Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

I need to replace the power cord. what tools do i need


Answers :

The Kirby vacs have a 50year warranty. You sould contact the person you baught it from and have them replace it or if they gave you one (no labor is coverd on the warranty) then you will definately need a Philips screw driver and a tub to hold all the parts in while you work on it.
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to replace the power cord. what tools do i need


The Kirby vacs have a 50year warranty. You sould contact the person you baught it from and have them replace it or if they gave you one (no labor is coverd on the warranty) then you will definately need a Philips screw driver and a tub to hold all th ... Kirby Ultimate G Bagged Upright Vacuum

I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.


Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing co ... Vacuums

My dog chewed through the power cord on my Dyson DC15. I have purchased a new power cord and need instructions on how to remove the old one and replace it with the new one.


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

I have a Hoover Wind-tunnel Vaccum (Model U5433-900) that needs a new power cord. I am looking for step by step directions for replacing the power cord


... Hoover Vacuums

Need to replace power cord on Hoover windtunnel need wiring help


Without seeing this it would be difficult to describe. I would take it to a vac shop and let him show you. there are no real schematics for the wiring of these units. I usually would cut off the cable with a few inches of insulation to know where to ... Hoover U5399-900 WindTunnel Lite Upright Vacuum

Need to replace power cord and can't find how to open canister to replace


I had the same problem and could not find the other screws. You need to pry off the power cord retraction button, you will find two more screws under there. It's pretty easy after that!!!! ... Kenmore 22612 Bagged Canister Vacuum

Need to replace power cord on Hoover vacuum.


Remove the dirt container and look for screws. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Need to replace the power cord


Pry out the clear plastic covering the Fins going around the body\015\012Surprise no fins in there but there are some screws ... Rainbow E series Canister Wet/Dry Vacuum

I need to replace power supply. where the cord


Greetings from GoVacuum.com,Unfortunately there is no fuse on a Kirby Generation model. In my 10 years of repairing Kirby's as well as other vacuums I will tell you that 9 times out of 10, when a Kirby Generation doesn't turn on, it's the ... Kirby Generation 3 Bagged Upright Vacuum

Damage power cord needs to be replaced on Bissell 3920


... Bissell 3920 Bagless Upright Vacuum

The iron needs a new power cord; however, the screw at the back of the iron seems to need a hollow star driver. What tool do I need?


You've identified it in your question. These screws are just one type of so-called "security" screws (there are many others) that are designed to be turned only with a driver that matches the head. You can often get these screws to turn with a small ... Vacuums

The power cord on a flat iron broke/got chewed through and needs to be replaced. how can I open it to get at the cord or fix the cord?


... Vacuums

Motor/Fan does not run. I have removed and taken the top of the canister plastic motor housing apart and tested for power. I have power through the cord to the switch and power from the switch to the two wire terminals. I have not removed the motor. Looks like I will need special tools to take out the motor. The Vac looks almost new. It has been setting for several years. What do you think?


Sorry to read about your problem, I hope this helps you out.Well you can order a new motor at shop vac, check out this link.you dont have to remove to check the motor, just connect power to the motor leads ... Shop Vac QPMH450 Canister WetDry Vacuum

Need to replace power cord


Here are the Sears links to purchase both the part and the manual.\015\012\015\012http://www.searspartsdirect.com/partsdirect/searchByPartDescAction!searchByPartDescription.pd?brandId=0582&productCategoryId=0645000&modelNumber=116339223 ... Kenmore 22612 Bagged Canister Vacuum

While replacing my power cord on my DC25 a spring popped out I have no idea where it goes. I need a diagram so I can see where it goes


Here is how the switch assembly should go together: ... Dyson DC25 All Floors Bagless Upright Vacuum

Need parts diagram for euro-Pro ep601. I need to replace the power cord, but cannot get the motor gasket guard off.


Hi!You need to release a "clip" under the handle(this is on top of the dust cup) and then look for a hidden screw right under the thermostat label. ... Vacuums

My kenmore progressive caniser needs a new power cord. the plug had one of the metal prongs break on the plug. how can I replace the cord? model 22812201


I do not know if you want to replace the replace the power\012cord or the receptacle for the power wand?\012\012If you need the prong for the power cord you can purchase a\012replacement power plug from a local hardware store and it will functi ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I need to replace the power cord.


You need to remove the handle and the front housing then you'll see where the connections meet. Then you should able to get it off and replace it. ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

Need to replace power cord for bissell model 6585


A BISSELL Authorized Service Center should be able to help you out. You can find one nearest to you and call them first if you want: \015\012http://www.bissell.com/service-centers/?zip=Enter%20your%20zip%20code&distance=50&cid=ccsocial ... Bissell Vacuums

Replacing Power Cord to Power Nozzle


The height adjust mech. has 2 tabs, that you have to unlock, It also is easier when you tip the power head so as not to puit pressure on the Ht. Adj. wheels. Use a flat blade screwdriver and if you look down bertween the ht. adj. mech. and the elbo ... Kenmore 22812 Bagged Canister Vacuum

I need to replace the power cord on my Eureka 2271, and would like know how to get into the connections?


... Eureka 2271 Bagged Upright Vacuum

Need to replace the power cord - Ridgid 25648 Wet/Dry Vacuum


... Ridgid 25648 Wet/Dry Vacuum

POWER CORD DAMAGED AND NEEDS REPLACING. wHAT IS THE SECRET TO OPENING THE SWITCH MECHANISM ON MY DC03. I LIVE IN A REMOTE AREA AND CAN'T JUST DUCK IN TO A SERVICE AGENT. CHEERS, KINGSLEY DYSON


I am not an expert to this kind of machine but I can share with you this link below which I am sure would be a big help to you. Good luck. http://www.sparesaver.com/help-and-support/dyson-section/dyson-hints-and-tips-451/dyson-dc03-hints- ... Dyson Vacuums

Took canister apart to replace power cord. some grid fell out before i could see where it was. need to know where it goes


... Oreck BB2000 XL Little Hero Canister Vacuum

I have a Electrolux Oxygen model 6996 A. The power head and the dog hair hand tool no longer spin. What wouod cause this and what part would I need to replace if necessary. I have owned this for 6 years (7 kids, 2 dogs) and it is an amazaing vacuum! Thank you. Susan


... Eureka Oxygen 6996 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0896 seconds