remain in place Check the brush on t ... Hoover Tempo Widepath Upright Vacuum - Blue

Why is my bissell vacuum not sucking but blowing instead?

... Bissell 6594 PowerForce Bagless Upright Vacuum

Not sucking We have an Oreck XL and today it is blowing out dust instead of sucking it up. I just replaced the belt and about 6 months ago, we took it to our Oreck dealer and had it rehauled. I opened it up to check all and it all looked fine. Then I tuned on the machine while unzipped and noticed that the bad does not inflate as it used to. What can I do? Thanks, Connie [email protected]

You probable have a clog in the handle tube, or at the bottom, either by the brush or in the neck where the handle goes into. Unscrew that big black nut and pull the handle off of the bootom asm, then you can check it out and see where the clog is. ... Vacuums

My vacuum is blowing out instead of sucking in. It's blowing the cover of the hepa filter right off! What is causing this problem and how can it be fixed?

HelloPossible clogged hose.Run a broomstick or long pole through the hose to unclog it.Then check your prefilter should be down by the front light,should be washable.Last... be sure the hepa filter is clean an in the rig ... Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

Not sucking i have a KIRBY G3 that was working great. One day there was a strong smell and the brush roller belt broke so I replaced it. The fan looks good. Now the vacuum does not **** up dirt but instead seems to very gently blow air forward. I took the (new) bag off and it is blowing hard int the bag. I am stumped!

Belt is not connect to the drive pulley, see manual for fitting or see utube for video ... Kirby Generation 3 Bagged Upright Vacuum

Model number f 5912-900 hoover steam vav with clean surge.This is not the f5914 model........my new machine has 10 min. on it...in mid use it has stopped sucking and now is blowing more than anything, I took the front clear piece off as well as the black cowling/shroud and can find no obvious hoses to un-clog nor anything else to un-clog for that matter...I am looking for advise to fix this thing now, myself

Here is a list to go by for no suction problems that you can follow along with they are common proble\015\012Problem #1 Steamvac is not Sucking!If your Hoover Steamvac was working properly and suddenly it is not sucking any ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My vacuum blows air instead of sucking air. I have a dirt devil swivel guide. I got something stuck in the brush spinner, got it out...but now the vacuum doesnt suck stuff up anymore.

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=571660\015\012Generic problem for all Vacuums\015\012My vacuum blows air instead\015\012Posted by katweaver3 on ... Vacuums

Our vacuum blows instead of sucks

... Vacuums

My Oreck XL is blowing air and dust out instead if sucking.

... Oreck XL Ultra Bagged Upright Vacuum

Reverse operation We bought a VAX X5 vacuum three months ags. Now it is blowing out instead of sucking in. What happened?

You probably have a clog in either the dirt inlet down by the brush roll, or the hose itself is clogged. ... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum

Hi i have a dyson which appears to be blowing out instead of sucking in air....is there a switch i need to adjust?

This could be the  cyclone in the bin if it upside down or missing this can make the unit blow outwards it is common for this to happen i have known people to throw it away when they empty the bin if your not sure the google a picture of your un ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Suction Problem I took my unit to my work and used it, when I returned home it wouldn't suck up anything. I took the recovery take out and it has inward suction. Shouldn't that be outward, so it goes into the tank? It also blows out of the bottom by the brushes. I check the filter in the bottom and that is fine. Is it possible that it is somehow reversed the direction of the air flow (rotor running backwards)? I am perplexed. What am I missing?

There is a stand pipe seal where the bucket sits on, and if it isn't there or out of place could cause a suction problem like you said yours is doing. In the picture it is #10. The motor seal may have gone bad and is leaking # 15.\015\012 ... Hoover F7220900 SteamVac V2 Upright Vacuum

Its blowing instead of sucking - Hoover F5906-900 Upright Steam Vacuum

Make sure the removable panel in front of the recovery tank is pushed down tight. I had the same problem and that's all it took. ... Hoover F5906-900 Upright Steam Vacuum

It won't pick up the water and blows instead of sucks

Looks like a Dual V, I would check on the bottom to see if there are any blockages. and also above the dirty tank. Just try to clean out the filters and see if it helps, Good Luck! ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hello, we have a Miele cat and dog turbo 5000 vacuum cleaner which we bought in December. It has just started blowing air out of the grid on the top of the cleaner instead of sucking from the tube. The whole top section which is opened to change the bags doesn't seem to want to clip down properly either. Do you have any ideas> I'm gutted as it was so good until this happened. Thanks Michelle.

The lid not closing properly is almost certainly the cause of your problem. Without that lid sealed tight to the body you will get no suction through the hose. So, the question is: why isn't the lid clipping down properly? Did you just change the bag ... Vacuums

Shop vac My shop vac sucks dust in and instead of staying in the tank most of it blows out the blower hole. Ellen

Is the filter in place and in good condition. To find the filter just unhook the top and lift it off. ... Shop Vac (464-38-10) Canister Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0456 seconds